[yocto] Error in building new recipe for Jool network translator
Gokul Raj
gokulraj.kana at gmail.com
Thu Jun 6 20:16:07 PDT 2019
Thanks Mark, I'll check them out.
Regards,
Gokul Raj K
On Fri, 7 Jun, 2019, 2:54 AM Mark Hatle, <mark.hatle at windriver.com> wrote:
> On 6/6/19 11:46 AM, Gokul Raj wrote:
> > Hi Ross,
> >
> > Thanks for the suggestion. I have tried with inheriting
> autotools-brokensep
> > bbclass. Now bitbake got the path for compilation. But, bitbake
> compilation
> > refering to native kernel src path for module compilation. For your
> information
> > this package comes with both kernel module and userspace binary. Single
> makefile
> > helps building both kernel module and userspace binary. Attached log for
> your
> > reference.
> >
> > Any suggestion to compile this package.
>
> You will need to break this into two components. The userspace compile is
> likely what you have mostly working. The kernel module compilation though
> needs
> to be a 'machine specific' recipe, tied to the machine and kernel.
>
> Look at the Yocto Project documentation about building out of tree kernel
> modules.
>
> --Mark
>
> > Regards,
> > Gokul Raj K
> >
> > On Thu, Jun 6, 2019 at 10:01 PM Burton, Ross <ross.burton at intel.com
> > <mailto:ross.burton at intel.com>> wrote:
> >
> > Sounds like the makefiles are broken and can't handle out-of-tree
> > builds. Try replacing inherit autotools with inherit
> > autotools-brokensep (and if that fixes it, file a bug with jool as
> > their build is broken).
> >
> >
> > Ross
> >
> > On Thu, 6 Jun 2019 at 17:27, Gokul Raj <gokulraj.kana at gmail.com
> > <mailto:gokulraj.kana at gmail.com>> wrote:
> > >
> > > Hi All,
> > >
> > > I'm new to yocto and I'm trying to create recipe for Jool network
> > translator package. Tried to compile this package in manually and
> I'm able
> > to compile with following steps.
> > > Manual Steps:
> > >
> > > ./autogen.sh
> > > ./configure
> > > make
> > > make install
> > >
> > > Yocto Receipe:
> > >
> > > DESCRIPTION = "Jool is an Open Source IPv4/IPv6 Translator"
> > > SECTION = "networking"
> > > LICENSE = "GPLv2"
> > > LIC_FILES_CHKSUM =
> "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
> > >
> > > SRCREV = "v4.0.1"
> > > SRC_URI = "git://github.com/NICMx/Jool.git;protocol=http
> > <http://github.com/NICMx/Jool.git;protocol=http>"
> > >
> > > DEPENDS = "libnl iptables"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > inherit autotools module
> > >
> > > Getting following error message /bin/bash: line 20: cd: src/mod:
> No such
> > file or directory But, the src/mod is present in the source
> directory.
> > Help me resolve this issue.
> > >
> > > Yocto Build Error:
> > >
> > > ERROR: jool-4.0.1-r0 do_compile: oe_runmake failed
> > > ERROR: jool-4.0.1-r0 do_compile: Function failed: do_compile (log
> file is
> > located at
> >
> /home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0/temp/log.do_compile.58423)
> > > ERROR: Logfile of failure stored in:
> >
> /home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0/temp/log.do_compile.58423
> > > Log data follows:
> > > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
> 'arm-32',
> > 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
> 'common']
> > > | DEBUG: Executing shell function do_compile
> > > | NOTE: make -j 6
> >
> KERNEL_SRC=/home/graj/poky/build/tmp/work-shared/qemuarm/kernel-source
> >
> KERNEL_PATH=/home/graj/poky/build/tmp/work-shared/qemuarm/kernel-source
> > KERNEL_VERSION=5.0.7-yocto-standard CC=arm-enigma-linux-gnueabi-gcc
> > -mno-thumb-interwork -marm -fuse-ld=bfd
> >
> -fmacro-prefix-map=/home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0=/usr/src/debug/jool/4.0.1-r0
> >
> >
> -fdebug-prefix-map=/home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0=/usr/src/debug/jool/4.0.1-r0
> >
> >
> -fdebug-prefix-map=/home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0/recipe-sysroot=
> >
> >
> -fdebug-prefix-map=/home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0/recipe-sysroot-native=
> >
> -fdebug-prefix-map=/home/graj/poky/build/tmp/work-shared/qemuarm/kernel-source=/usr/src/kernel
> > LD=arm-enigma-linux-gnueabi-ld.bfd AR=arm-enigma-linux-gnueabi-ar
> >
> O=/home/graj/poky/build/tmp/work-shared/qemuarm/kernel-build-artifacts
> > KBUILD_EXTRA_SYMBOLS=
> > > | Making all in src/mod
> > > | /bin/bash: line 20: cd: src/mod: No such file or directory
> > > | Makefile:343: recipe for target 'all-recursive' failed
> > > | make: *** [all-recursive] Error 1
> > > | ERROR: oe_runmake failed
> > > | WARNING: exit code 1 from a shell command.
> > > | ERROR: Function failed: do_compile (log file is located at
> >
> /home/graj/poky/build/tmp/work/qemuarm-enigma-linux-gnueabi/jool/4.0.1-r0/temp/log.do_compile.58423)
> > > ERROR: Task
> > (/home/graj/poky/meta-enigma/recipes-example/jool/jool_4.0.1.bb:
> do_compile)
> > failed with exit code '1'
> > > NOTE: Tasks Summary: Attempted 570 tasks of which 563 didn't need
> to be
> > rerun and 1 failed.
> > >
> > > Summary: 1 task failed:
> > > /home/graj/poky/meta-enigma/recipes-example/jool/jool_4.0.1.bb:
> do_compile
> > > Summary: There were 2 ERROR messages shown, returning a non-zero
> exit code.
> > >
> > > Source git link: https://github.com/NICMx/Jool
> > >
> > > Help me in fixing this issue.
> > >
> > > Regards,
> > > Gokul Raj K
> > >
> > > --
> > > _______________________________________________
> > > yocto mailing list
> > > yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> > > https://lists.yoctoproject.org/listinfo/yocto
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190607/2fd4744d/attachment.html>
More information about the yocto
mailing list