[meta-freescale] No HDMI video on imx6qsabresd with dizzy
Nikolay Dimitrov
picmaster at mail.bg
Sun Nov 16 17:41:27 PST 2014
Hi Fabio,
On 11/14/2014 12:36 PM, Fabio Estevam wrote:
> Hi Nikolay,
>
> On Thu, Nov 13, 2014 at 8:22 PM, Nikolay Dimitrov <picmaster at mail.bg> wrote:
>
>> Sorry for the confusion. After I modified U-Boot, I didn't observed the
>> issue. Btw, after seeing your comment I went and reverted the change
>> just to be sure what's happening. And it turned out that you're right,
>> the issue can again be reproduced as described in #6703. Just to be
>> more clear, here's what I've tested:
>>
>> 1. Unmodified U-Boot, HDMI cable connected during power-on: kernel hangs
>> 2. Unmodified U-Boot, HDMI cable connected later: works OK
>> 3. Disabled U-Boot video, HDMI cable connected during power-on: works OK
>> 4. Disabled U-Boot video, HDMI cable connected later: works OK
>
> Does it work if you use the original U-boot and use the proposed fix
> from this thread?
> https://community.freescale.com/thread/327503
>
> If so, could you please prepare a patch?
>
> Thanks
I haven't forgot this one, but will do it later, as I'm being pushed for
high-priority issues at the moment.
Regards,
Nikolay
More information about the meta-freescale
mailing list