[linux-yocto] [PULL REQUEST] Broxton related backports for linux-yocto-4.4

Bruce Ashfield bruce.ashfield at windriver.com
Wed May 25 09:17:14 PDT 2016


On 2016-05-24 4:19 PM, California Sullivan wrote:
> Hi Bruce,
>
> This is a set of backports from upstream. I have tested allyesconfig,
> allnoconfig, and standard builds and can't find anything wrong there.
> I have also tested running the kernel on MinnowBoard Max and there are
> no new errors or warnings.
>
> Let me know if I need to make any modifications and send out a V2.

No need for a v2. They look fine to me, and I've staged them on
the kernel repo and have adjusted the SRCREVs. I'll send out the
update in a day or so.

Bruce

>
> Thanks,
> Cal Sullivan
>
>
> he following changes since commit 628bf627561c6285d99fb978e11d4c15fc29324b:
>
>   Merge tag 'v4.4.11' into standard/base (2016-05-19 09:02:42 -0400)
>
> are available in the git repository at:
>
>   git://git.yoctoproject.org/linux-yocto-contrib clsulliv/standard/base
>
> for you to fetch changes up to 53e84104c5e68eb468823dd0d262a64623d01a55:
>
>   mmc: mmc: Fix partition switch timeout for some eMMCs (2016-05-19 17:15:25 -0700)
>
> ----------------------------------------------------------------
> Adrian Hunter (3):
>       mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
>       mmc: mmc: Attempt to flush cache before reset
>       mmc: mmc: Fix partition switch timeout for some eMMCs
>
> Andy Shevchenko (12):
>       device property: always check for fwnode type
>       device property: rename helper functions
>       device property: refactor built-in properties support
>       device property: keep single value inplace
>       device property: improve readability of macros
>       device property: return -EINVAL when property isn't found in ACPI
>       device property: Fallback to secondary fwnode if primary misses the property
>       mfd: core: propagate device properties to sub devices drivers
>       mfd: intel-lpss: Pass HSUART configuration via properties
>       device property: avoid allocations of 0 length
>       lib/string: introduce match_string() helper
>       device property: convert to use match_string() helper
>
> Bamvor Jian Zhang (1):
>       gpiolib: do not allow to insert an empty gpiochip
>
> Christophe RICARD (2):
>       ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
>       ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
>
> Dasaratharaman Chandramouli (1):
>       intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
>
> Gwendal Grignou (1):
>       mmc: core: Do regular power cycle when lacking eMMC HW reset support
>
> Heikki Krogerus (4):
>       device property: helper macros for property entry creation
>       device property: the secondary fwnode needs to depend on the primary
>       device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
>       device property: fix for a case of use-after-free
>
> Len Brown (2):
>       intel_idle: Add SKX support
>       intel_idle: add BXT support
>
> Linus Walleij (1):
>       Revert "gpio: revert get() to non-errorprogating behaviour"
>
> Mika Westerberg (7):
>       pwm: lpss: Remove ->free() callback
>       pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
>       device property: Take a copy of the property set
>       driver core: platform: Add support for built-in device properties
>       mfd: intel-lpss: Add support for passing device properties
>       mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
>       mfd: intel-lpss: Pass I2C configuration via properties on BXT
>
> Qipeng Zha (1):
>       pinctrl: intel: make the high level interrupt working
>
> Richard Cochran (10):
>       intel_idle: remove useless return from void function.
>       intel_idle: Fix a helper function's return value.
>       intel_idle: Remove redundant initialization calls.
>       intel_idle: Fix deallocation order on the driver exit path.
>       intel_idle: Fix dangling registration on error path.
>       intel_idle: Avoid a double free of the per-CPU data.
>       intel_idle: Setup the timer broadcast only on successful driver load.
>       intel_idle: Don't overreact to a cpuidle registration failure.
>       intel_idle: Propagate hot plug errors.
>       intel_idle: Clean up all registered devices on exit.
>
> Wolfram Sang (1):
>       mmc: make MAN_BKOPS_EN message a debug
>
> qipeng.zha (1):
>       pwm: lpss: Update PWM setting for Broxton
>
>  arch/x86/include/asm/msr-index.h      |   8 +
>  drivers/acpi/gsi.c                    |  21 +-
>  drivers/acpi/property.c               |  10 +-
>  drivers/acpi/resource.c               |  26 ++
>  drivers/base/platform.c               |  25 ++
>  drivers/base/property.c               | 516 +++++++++++++++++++++++++++-------
>  drivers/gpio/gpiolib-acpi.c           |  33 ++-
>  drivers/gpio/gpiolib.c                |  17 +-
>  drivers/gpio/gpiolib.h                |   3 +-
>  drivers/idle/intel_idle.c             | 257 +++++++++++++++--
>  drivers/mfd/intel-lpss-acpi.c         |  31 +-
>  drivers/mfd/intel-lpss-pci.c          |  56 +++-
>  drivers/mfd/intel-lpss.c              |  16 +-
>  drivers/mfd/intel-lpss.h              |   2 +
>  drivers/mfd/mfd-core.c                |   7 +
>  drivers/mmc/core/core.c               |   5 +-
>  drivers/mmc/core/mmc.c                |  39 ++-
>  drivers/mmc/host/sdhci.c              |   7 +-
>  drivers/mmc/host/sdhci.h              |   1 -
>  drivers/pinctrl/intel/pinctrl-intel.c |   5 +-
>  drivers/pwm/pwm-lpss.c                |  57 ++--
>  drivers/pwm/pwm-lpss.h                |   1 +
>  include/linux/acpi.h                  |   1 +
>  include/linux/mfd/core.h              |   5 +
>  include/linux/platform_device.h       |   5 +
>  include/linux/property.h              |  99 ++++++-
>  include/linux/string.h                |   2 +
>  lib/string.c                          |  26 ++
>  28 files changed, 1037 insertions(+), 244 deletions(-)
>



More information about the linux-yocto mailing list