[yocto] [meta-raspberrypi] RPi 7" Touch Display

[Rudolf J Streif]

Thank you, Paul. I did read Andrei's excellent documentation and enabled 
I2C and SPI etc.

:rjs

On 5/16/19 8:39 AM, Paul Barker wrote:
> On Thu, 16 May 2019, at 16:33, Rudolf J Streif wrote:
>> I am trying to use the "official" RPi 7" touch display
>> (https://www.raspberrypi.org/products/raspberry-pi-touch-display/) with
>> meta-raspberrypi (most recent from master). However, I cannot get it to
>> work. As a matter of fact the display does not even show the GPU rainbow
>> screen making me think that the GPU firmware packaged with
>> meta-raspberrypi does not support the DSI display. It works just fine
>> with the latest Raspbian release (screen and touch).
>>
>> I searched the web up and down but could not find anything. Maybe
>> somebody has an idea? Wrong firmware (maybe cannot be distributed
>> because of licensing...)?
> I'd recommend looking at https://github.com/agherzan/meta-raspberrypi/blob/master/docs/extra-build-config.md to see if there's some extra option you need to enable. If there's nothing documented there then raise an issue on the GitHub repository.
>
> Cheers,
>
-- 
-----
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3396 x700