[yocto] Cannot update dhcpcd receipe from v6.11.5 to v7.x.x

[Stefano Cappa]

Fixed. After some tests I'll send the new recipe with a patch to update
dhcpcd.

Il gio 10 gen 2019, 00:12 Stefano Cappa <stefano.cappa.ks89 at gmail.com> ha
scritto:

> Which should be the right path instead of the hardcoded /usr/include?
> Is there a recommended way to fix it in a yocto recipe?
>
>
> Il giorno mer 9 gen 2019 alle ore 03:41 Khem Raj <raj.khem at gmail.com> ha
> scritto:
>
>> On Tue, Jan 8, 2019 at 3:48 PM Stefano Cappa
>> <stefano.cappa.ks89 at gmail.com> wrote:
>> >
>> > Hi!
>> > I'm using Yocto THUD and I'm trying to update dhcpcd
>> (meta-openembedded/meta-networking) from 6.11.5 to 7.0.8 (
>> https://roy.marples.name/downloads/dhcpcd/dhcpcd-7.0.8.tar.xz) only to
>> do some experiments, however I think that it's correct to migrate to the
>> new version.
>> >
>> > I modified the recipe to download version 7.0.8, but when it's building
>> it throws this error:
>> >
>> > ERROR: dhcpcd-7.0.8-r0 do_configure: configure failed
>> > ERROR: dhcpcd-7.0.8-r0 do_configure: Function failed: do_configure (log
>> file is located at
>> /home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/temp/log.do_configure.90966)
>> > ERROR: Logfile of failure stored in:
>> /home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/temp/log.do_configure.90966
>> > Log data follows:
>> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
>> > | DEBUG: Executing shell function autotools_preconfigure
>> > | DEBUG: Shell function autotools_preconfigure finished
>> > | DEBUG: Executing python function autotools_aclocals
>> > | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32',
>> 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
>> > | DEBUG: Python function autotools_aclocals finished
>> > | DEBUG: Executing shell function do_configure
>> > | NOTE: Running ./configure  --build=x86_64-linux
>> --host=arm-poky-linux-gnueabi    --target=arm-poky-linux-gnueabi
>> --prefix=/usr    --exec_prefix=/usr    --bindir=/usr/bin
>> --sbindir=/usr/sbin    --libexecdir=/usr/libexec    --datadir=/usr/share
>> --sysconfdir=/etc    --sharedstatedir=/com    --localstatedir=/var
>> --libdir=/usr/lib    --includedir=/usr/include
>> --oldincludedir=/usr/include    --infodir=/usr/share/info
>> --mandir=/usr/share/man    --disable-silent-rules
>> --disable-dependency-tracking
>> --with-libtool-sysroot=/home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/recipe-sysroot
>> --enable-ipv4 --disable-static  --enable-ipv6 --with-udev
>> > | configure args: --build=x86_64-linux --host=arm-poky-linux-gnueabi
>> --target=arm-poky-linux-gnueabi --prefix=/usr --exec_prefix=/usr
>> --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/libexec
>> --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com
>> --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include
>> --oldincludedir=/usr/include --infodir=/usr/share/info
>> --mandir=/usr/share/man --disable-silent-rules
>> --disable-dependency-tracking
>> --with-libtool-sysroot=/home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/recipe-sysroot
>> --enable-ipv4 --disable-static --enable-ipv6 --with-udev
>> > | ./configure: WARNING: unknown option --exec_prefix
>> > | ./configure: WARNING: unknown option --sharedstatedir
>> > | ./configure: WARNING: unknown option --oldincludedir
>> > | ./configure: WARNING: unknown option --with-libtool-sysroot
>> > | ./configure: WARNING: unknown option --with-udev
>> > | Deriving operating system from ... arm-poky-linux-gnueabi
>> > | Configuring dhcpcd for ... linux
>> > | Enabling INET support
>> > | Enabling ARP support
>> > | Enabling ARPing support
>> > | Enabling IPv4LL support
>> > | Enabling INET6 support
>> > | Enabling DHCPv6 support
>> > | Enabling Authentication
>> > | Using compiler .. arm-poky-linux-gnueabi-gcc  -march=armv7ve -mthumb
>> -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a7
>>  --sysroot=/home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/recipe-sysroot
>> > | arm-poky-linux-gnueabi-gcc  -march=armv7ve -mthumb -mfpu=neon
>> -mfloat-abi=hard -mcpu=cortex-a7
>>  --sysroot=/home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/recipe-sysroot
>> does not create executables
>> > | NOTE: The following config.log files may provide further information.
>> > | NOTE:
>> /home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/dhcpcd-7.0.8/config.log
>> > | ERROR: configure failed
>> > | WARNING: exit code 1 from a shell command.
>> > | ERROR: Function failed: do_configure (log file is located at
>> /home/ks89/git/poky/build/tmp/work/cortexa7t2hf-neon-poky-linux-gnueabi/dhcpcd/7.0.8-r0/temp/log.do_configure.90966)
>> >
>> > Also, the content of "config.log" is :
>> >        cc1: error: include location "/usr/include" is unsafe for
>> cross-compilation [-Werror=poison-system-directories]
>> >        cc1: all warnings being treated as errors
>> >
>> > I compared configure files of versions 6.11.5 and 7.0.8 and they are
>> quite similar with some additions, in particular "-I|--includedir)
>> INCLUDEDIR="$INCLUDEDIR${INCLUDEDIR:+ }-I$var";;".
>> >
>> > In not an expert of autotools and so on, so I don't know how to fix
>> this.
>> > Do you have suggestions?
>>
>> The error suggests that its poking into build host for headers, so you
>> need
>> to look into that usually this means it has hardcoded paths for
>> headers pointing to /usr/include, or it does not respect sysroot
>> option that compiler is passing.
>>
>> >
>> > I added also Khem Raj, but I'm not sure if it's the maintainer of
>> dhcpcd recipe.
>> >
>> > Thank u.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190113/604fec1f/attachment.html>