[meta-freescale] Cannot boot after the last update...

[Otavio Salvador]

On Wed, Jul 23, 2014 at 5:16 AM, Konstantin Kovalev
<lepeletie at hotmail.com> wrote:
> I have Freescale Sabre SD board on iMX6q processor.
> ***************************************************
> Build Configuration:
> BB_VERSION        = "1.23.1"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Fedora-20"
> TARGET_SYS        = "arm-poky-linux-gnueabi"
> MACHINE           = "imx6qsabresd"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.6+snapshot-20140723"
> TUNE_FEATURES     = "arm armv7a vfp neon callconvention-hard cortexa9"
> TARGET_FPU        = "vfp-neon"
> meta
> meta-yocto        = "(detachedfrom8b7116d):8b7116d25ed6255a03895d835e5a0560858ab496"
> meta-oe           = "(detachedfrom743751e):743751e20cc266143130fb5bb49efb4c86b9e02b"
> meta-fsl-arm      = "(detachedfromd900d93):d900d935e1f45a79c7116c4fd290baaa447a870d"
> meta-fsl-arm-extra = "(detachedfromc3b74cd):c3b74cd1de4fba69f14ef6366fdc15f11d32e485"
> meta-fsl-demos    = "(nobranch):e60ea240aecbf8fc69c4d18ab6d1361376372c6e"
> ***************************************************
> I use the master-next branch and fsl-image-multimedia-full.
>
> So my problem is that after "repo sync" on last friday I cannot boot the system from the resulting image from my SD-card.
> I have written the image by this command "sudo dd if=fsl-image-multimedia-full-imx6qsabresd.sdcard of=/dev/sdb bs=4M &&sync"
> There are two lines in boot log:
> *******************************************************************
> No filesystem could mount root, tried:  ext3 ext2 ext4 vfat fuseblk
> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,10)
> *******************************************************************
> I attached the full log.

Seems to be an issue with your uSD card or the card reader.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750