[yocto] yocto touchscreen
Zoran Stojsavljevic
zoran.stojsavljevic at gmail.com
Tue Feb 5 10:28:20 PST 2019
Hello Nikola,
Let us try to cut to the chase!
After reading what Marc Ferland says/writes, and looking into the following:
https://bugzilla.redhat.com/show_bug.cgi?id=1650634
I have spotted the following:
*Pat Riehecky ** 2018-11-20 14:28:22 UTC *
*the bug remains with the elrepo
kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*
I never had this problem since I do not use Xorg (GFX), rather I only
use serial console from VBox VM from my BBB (pass-through).
Thus, my suggestion for you, to skip the whole mess is to rebuild your
distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*
My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg -
X11).
I am using Fedora 29 on my laptop. Also from the bugzilla:
*Pat Riehecky ** 2018-11-20 15:46:11 UTC *
*Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*
*With this in mind it appears to be an Xorg server bug rather than fbdev.*
>From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,
I have the following:
[ 26.955] Kernel command line: BOOT_IMAGE=/
*vmlinuz-4.20.6-200.fc29.x86_64*
root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap
rhgb
quiet LANG=en_US.UTF-8
[ 26.955] Build Date: 11 January 2019 12:47:38PM
*[ 26.955] Build ID: xorg-x11-se**rver 1.20.3-3.fc29*
[ 26.955] Current version of pixman: 0.34.0
Best Regards,
Zoran
_______
On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic <
zoran.stojsavljevic at gmail.com> wrote:
>
> Hello Nikola,
>
> > I created a kernel recipe with a bbappend file, and, I added
> > the same defconfig that I used for krogoth version.
> > The bbappend for kernel recipe concern meta-ti layer.
> > I didn't edited defconfig file in other layers which contain a
> > kernel recipe.
>
> It could be some problem that Sumo does not take your bbappend file into
the
> consideration as placed.
>
> It could be something else, as well.
>
> I have the same issue with my defconfig file for my Thud Beagle Bone
Black (BBB)
> standard board. Every time I recompile my YOCTO for it for different
releases, I need
> to import my specific defconfig. But I use complete different repos for
my standard
> Beagle Bone Black than YOCTO BBB Poky reference distro.
>
> Here is what I use in Thud (my bblayers.conf):
>
> POKY_BBLAYERS_CONF_VERSION = "2"
> BBPATH = "${TOPDIR}"
> BBFILES ?= ""
>
> BBLAYERS ?= " \
> /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
>
/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking
\
>
/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
>
/home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python
\
> /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
> /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
> /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"
>
> There, I replace defconfig in this layer:
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb
> with my own defconfig.
>
> In the directory:
>
/home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone
>
> If you use only Poky repository, then you need to read the following
paragraph (how to use
> your defconfig with Poky):
>
> [2.3.3. Changing the Configuration] YOCTO Project Linux Development Manual
>
https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
> 2.3.3. Changing the Configuration
>
> I hope this will help. Please, keep us posted!
>
> Zoran
> _______
>
>
> On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <
n.stanisavljevic at polycaptil.fr> wrote:
>>
>> Hy Zoran
>>
>> Thank's to take time to answer
>>
>> I created a kernel recipe with a bbappend file, and, I added the same
defconfig that I used for krogoth version.
>> The bbappend for kernel recipe concern meta-ti layer.
>> I didn't edited defconfig file in other layers which contain a kernel
recipe.
>>
>> I think it's a problem which concern the screen resolution, screen
frequency and adc touchscreen.
>> Something is different between the krogoth and sumo version, but I
didn't find what is changed...
>>
>> Xrandr show that problem is maybe around the screen resolution.
>> It's show the next message : "Size 1024x768 not found in available modes"
>> Maybe it was changed between krogoth and sumo version...but I don't know
where it is indicated if sources files...
>>
>> What do you think ? problem can be around the screen resolution, screen
frequency and adc touchscreen ?
>>
>> Nikola
>>
>> -----Message d'origine-----
>> De : Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>
>> Envoyé : lundi 4 février 2019 17:08
>> À : Stanisavljevic <n.stanisavljevic at polycaptil.fr>
>> Cc : Yocto Project <yocto at yoctoproject.org>
>> Objet : Re: [yocto] yocto touchscreen
>>
>> > I built a first version of this os with version krogoth and it works
fine.
>> >
>> > Now I build a second version of this os with version sumo and the
>> > touch screen works fine during boot process but when kernel is loaded,
>> > touchscreen freeze / lock and impossible to use it.
>>
>> Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?
>>
>> May there are some mismatches in drivers' setup between these two?
>>
>> Zoran
>> _______
>>
>> On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <
n.stanisavljevic at polycaptil.fr> wrote:
>> >
>> > Hy Team,
>> >
>> >
>> >
>> > I have a problem
>> >
>> >
>> >
>> > I buid a custom os for AM335x processor and I used yocto to do it.
>> >
>> >
>> >
>> > I build a first version of this os with version krogoth and it work
fine.
>> >
>> >
>> >
>> > Now I build a second version of this os with version sumo and the
touchscreen work fine during boot process but when kernel is loaded,
touchscreen freeze / lock and impossible to use it.
>> >
>> > The terminal is printed on the touchscreen but the screen is locked,
impossible to write a command or to move the mouse to select, ….
>> >
>> >
>> >
>> > Here is the log of boot to the user session (log got with serial
communication between PC and board) :
>> >
>> >
>> >
>> > U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)
>> >
>> > Trying to boot from MMC1
>> >
>> > reading uboot.env
>> >
>> > reading u-boot.img
>> >
>> > reading u-boot.img
>> >
>> > reading u-boot.img
>> >
>> > reading u-boot.img
>> >
>> >
>> >
>> >
>> >
>> > U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)
>> >
>> >
>> >
>> > CPU : AM335X-GP rev 2.1
>> >
>> > Model: TI AM335x EVM-SK
>> >
>> > DRAM: 256 MiB
>> >
>> > NAND: 0 MiB
>> >
>> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
>> >
>> > reading uboot.env
>> >
>> > ERROR: No USB device found
>> >
>> >
>> >
>> > at drivers/usb/gadget/ether.c:2709/usb_ether_init()
>> >
>> > Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]
>> >
>> >
>> >
>> > Warning: ethernet at 4a100000 using MAC address from ROM
>> >
>> > eth0: ethernet at 4a100000
>> >
>> > Hit any key to stop autoboot: 0
>> >
>> > reading zImage
>> >
>> > 3412752 bytes read in 251 ms (13 MiB/s)
>> >
>> > reading dtb
>> >
>> > 39733 bytes read in 12 ms (3.2 MiB/s)
>> >
>> > ## Flattened Device Tree blob at 82000000
>> >
>> > Booting using the fdt blob at 0x82000000
>> >
>> > Loading Device Tree to 8df19000, end 8df25b34 ... OK
>> >
>> >
>> >
>> > Starting kernel ...
>> >
>> >
>> >
>> > [ 0.000000] Booting Linux on physical CPU 0x0
>> >
>> > [ 0.000000] Initializing cgroup subsys cpu
>> >
>> > [ 0.000000] Initializing cgroup subsys cpuacct
>> >
>> > [ 0.000000] Linux version 4.4.19-ge581bb1cac
(polycaptil at polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT
Thu May 24 11:42:17 CEST 2018
>> >
>> > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387d
>> >
>> > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
>> >
>> > [ 0.000000] Machine model: TI AM335x EVM-SK
>> >
>> > [ 0.000000] cma: Reserved 48 MiB at 0x8a800000
>> >
>> > [ 0.000000] Memory policy: Data cache writeback
>> >
>> > [ 0.000000] CPU: All CPU(s) started in SVC mode.
>> >
>> > [ 0.000000] AM335X ES2.1 (sgx neon )
>> >
>> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 64960
>> >
>> > [ 0.000000] Kernel command line: console=ttyO0,115200
root=/dev/mmcblk0p3 rw
>> >
>> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
>> >
>> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5,
131072 bytes)
>> >
>> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
>> >
>> > [ 0.000000] Memory: 200444K/262144K available (6495K kernel code,
313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K
cma-reserved, 0K highmem)
>> >
>> > [ 0.000000] Virtual kernel memory layout:
>> >
>> > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> >
>> > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>> >
>> > [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
>> >
>> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
>> >
>> > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>> >
>> > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>> >
>> > [ 0.000000] .text : 0xc0008000 - 0xc08b0034 (8865 kB)
>> >
>> > [ 0.000000] .init : 0xc08b1000 - 0xc08f2000 ( 260 kB)
>> >
>> > [ 0.000000] .data : 0xc08f2000 - 0xc09407f0 ( 314 kB)
>> >
>> > [ 0.000000] .bss : 0xc09407f0 - 0xc0982d58 ( 266 kB)
>> >
>> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
>> >
>> > [ 0.000000] Preemptible hierarchical RCU implementation.
>> >
>> > [ 0.000000] Build-time adjustment of leaf fanout to 32.
>> >
>> > [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>> >
>> > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with
128 interrupts
>> >
>> > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
>> >
>> > [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
>> >
>> > [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
>> >
>> > [ 0.000047] OMAP clocksource: timer1 at 24000000 Hz
>> >
>> > [ 0.000222] clocksource_probe: no matching clocksources found
>> >
>> > [ 0.000415] Console: colour dummy device 80x30
>> >
>> > [ 0.000442] WARNING: Your 'console=ttyO0' has been replaced by
'ttyS0'
>> >
>> > [ 0.000448] This ensures that you still see kernel messages. Please
>> >
>> > [ 0.000454] update your kernel commandline.
>> >
>> > [ 0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
>> >
>> > [ 0.089064] pid_max: default: 32768 minimum: 301
>> >
>> > [ 0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096
bytes)
>> >
>> > [ 0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,
4096 bytes)
>> >
>> > [ 0.089932] Initializing cgroup subsys io
>> >
>> > [ 0.089964] Initializing cgroup subsys memory
>> >
>> > [ 0.090005] Initializing cgroup subsys devices
>> >
>> > [ 0.090021] Initializing cgroup subsys freezer
>> >
>> > [ 0.090036] Initializing cgroup subsys perf_event
>> >
>> > [ 0.090048] Initializing cgroup subsys pids
>> >
>> > [ 0.090078] CPU: Testing write buffer coherency: ok
>> >
>> > [ 0.090499] Setting up static identity map for 0x80008200 -
0x80008258
>> >
>> > [ 0.092680] devtmpfs: initialized
>> >
>> > [ 0.105440] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
>> >
>> > [ 0.120529] omap_hwmod: debugss: _wait_target_disable failed
>> >
>> > [ 0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
>> >
>> > [ 0.179852] pinctrl core: initialized pinctrl subsystem
>> >
>> > [ 0.181216] NET: Registered protocol family 16
>> >
>> > [ 0.183420] DMA: preallocated 256 KiB pool for atomic coherent
allocations
>> >
>> > [ 0.209061] cpuidle: using governor ladder
>> >
>> > [ 0.239048] cpuidle: using governor menu
>> >
>> > [ 0.243661] OMAP GPIO hardware version 0.1
>> >
>> > [ 0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
>> >
>> > [ 0.297629] edma 49000000.edma: TI EDMA DMA engine driver
>> >
>> > [ 0.298606] reg-fixed-voltage fixedregulator at 2: could not find
pctldev for node
/ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_wl12xx_gpio,
deferring probe
>> >
>> > [ 0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_i2c0_pins, deferring
probe
>> >
>> > [ 0.302525] media: Linux media interface: v0.10
>> >
>> > [ 0.302588] Linux video capture interface: v2.00
>> >
>> > [ 0.302638] pps_core: LinuxPPS API ver. 1 registered
>> >
>> > [ 0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti at linux.it>
>> >
>> > [ 0.302676] PTP clock support registered
>> >
>> > [ 0.302741] EDAC MC: Ver: 3.0.0
>> >
>> > [ 0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
>> >
>> > [ 0.304332] Advanced Linux Sound Architecture Driver Initialized.
>> >
>> > [ 0.305512] clocksource: Switched to clocksource timer1
>> >
>> > [ 0.316775] NET: Registered protocol family 2
>> >
>> > [ 0.317599] TCP established hash table entries: 2048 (order: 1,
8192 bytes)
>> >
>> > [ 0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
>> >
>> > [ 0.317663] TCP: Hash tables configured (established 2048 bind 2048)
>> >
>> > [ 0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
>> >
>> > [ 0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>> >
>> > [ 0.317925] NET: Registered protocol family 1
>> >
>> > [ 0.318352] RPC: Registered named UNIX socket transport module.
>> >
>> > [ 0.318366] RPC: Registered udp transport module.
>> >
>> > [ 0.318372] RPC: Registered tcp transport module.
>> >
>> > [ 0.318379] RPC: Registered tcp NFSv4.1 backchannel transport
module.
>> >
>> > [ 0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU driver,
5 counters available
>> >
>> > [ 0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
>> >
>> > [ 0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>> >
>> > [ 0.330717] NFS: Registering the id_resolver key type
>> >
>> > [ 0.330798] Key type id_resolver registered
>> >
>> > [ 0.330807] Key type id_legacy registered
>> >
>> > [ 0.330886] ntfs: driver 2.1.32 [Flags: R/O].
>> >
>> > [ 0.334673] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 248)
>> >
>> > [ 0.334706] io scheduler noop registered
>> >
>> > [ 0.334719] io scheduler deadline registered
>> >
>> > [ 0.334877] io scheduler cfq registered (default)
>> >
>> > [ 0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800
size 568
>> >
>> > [ 0.339415] backlight supply power not found, using dummy regulator
>> >
>> > [ 0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing
disabled
>> >
>> > [ 0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
>> >
>> > [ 1.017357] console [ttyS0] enabled
>> >
>> > [ 1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,
base_baud = 3000000) is a 8250
>> >
>> > [ 1.032273] [drm] Initialized drm 1.1.0 20060810
>> >
>> > [ 1.039564] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
>> >
>> > [ 1.046349] [drm] No driver support for vblank timestamp query.
>> >
>> > [ 1.062121] Console: switching to colour frame buffer device 60x34
>> >
>> > [ 1.070360] tilcdc 4830e000.lcdc: fb0: frame buffer device
>> >
>> > [ 1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
>> >
>> > [ 1.118644] loop: module loaded
>> >
>> > [ 1.124253] libphy: Fixed MDIO Bus: probed
>> >
>> > [ 1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
>> >
>> > [ 1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
>> >
>> > [ 1.198786] libphy: 4a101000.mdio: probed
>> >
>> > [ 1.202886] davinci_mdio 4a101000.mdio: phy[0]: device
4a101000.mdio:00, driver SMSC LAN8710/LAN8720
>> >
>> > [ 1.212890] cpsw 4a100000.ethernet: Detected MACID =
a0:f6:fd:4c:a6:ba
>> >
>> > [ 1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =
c4:ed:ba:88:2a:92
>> >
>> > [ 1.229382] mousedev: PS/2 mouse device common for all mice
>> >
>> > [ 1.235845] i2c /dev entries driver
>> >
>> > [ 1.240508] cpuidle: enable-method property 'ti,am3352' found
operations
>> >
>> > [ 1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
>> >
>> > [ 1.275713] pinctrl-single 44e10800.pinmux: bad data for mux
pinmux_mmc2_pins
>> >
>> > [ 1.282895] pinctrl-single 44e10800.pinmux: no pins entries for
pinmux_mmc2_pins
>> >
>> > [ 1.317159] ledtrig-cpu: registered to indicate activity on CPUs
>> >
>> > [ 1.326069] NET: Registered protocol family 10
>> >
>> > [ 1.332092] sit: IPv6 over IPv4 tunneling driver
>> >
>> > [ 1.337715] NET: Registered protocol family 17
>> >
>> > [ 1.342510] Key type dns_resolver registered
>> >
>> > [ 1.347095] omap_voltage_late_init: Voltage driver support not added
>> >
>> > [ 1.407145] tps65910-rtc tps65910-rtc: rtc core: registered
tps65910-rtc as rtc0
>> >
>> > [ 1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
>> >
>> > [ 1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
>> >
>> > [ 1.426813] vmmc: supplied by vbat
>> >
>> > [ 1.466341] pinctrl-single 44e10800.pinmux: bad data for mux
pinmux_mmc2_pins
>> >
>> > [ 1.474737] pinctrl-single 44e10800.pinmux: no pins entries for
pinmux_mmc2_pins
>> >
>> > [ 1.513247] mmc0: host does not support reading read-only switch,
assuming write-enable
>> >
>> > [ 1.523414] mmc0: new high speed SDHC card at address 0001
>> >
>> > [ 1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
>> >
>> > [ 1.535996] mmcblk0: p1 p2 p3
>> >
>> > [ 1.595932] vdd_mpu: supplied by vbat
>> >
>> > [ 1.602167] input: gpio_buttons at 0 as
/devices/platform/gpio_buttons at 0/input/input0
>> >
>> > [ 1.618291] tps65910-rtc tps65910-rtc: setting system clock to
2019-02-01 20:07:49 UTC (1549051669)
>> >
>> > [ 1.639394] lis3_reg: disabling
>> >
>> > [ 1.655732] ALSA device list:
>> >
>> > [ 1.658720] No soundcards found.
>> >
>> > [ 1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to
feature incompatibilities
>> >
>> > [ 1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to
feature incompatibilities
>> >
>> > [ 2.183999] EXT4-fs (mmcblk0p3): recovery complete
>> >
>> > [ 2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered
data mode. Opts: (null)
>> >
>> > [ 2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
>> >
>> > [ 2.225670] devtmpfs: mounted
>> >
>> > [ 2.235781] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
>> >
>> > [ 2.242162] This architecture does not have kernel memory
protection.
>> >
>> > INIT: version 2.88 booting
>> >
>> > Starting udev
>> >
>> > [ 3.090091] udevd[78]: starting version 3.2.5
>> >
>> > [ 3.106175] random: udevd: uninitialized urandom read (16 bytes
read, 26 bits of entropy available)
>> >
>> > [ 3.118667] random: udevd: uninitialized urandom read (16 bytes
read, 26 bits of entropy available)
>> >
>> > [ 3.128014] random: udevd: uninitialized urandom read (16 bytes
read, 26 bits of entropy available)
>> >
>> > [ 3.137335] random: udevd: uninitialized urandom read (16 bytes
read, 26 bits of entropy available)
>> >
>> > [ 3.218433] udevd[79]: starting eudev-3.2.5
>> >
>> > [ 3.325886] random: udevd: uninitialized urandom read (16 bytes
read, 29 bits of entropy available)
>> >
>> > [ 3.346155] random: udevd: uninitialized urandom read (16 bytes
read, 29 bits of entropy available)
>> >
>> > [ 4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
>> >
>> > [ 5.548283] random: dd: uninitialized urandom read (512 bytes read,
43 bits of entropy available)
>> >
>> > INIT: Entering runlevel: 5
>> >
>> > Configuring network interfaces... [ 5.820546] net eth0:
initializing cpsw version 1.12 (0)
>> >
>> > [ 5.825987] net eth0: initialized cpsw ale version 1.4
>> >
>> > [ 5.831150] net eth0: ALE Table size 1024
>> >
>> > [ 5.838581] net eth0: phy found : id is : 0x7c0f1
>> >
>> > [ 5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> >
>> > [ 9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full
- flow control rx/tx
>> >
>> > [ 9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> >
>> > chown: unrecognized option '--reference=/etc/resolv.conf'
>> >
>> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.
>> >
>> >
>> >
>> > Usage: chown [-Rh]... USER[:[GRP]] FILE...
>> >
>> > chmod: unrecognized option '--reference=/etc/resolv.conf'
>> >
>> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.
>> >
>> >
>> >
>> > Usage: chmod [-R] MODE[,MODE]... FILE...
>> >
>> > done.
>> >
>> > Starting system message bus: [ 14.887099] random: dbus-daemon:
uninitialized urandom read (12 bytes read, 62 bits of entropy available)
>> >
>> > [ 14.912318] random: dbus-daemon: uninitialized urandom read (12
bytes read, 62 bits of entropy available)
>> >
>> > dbus.
>> >
>> > Starting OpenBSD Secure Shell server: sshd
>> >
>> > [ 15.393971] random: sshd: uninitialized urandom read (32 bytes
read, 65 bits of entropy available)
>> >
>> > done.
>> >
>> > Starting Xserver
>> >
>> > Starting DHCP server:
>> >
>> > .
>> >
>> > starting DNS forwarder and DHCP server: dnsmasq...
>> >
>> > X.Org X Server 1.19.6
>> >
>> > Release Date: 2017-12-20
>> >
>> > X Protocol Version 11, Revision 0
>> >
>> > Build Operating System: Linux 4.15.0-38-generic x86_64
>> >
>> > Current Operating System: Linux polycaptil-machine-am335x-evmsk
>> > 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
>> >
>> > Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
>> >
>> > Build Date: 05 November 2018 09:33:21PM
>> >
>> >
>> >
>> > Current version of pixman: 0.34.0
>> >
>> > Before reporting problems, check http://wiki.x.org
>> >
>> > to make sure that you have the latest version.
>> >
>> > Markers: (--) probed, (**) from config file, (==) default setting,
>> >
>> > (++) from command line, (!!) notice, (II) informational,
>> >
>> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> >
>> > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019
>> >
>> > (==) Using config file: "/etc/X11/xorg.conf"
>> >
>> > (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>> >
>> > done.
>> >
>> > Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
>> >
>> > nl80211: 'nl80211' generic netlink not found
>> >
>> > Failed to initialize driver 'nl80211'
>> >
>> > wlan0: interface state UNINITIALIZED->DISABLED
>> >
>> > wlan0: AP-DISABLED
>> >
>> > hostapd_free_hapd_data: Interface wlan0 wasn't started
>> >
>> > Starting ntpd: done
>> >
>> > Starting syslogd/klogd: done
>> >
>> > Starting crond: OK
>> >
>> >
>> >
>> > Poky (Yocto Project Reference Distro) 2.5
>> > polycaptil-machine-am335x-evmsk /dev/ttyS0
>> >
>> >
>> >
>> > polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon
>> > address is:
>> > unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7
>> > 25
>> >
>> > Size 1024x768 not found in available modes
>> >
>> > Error: No calibratable devices found.
>> >
>> > matchbox: Cant find a keycode for keysym 269025056
>> >
>> > matchbox: ignoring key shortcut XF86Calendar=!$contacts
>> >
>> >
>> >
>> > matchbox: Cant find a keycode for keysym 2809
>> >
>> > matchbox: ignoring key shortcut telephone=!$dates
>> >
>> >
>> >
>> > matchbox: Cant find a keycode for keysym 269025050
>> >
>> > matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
>> >
>> >
>> >
>> > dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry'
>> > requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")
>> >
>> > dbus-daemon[358]: Successfully activated service
'org.a11y.atspi.Registry'
>> >
>> > SpiRegistry daemon is running with well-known name -
>> > org.a11y.atspi.Registry
>> >
>> > [ 30.662697] random: nonblocking pool is initialized
>> >
>> >
>> >
>> > Poky (Yocto Project Reference Distro) 2.5
>> > polycaptil-machine-am335x-evmsk /dev/ttyS0
>> >
>> >
>> >
>> > Thank’s to take time to read my message.
>> >
>> > N.Stanisavljevic
>> >
>> > --
>> > _______________________________________________
>> > yocto mailing list
>> > yocto at yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/yocto
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190205/2e965ff4/attachment-0001.html>
More information about the yocto
mailing list