[meta-freescale] Cannot boot after the last update...

[Konstantin Kovalev]

Hello,
Some details:
I have Freescale Sabre SD board on iMX6q processor.
***************************************************
Build Configuration:
BB_VERSION        = "1.23.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Fedora-20"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "imx6qsabresd"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6+snapshot-20140723"
TUNE_FEATURES     = "arm armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta              
meta-yocto        = "(detachedfrom8b7116d):8b7116d25ed6255a03895d835e5a0560858ab496"
meta-oe           = "(detachedfrom743751e):743751e20cc266143130fb5bb49efb4c86b9e02b"
meta-fsl-arm      = "(detachedfromd900d93):d900d935e1f45a79c7116c4fd290baaa447a870d"
meta-fsl-arm-extra = "(detachedfromc3b74cd):c3b74cd1de4fba69f14ef6366fdc15f11d32e485"
meta-fsl-demos    = "(nobranch):e60ea240aecbf8fc69c4d18ab6d1361376372c6e"
***************************************************
I use the master-next branch and fsl-image-multimedia-full.

So my problem is that after "repo sync" on last friday I cannot boot the system from the resulting image from my SD-card.
I have written the image by this command "sudo dd if=fsl-image-multimedia-full-imx6qsabresd.sdcard of=/dev/sdb bs=4M &&sync"
There are two lines in boot log:
*******************************************************************
No filesystem could mount root, tried:  ext3 ext2 ext4 vfat fuseblk
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,10)
*******************************************************************
I attached the full log.
Please help!
Thanks in advance!

Best regards,
Konstantin. 		 	   		  
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: boot_log.txt
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140723/6e3a73ae/attachment-0001.txt>