[linux-yocto] [PULL REQUEST] Broxton related backports for linux-yocto-4.4
Saul Wold
saul.wold at intel.com
Wed May 25 14:27:19 PDT 2016
On Wed, 2016-05-25 at 12:17 -0400, Bruce Ashfield wrote:
> On 2016-05-24 4:19 PM, California Sullivan wrote:
> >
> > Hi Bruce,
> >
> > This is a set of backports from upstream. I have tested
> > allyesconfig,
> > allnoconfig, and standard builds and can't find anything wrong
> > there.
> > I have also tested running the kernel on MinnowBoard Max and there
> > are
> > no new errors or warnings.
> >
> > Let me know if I need to make any modifications and send out a V2.
> No need for a v2. They look fine to me, and I've staged them on
> the kernel repo and have adjusted the SRCREVs. I'll send out the
> update in a day or so.
>
Did you actually push them to the linux-yocto-4.4 repo yet? Or are
they staged on your machine?
Sau!
> Bruce
>
> >
> >
> > Thanks,
> > Cal Sullivan
> >
> >
> > he following changes since commit
> > 628bf627561c6285d99fb978e11d4c15fc29324b:
> >
> > Merge tag 'v4.4.11' into standard/base (2016-05-19 09:02:42
> > -0400)
> >
> > are available in the git repository at:
> >
> > git://git.yoctoproject.org/linux-yocto-contrib
> > clsulliv/standard/base
> >
> > for you to fetch changes up to
> > 53e84104c5e68eb468823dd0d262a64623d01a55:
> >
> > mmc: mmc: Fix partition switch timeout for some eMMCs (2016-05-19
> > 17:15:25 -0700)
> >
> > ----------------------------------------------------------------
> > Adrian Hunter (3):
> > mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
> > mmc: mmc: Attempt to flush cache before reset
> > mmc: mmc: Fix partition switch timeout for some eMMCs
> >
> > Andy Shevchenko (12):
> > device property: always check for fwnode type
> > device property: rename helper functions
> > device property: refactor built-in properties support
> > device property: keep single value inplace
> > device property: improve readability of macros
> > device property: return -EINVAL when property isn't found in
> > ACPI
> > device property: Fallback to secondary fwnode if primary
> > misses the property
> > mfd: core: propagate device properties to sub devices drivers
> > mfd: intel-lpss: Pass HSUART configuration via properties
> > device property: avoid allocations of 0 length
> > lib/string: introduce match_string() helper
> > device property: convert to use match_string() helper
> >
> > Bamvor Jian Zhang (1):
> > gpiolib: do not allow to insert an empty gpiochip
> >
> > Christophe RICARD (2):
> > ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type
> > and export symbol
> > ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
> >
> > Dasaratharaman Chandramouli (1):
> > intel_idle: Support for Intel Xeon Phi Processor x200 Product
> > Family
> >
> > Gwendal Grignou (1):
> > mmc: core: Do regular power cycle when lacking eMMC HW reset
> > support
> >
> > Heikki Krogerus (4):
> > device property: helper macros for property entry creation
> > device property: the secondary fwnode needs to depend on the
> > primary
> > device property: fwnode->secondary may contain ERR_PTR(-
> > ENODEV)
> > device property: fix for a case of use-after-free
> >
> > Len Brown (2):
> > intel_idle: Add SKX support
> > intel_idle: add BXT support
> >
> > Linus Walleij (1):
> > Revert "gpio: revert get() to non-errorprogating behaviour"
> >
> > Mika Westerberg (7):
> > pwm: lpss: Remove ->free() callback
> > pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
> > device property: Take a copy of the property set
> > driver core: platform: Add support for built-in device
> > properties
> > mfd: intel-lpss: Add support for passing device properties
> > mfd: intel-lpss: Pass SDA hold time to I2C host controller
> > driver
> > mfd: intel-lpss: Pass I2C configuration via properties on BXT
> >
> > Qipeng Zha (1):
> > pinctrl: intel: make the high level interrupt working
> >
> > Richard Cochran (10):
> > intel_idle: remove useless return from void function.
> > intel_idle: Fix a helper function's return value.
> > intel_idle: Remove redundant initialization calls.
> > intel_idle: Fix deallocation order on the driver exit path.
> > intel_idle: Fix dangling registration on error path.
> > intel_idle: Avoid a double free of the per-CPU data.
> > intel_idle: Setup the timer broadcast only on successful
> > driver load.
> > intel_idle: Don't overreact to a cpuidle registration
> > failure.
> > intel_idle: Propagate hot plug errors.
> > intel_idle: Clean up all registered devices on exit.
> >
> > Wolfram Sang (1):
> > mmc: make MAN_BKOPS_EN message a debug
> >
> > qipeng.zha (1):
> > pwm: lpss: Update PWM setting for Broxton
> >
> > arch/x86/include/asm/msr-index.h | 8 +
> > drivers/acpi/gsi.c | 21 +-
> > drivers/acpi/property.c | 10 +-
> > drivers/acpi/resource.c | 26 ++
> > drivers/base/platform.c | 25 ++
> > drivers/base/property.c | 516
> > +++++++++++++++++++++++++++-------
> > drivers/gpio/gpiolib-acpi.c | 33 ++-
> > drivers/gpio/gpiolib.c | 17 +-
> > drivers/gpio/gpiolib.h | 3 +-
> > drivers/idle/intel_idle.c | 257 +++++++++++++++--
> > drivers/mfd/intel-lpss-acpi.c | 31 +-
> > drivers/mfd/intel-lpss-pci.c | 56 +++-
> > drivers/mfd/intel-lpss.c | 16 +-
> > drivers/mfd/intel-lpss.h | 2 +
> > drivers/mfd/mfd-core.c | 7 +
> > drivers/mmc/core/core.c | 5 +-
> > drivers/mmc/core/mmc.c | 39 ++-
> > drivers/mmc/host/sdhci.c | 7 +-
> > drivers/mmc/host/sdhci.h | 1 -
> > drivers/pinctrl/intel/pinctrl-intel.c | 5 +-
> > drivers/pwm/pwm-lpss.c | 57 ++--
> > drivers/pwm/pwm-lpss.h | 1 +
> > include/linux/acpi.h | 1 +
> > include/linux/mfd/core.h | 5 +
> > include/linux/platform_device.h | 5 +
> > include/linux/property.h | 99 ++++++-
> > include/linux/string.h | 2 +
> > lib/string.c | 26 ++
> > 28 files changed, 1037 insertions(+), 244 deletions(-)
> >
More information about the linux-yocto
mailing list