[meta-freescale] Can not build (configure) a simple Hello world program in eclipse with ADT
Thanassis Silis
djnass_18 at hotmail.com
Fri Jun 14 09:06:27 PDT 2013
hello everyone,
I am following the yocto Project Devel Manual ( http://www.yoctoproject.org/docs/1.4/dev-manual/dev-manual.html#adt-eclipse ) to set up eclipse for use with an embedded target . I am stuck in section 4.2.2.2 trying to make a simple autotools hello world application. The build fails at configure stage
checking for style of include used by make... GNU
checking for arm-poky-linux-gnueabi-gcc... arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon --sysroot=/home/nass/yocto/build/tmp/sysroots/imx6qsabrelite
checking whether the C compiler works... no
configure: error: in `/home/nass/eclipse/adt_hello/':
configure: error: in `/home/nass/eclipse/adt_hello/':
configure: error: C compiler cannot create executables
configure: error: C compiler cannot create executables
See `config.log' for more details
Configuration failed with error
config.log looks fairly similar to this post: https://lists.yoctoproject.org/pipermail/yocto/2013-January/013860.html
I have configured to use the toolchain from the build directory. In fact the paths to the toolchain and sysroots are (both):
"/home/nass/yocto/build/tmp/" .
I went on to try the slightly more manual in CLI : http://www.yoctoproject.org/docs/1.4/adt-manual/adt-manual.html#creating-and-running-a-project-based-on-gnu-autotools
again at configure stage, I get:
checking for gcc... arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon --sysroot=/home/nass/yocto/build/tmp/sysroots/imx6qsabrelite
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/home/nass/appz/dev/yoctauto':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
Should I really use --host? Wouldn't it be in the plugin setup options already if that was necessary? OR wouldn't the environment-setup* file contain the necessary declarations?
Any ideas how to avert it?
Thank you for your help!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130614/2751f5de/attachment.html>
More information about the meta-freescale
mailing list