[meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] u-boot-imx: update Congatec qmx6 support to bsp 4.0

[SARTRE Leo]

Le Tuesday 18 June 2013 16:27:05, SARTRE Leo a écrit :
> > If you have your boot pins (or fuses) correctly setup and flash it to
> > the correct offset, it should just boot, no?
> 
> When I try to flash a mainline U-boot (that works when I write it in SD
> card) into the SPI NOR, the board doesn't boot.
> The binary that I flash is a non-padded Uboot and I place it at the
> beggining of the SPI NOR.
> It seems that the same issue occurs with the sabrelite board (see
> https://wiki.linaro.org/Boards/MX6QSabreLite).
> 
Hi Fabio,

some news: you were right mainline Uboot can be flashed to SPI NOR.
I was trying to flash a non-padded Uboot into the SPI NOR, I've just try to 
flash the same binary with a block of 1024 bits of zeros padded on the top of 
it and it is working.

So now the only feature that is missing is the ethernet.

--
Léo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130618/4f9f32fb/attachment.html>