[meta-freescale] MX28 Put u-boot on SPI NOR

[Mårten Wikman]

I did write it with u-boots sf write command, I have also tried to use
mtd-utils in linux. Are there any special parameters I need to add to use
32-byte aligned?

2013/8/4 Marek Vasut <marex at denx.de>

> Dear Otavio Salvador,
>
> > On Sat, Aug 3, 2013 at 4:21 PM, Marek Vasut <marex at denx.de> wrote:
> > > Dear Mårten Wikman,
> > >
> > >> But then it's just u-boot without any bootstream? Is it really
> possible
> > >> that mx28 will boot without it? I can't find much information about
> how
> > >> to boot from spi nor on the internet. SD CARD boot and NAND boot are
> > >> well documented in  u-boot source code.
> > >
> > > Write u-boot.sb directly to the SPI NOR to offset 0x0 .
> >
> > He did this already, as said in his first e-mail. It seems he is
> > getting H0x80501003.
> >
> > I don't have the MX28 error code list here (just MX23) do you know the
> > meaning of this error code offhand?
>
> #define ERROR_ROM_LDR_SIGNATURE (ERROR_ROM_GROUP | ERROR_ROM_LOADER_GROUP
> | 0x3)
> 0x80501003 The file signature or file version is incorrect.
>
> The file in the NOR flash is corrupted. How do you write the file into the
> NOR
> flash ? I think the filesize might beed to be 32-byte aligned when writing.
>
> Best regards,
> Marek Vasut
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130804/a049bc15/attachment.html>