[meta-freescale] Wandboard U-boot (2013.07-rc3) issues

[Diego Sueiro]

Folks,

I've built the u-boot 2013-07 version and burned it onto sdcard and the
issue still happens.

Here is the console output:

U-Boot 2013.07 (Jul 23 2013 - 23:25:04)

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
mmc0 is current device
Card did not respond to voltage select!
Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5



Abraços,

--
*dS
Diego Sueiro

Administrador do Portal Embarcados
www.embarcados.com.br

Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ

/*long live rock 'n roll*/


On Tue, Jul 23, 2013 at 5:53 PM, Otavio Salvador <otavio at ossystems.com.br>wrote:

> On Tue, Jul 23, 2013 at 5:49 PM, Fabio Estevam <festevam at gmail.com> wrote:
> > On Tue, Jul 23, 2013 at 5:42 PM, Diego Sueiro <diego.sueiro at gmail.com>
> wrote:
> >> Folks,
> >>
> >> I'm facing an issue on power-up sequence I get the below messages after
> >> bootdelay:
> >>
> >> mmc0 is current device
> >> Card did not respond to voltage select!
> >> Booting from net ...
> >> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> >> BOOTP broadcast 1
> >> BOOTP broadcast 2
> >
> > Please try 2013.07 instead and let us know if you face issues.
>
> This is ready for use in master-next; I am using it for netboot :-)
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130724/5fad84aa/attachment.html>