[meta-freescale] [meta-fsl-arm-extra PATCH 1/3] imx6qsabrelite: Remove specific setup and turn it as an alias to Nitrogen6X

[Eric Nelson]

On 07/02/2013 12:35 PM, Otavio Salvador wrote:
> This board now use the *same* code as Nitrogen6X and it boots from
> internal SPI NOR memory. If you did change it to boot from the MMC
> (SD3 or SD4) please check the Boundary's blog post at:
>
>    http://boundarydevices.com/u-boot-on-i-mx6/#unbricking
>
> Change-Id: I5ec3444afee65002f94c2d2de40662749e5a9070
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
>   conf/machine/imx6qsabrelite.conf | 18 +++++-------------
>   1 file changed, 5 insertions(+), 13 deletions(-)
>
> diff --git a/conf/machine/imx6qsabrelite.conf b/conf/machine/imx6qsabrelite.conf
> index 2155ba0..14409fb 100644
> --- a/conf/machine/imx6qsabrelite.conf
> +++ b/conf/machine/imx6qsabrelite.conf
> @@ -3,17 +3,9 @@
>   #@SOC: i.MX6Q
>   #@DESCRIPTION: Machine configuration for Boundary Devices i.MX6Q SABRE Lite
>
> -include conf/machine/include/imx-base.inc
> -include conf/machine/include/tune-cortexa9.inc
> +# WARNING: This board now use the *same* code as Nitrogen6X and it
> +#          boots from internal SPI NOR memory. If you did change it to boot
> +#          from the MMC (SD3 or SD4) please check the Boundary's blog post
> +#          at: http://boundarydevices.com/u-boot-on-i-mx6/#unbricking
>
> -SOC_FAMILY = "mx6:mx6q"
> -
> -KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabrelite.dts"
> -
> -PREFERRED_PROVIDER_virtual/kernel = "linux-boundary"
> -
> -UBOOT_MACHINE = "mx6qsabrelite_config"
> -
> -SERIAL_CONSOLE = "115200 ttymxc1"
> -
> -MACHINE_FEATURES += " pci wifi bluetooth"
> +include conf/machine/nitrogen6x.conf
>

Acked-by: Eric Nelson <eric.nelson at boundarydevices.com>