[yocto] meta-sunxi maintained?

Dimitris Tassopoulos dimtass at gmail.com
Tue May 28 03:05:45 PDT 2019


Hi Belisko,

I was thinking about this also, too. The only reason is that in meta-sunxi
they do a great job and they keep their layer clean, which is great I
think. The other layers are just based on the armbian distro, which is a
lot different, but for me it was much easier to integrate their patches,
patching scripts and bootloader scripts to a Yocto layer. That way the only
thing I do is that from time to time I just integrate their new patches and
that's it. There's no development in the layer is just re-use of the
armbian work and a wrapper around it. Therefore, it's hard, even no doable
to put those different architectures together. But definitely that decision
also bothered me a lot before I create the layer and I also don't like time
to be spend on the same thing from different people. Nevertheless, from my
point of view I couldn't find a way to put those things together. I've
tried but I couldn't do it.

Therefore, it was easier for me to do it the way I've done it. And after
all, although it doesn't seem right, at the same time this is the beauty of
the open source. I think the layers are just incompatible in the way that
they are do things. Also it's not bad to have alternatives.

Sunxi is a great community and I believe many of the armbian patches are
coming from there. Others not. Of course, having them all together would be
nice. But I don't think that it's possible because of the different
approach.

I hope this explains your question and even more that explains that was not
a decision to divide things or create more hassle for the same chips.

Regards,
Dimitris

Belisko Marek <marek.belisko at gmail.com> schrieb am Di., 28. Mai 2019, 11:49:

> Hi Dimitris,
>
> On Tue, May 28, 2019 at 11:01 AM Dimitris Tassopoulos <dimtass at gmail.com>
> wrote:
> >
> > Hi Belisko,
> >
> > you can also have a look in to this layer:
> http://layers.openembedded.org/layerindex/branch/master/layer/meta-allwinner-hx/
> > It's for allwinner H2,H3 and H5 boards that already have support on
> Armbian.
> > Pretty much is just a Yocto layer with all the patches and BSP support
> from Armbian.
> > It supports 4.14 and 4.19 mainline kernels only and also the PREEMPT-RT
> patches.
> > Warrior support was added recently, too.
> OK thanks. I think I'll stick with meta-sunxi ;). What about join
> forces and maintains one layer properly instead having it separated?
> >
> > A similar one is also this:
> http://layers.openembedded.org/layerindex/branch/master/layer/meta-nanopi-neo4/
> >
> > Dimitris
> >
> > On Mon, May 27, 2019 at 7:33 PM Belisko Marek <marek.belisko at gmail.com>
> wrote:
> >>
> >> Hi Enrico,
> >>
> >> On Mon, May 27, 2019 at 5:44 PM Enrico <ebutera at users.sourceforge.net>
> wrote:
> >> >
> >> > Hi,
> >> >
> >> > i try to keep it maintained, but now i just have a lime2 for testing
> >> > on real hardware, and i don't have the resources to do test builds for
> >> > all the supported boards.
> >> > Your help would be welcome, i can't check right now if i have the
> >> > rights to add you as co-maintainer, anyway i will add you.
> >> Thanks I have few sunxi based boards so can do tests also on my setup.
> >> Pls ping me when you will add me. Thanks.
> >> >
> >> > Thanks for the help!
> >> >
> >> > Enrico
> >>
> >> Marek
> >> >
> >> > On Mon, May 27, 2019 at 4:50 PM Belisko Marek <
> marek.belisko at gmail.com> wrote:
> >> > >
> >> > > Hello,
> >> > >
> >> > > I'm just curious if meta-sunxi is still maintained? I was
> contributed
> >> > > to layer back while and when look now thud branch is un-compilable
> >> > > (dri2proto not replaced) and warrior branch not created yet. There
> is
> >> > > 14 issues + 6 pending pull requests. Added maintainers also in CC. I
> >> > > think it would be good to have sunxi properly maintained as boards
> >> > > with sunxi processors are popular. I can give a hand as
> co-maintainer
> >> > > if necessary. Thanks a lot.
> >> > >
> >> > > BR,
> >> > >
> >> > > marek
> >> > >
> >> > > --
> >> > > as simple and primitive as possible
> >> > > -------------------------------------------------
> >> > > Marek Belisko - OPEN-NANDRA
> >> > > Freelance Developer
> >> > >
> >> > > Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> >> > > Tel: +421 915 052 184
> >> > > skype: marekwhite
> >> > > twitter: #opennandra
> >> > > web: http://open-nandra.com
> >> --
> >> _______________________________________________
> >> yocto mailing list
> >> yocto at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/yocto
>
>
>
> marek
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190528/d5cd8370/attachment-0001.html>


More information about the yocto mailing list