[yocto] Where to add U-Boot argements bootargs and bootcmd?

[Gabriele Zampieri]

Yes, thanks Maciej for pointing that out! It may be a good starting point
for JH.

Gabriele

Il giorno lun 15 lug 2019 alle ore 10:29 Maciej Pijanowski <
maciej.pijanowski at 3mdeb.com> ha scritto:

>
> On 15.07.2019 08:45, Gabriele Zampieri wrote:
>
> Hi,
>
> as far as I know, there is no mechanism to add custom bootargs and/or
> bootcmd to uboot via Yocto (correct me if I'm wrong). I usually patch the
> upstream uboot to achieve this task.
>
> I also haven't heard of any standardized way. It may depend on the target
> hardware
> and the BSP layer you are using. Apart from patching the U-Boot, there
> also might
> be boot.cmd script to modify or the config.txt in case of the RPI, for
> example.
>
>
> Best regards,
> Gabriele
>
> Il giorno lun 8 lug 2019 alle ore 22:43 JH <jupiter.hce at gmail.com> ha
> scritto:
>
>> Hi,
>>
>> Which Yocto files and which statement can I add my own U-Boot bootargs
>> and bootcmd?
>>
>> Thank you.
>>
>> - jupiter
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
> --
> Maciej Pijanowski
> Embedded Systems Engineerhttps://3mdeb.com | @3mdeb_com
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190715/0e7dc33e/attachment.html>