[meta-freescale] [PATCH] imx6qdl-sabrelite: DT: Add I2C2/3 and HDMI support

[Fabio Estevam]

On Tue, Dec 2, 2014 at 5:52 PM, Gary Bisson <bisson.gary at gmail.com> wrote:

> I've attached both my full log and the EDID I read once booted up. The
> log shows that the fb0 modes seems not to reflect what should be
> supported.
> As a FYI, I've used a Nitrogen6-rev2 (SoC T1.2) for this test.

I would recommend to remove all the 'video=' parameters from the
kernel command line, as they do not apply to mainline.

Also, there is a known issue with ldb and hdmi working at the same
time. On my sabresd I can get HDMI to work with LVDS if I disconnect
and reconnect the HDMI cable or if I remove the LVDS node from dts.

Try to change your dtsi file so that HDMI becomes the only display output.