[meta-freescale] error configuring QTCreator

[Hugo Sampaio]

Hi community,

I have a wandboard solo and followed the QT tutorial (http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard) to configure QT creator. I'm using Daisy branch and everything went ok until I press the "run" button on QT creator. It shows the following error:

22:39:00: Running steps for project wand001...
22:39:00: Configuration unchanged, skipping qmake step.
22:39:03: Starting: "/usr/bin/make"
arm-linux-gnueabi-g++ -c -pipe -O2 -Wall -W -D_REENTRANT -fPIE -DQT_NO_DEBUG -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-arm-gnueabi-g++ -I../wand001 -I/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5 -I/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtWidgets -I/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtGui -I/opt/poky/1.6.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi/usr/include/qt5/QtCore -I. -I../../fsl-community-bsp/build/tmp/sysroots/wandboard-solo/usr/include/libdrm -I. -I. -o main.o ../wand001/main.cpp
make: arm-linux-gnueabi-g++: Command not found
make: *** [main.o] Error 127
22:39:04: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project wand001 (kit: wandboard2)
When executing step 'Make'
22:39:04: Elapsed time: 00:04.

I have tried adding setup-environment as described in the link below but it didn't work.
 (https://community.freescale.com/mobile/mobile-access.jspa#jive-discussion?content=https%3A%2F%2Fcommunity.freescale.com%3A443%2Fapi%2Fcore%2Fv2%2Fdiscussions%2F309578) 

Does anyone have a clue about this issue?

Thanks,

Hugo.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20140819/d92eb7ba/attachment-0001.html>