[meta-freescale] Sabrelite Boot

[Eric Nelson]

Thanks for the review Otavio.

On 06/18/2013 10:24 AM, Otavio Salvador wrote:
> On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
> <eric.nelson at boundarydevices.com> wrote:
> ...
>>> I'll put together another one that's a bit more definitive since
>>> things are now pretty stable.
>>>
>>
>> Silly me.
>>
>> I thought this would only take a few minutes, but I did put
>> together a U-Boot "Getting started" guide:
>>          http://boundarydevices.com/u-boot-on-i-mx6/
>>
>> Upgrading U-Boot is normally just a matter of placing the version
>> of U-Boot (file name u-boot.imx) and the script 6x_upgrade
>> on an SD card and running the "upgradeu" command as shown here:
>>
>>          http://boundarydevices.com/u-boot-on-i-mx6/#upgradeu
>
> The blog post is awesome; it just lacks one important information: how
> to program Boundary's U-Boot in case the user has did the Linaro's NOR
> overwirte? This would allow us to use:
>
I added a section on "unbricking":

	http://boundarydevices.com/u-boot-on-i-mx6/#unbricking

> --- imx6qsabrelite.conf
> #@TYPE: Machine
> #@NAME: Boundary Devices i.MX6Q SABRE Lite
> #@SOC: i.MX6Q
> #@DESCRIPTION: Machine configuration for Boundary Devices i.MX6Q SABRE
> Lite
>
> # WARNING: This board now use the *same* code as Nitrogen6X and it
> #          boots from internal SPI NOR memory. If you did change it to
> boot
> #          from the MMC (SD3 or SD4) please check the Boundary's blog
> post
> #          at: http://boundarydevices.com/u-boot-on-i-mx6/
>
> include conf/machine/nitrogen6x.conf
> ---
>
> Do you agree?
>

Yep. I agree.