[yocto] /usr/bin/env requires coreutils?

[Leon Woestenberg]

Hi Emily,

On Wed, Mar 13, 2019 at 12:50 AM Emily S <easmith5555 at gmail.com> wrote:
>
> Ahh okay you meant just literally if there was anything else in it. An additional complication of my setup is that our custom board is in Europe, so right now there's no one to load the OS for me and boot, but I will check as soon as I can.
>
You could check the locally generated filesystem image also, you
typically do not need access to the board to verify this.

Something like tar tvf or "wic ls" - depending on your image type(s)
-- see the Yocto docs for WIC inspection, I don't know from heart.

(But I would travel to Europe Alps and have the trip paid -- much
better than remote board access).

> In regards to your second point, do you mean that the init-clock recipe might be trying to install the script in a slightly incorrect location? For example it's trying to install in /usr/bin/env when my OS is setup to use /bin/env instead?
>
I mean "env" could be installed to /bin/env, whereas the "shebang" in
the header is hard-coded to use /usr/bin/env.
Solution: remove the hard-coding in init-clock.

With this, you should be able to inspect further.

Regards,

Leon.