[yocto] QA notification for completed autobuilder build (yocto-2.8_M1.rc2)

[Jain, Sangeeta]

QA cycle report for 2.8 M1 RC2:

	1. No high milestone defects.  
	2. Test results are available at following location:
 		• For results of all automated tests, please refer to results at public AB [1]
		• For other test results, refer to git repo " yocto-testresults-contrib" [2]
		• For test report for test cases run by Intel and WR team, refer to git repo " yocto-testresults-contrib" [2]
            3. 3 new defects are found in this cycle, BSP HW - parselog issue [3], BSP HW - audio issue [4], qemux86 oe-selftest failure on AB [5] 
            4. ptests failing in this release which were passing in previous release - acl [6]. 3 timeout issues observed in ptests - acl [7], bluez5 [8]  and mdadm [9].
	Richard's comments on ptest failures:  There are three timeouts in ptest, acl, bluez5 (#13366) and mdadm (#13368). These are also not going to block the milestone release. The
                                                                                     bluez5 issue is gcc9 related, mdadm was exposed by wider testing in master. The acl issue needs a bug opening and investigation as that is a regression.
 	Summary of ptest in this build: 
	qemuarm64-ptest:
		Total : 435597
		Pass : 433344
 		 Fail :  65
		Skip : 2188
		Timeout issues in bluez5 and mdadm
            qemux86-64-ptest
            		Total : 45346
            		Pass : 43235
           		 Fail :  56
            		Skip : 2055
            		Timeout issues in acl, bluez5 and mdadm

        5. Summary of ltp test run in this build:
	qemuarm64-ltp
		Total : 1886
		Pass : 1759
 		 Fail :  127
              qemux86-64-ltp
		Total : 1879
                             Pass : 1825
                             Fail :  54

======= Links ========

[1] - https://autobuilder.yocto.io/pub/releases/yocto-2.8_M1.rc2/testresults/

[2] - git clone git at push.yoctoproject.org:yocto-testresults-contrib -b zeus

[3] - [QA 2.8 M1 RC1][BSP HW] parselogs.ParseLogsTest.test_parselogs failure on coffeelake
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13396

[4] - [QA 2.8 M1 RC1][BSP HW] audio is not playing on coffeelake and nuc7
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13397

[5] - [QA 2.8 M1 RC1] test_boot_machine_slirp is showing error for qemux86
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13399

[6] - [QA 2.8 M1 RC1] acl ptest failure
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13395

[7] - acl ptest timeout due to perl update
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13391

[8] - bluez5 ptest hangs with gcc 9
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13366

[9] - mdadm ptest times out
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13368


Thanks & Regards,
Sangeeta Jain