[meta-freescale] i.mx6dlsabresd linuxptp issue

[Daiane Angolini]

On Mon, Mar 3, 2014 at 11:40 AM, Hans-Peter.Rosinger at freescale.com
<Hans-Peter.Rosinger at freescale.com> wrote:
> Hi,
>
>
>
> I got an issue bitbaking fsl-image-test for i.MX6DL SabreSDP - it seems
> related to linuxptp - I am not even sure why its building that block?

If you don't need this package, please, customize your image to remove that ;-)

>
> Attached is my local.conf file...

Have you reported your error in  freescale community? Please, report
it and share the topic with me.

Daiane
>
>
>
> ERROR: Function failed: do_configure (log file is located at
> /home/hp-lablinux/yocto-imx-sdk/build_fsl-image-test/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linuxptp/1.3-r0/temp/log.do_configure.22415)
>
> ERROR: Logfile of failure stored in:
> /home/hp-lablinux/yocto-imx-sdk/build_fsl-image-test/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linuxptp/1.3-r0/temp/log.do_configure.22415
>
> Log data follows:
>
> | DEBUG: Executing python function sysroot_cleansstate
>
> | DEBUG: Python function sysroot_cleansstate finished
>
> | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
>
> | DEBUG: Executing shell function autotools_preconfigure
>
> | DEBUG: Shell function autotools_preconfigure finished
>
> | DEBUG: Executing shell function do_configure
>
> | NOTE: nothing to configure
>
> | sed: no input files
>
> | WARNING:
> /home/hp-lablinux/yocto-imx-sdk/build_fsl-image-test/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linuxptp/1.3-r0/temp/run.do_configure.22415:1
> exit 123 from
>
> |   xargs sed -i 's,^\(CC\|CFLAGS\|prefix\|AR\)=,\1 ?=,g'
>
> | ERROR: Function failed: do_configure (log file is located at
> /home/hp-lablinux/yocto-imx-sdk/build_fsl-image-test/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linuxptp/1.3-r0/temp/log.do_configure.22415)
>
> ERROR: Task 5
> (/home/hp-lablinux/yocto-imx-sdk/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/recipes-connectivity/linuxptp/linuxptp_1.3.bb,
> do_configure) failed with exit code '1'
>
> NOTE: Tasks Summary: Attempted 602 tasks of which 531 didn't need to be
> rerun and 1 failed.
>
> Waiting for 0 running tasks to finish:
>
>
>
> Summary: 1 task failed:
>
>
> /home/hp-lablinux/yocto-imx-sdk/sources/meta-fsl-bsp-release/imx/meta-fsl-arm/recipes-connectivity/linuxptp/linuxptp_1.3.bb,
> do_configure
>
>
>
>
>
> What is going wrong? How can I fix it?
>
>
>
> Thanks,
>
> Hans-Peter
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>