[meta-freescale] No HDMI video on imx6qsabresd with dizzy
Fabio Estevam
festevam at gmail.com
Fri Nov 14 02:36:41 PST 2014
Hi Nikolay,
On Thu, Nov 13, 2014 at 8:22 PM, Nikolay Dimitrov <picmaster at mail.bg> wrote:
> Sorry for the confusion. After I modified U-Boot, I didn't observed the
> issue. Btw, after seeing your comment I went and reverted the change
> just to be sure what's happening. And it turned out that you're right,
> the issue can again be reproduced as described in #6703. Just to be
> more clear, here's what I've tested:
>
> 1. Unmodified U-Boot, HDMI cable connected during power-on: kernel hangs
> 2. Unmodified U-Boot, HDMI cable connected later: works OK
> 3. Disabled U-Boot video, HDMI cable connected during power-on: works OK
> 4. Disabled U-Boot video, HDMI cable connected later: works OK
Does it work if you use the original U-boot and use the proposed fix
from this thread?
https://community.freescale.com/thread/327503
If so, could you please prepare a patch?
Thanks
More information about the meta-freescale
mailing list