[yocto] yocto touchscreen
Zoran Stojsavljevic
zoran.stojsavljevic at gmail.com
Sun Apr 7 23:07:24 PDT 2019
Hello Nikola,
I did some quick analysis of your kernel boot traces, and there are the
following observations made:
[1] The kernel used is:
Linux version 4.4.19-ge581bb1cac (polycaptil at polycaptil-HP-Notebook) ?!
In my case (I built YOCTO thud for BBB NOT using X11, only serial console):
Linux version 4.19.7-jumpnow (oe-user at oe-host) (gcc version 8.2.0 (GCC))
I could not explain polycaptil at polycaptil-HP-Notebook, maybe you do it for
such kind of platform...
The kernel used is too old, for my taste, you did not replaced it, if you
built YOCTO thud!
[2] The kernel command line:
[ 0.000000] Kernel command line: console=ttyO0,115200
root=/dev/mmcblk0p2 rw
Shows that you use EMMC as holder for / tree, all good.
[3] The concern about your console: console=ttyO0,115200
Is addressed here:
[ 0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
Later followed by:
[ 0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[ 1.017361] console [ttyS0] enabled
[ 1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,
base_baud = 3000000) is a 8250
So, not at all worries about the console!
[4] The following traces are worrying me very much:
Starting Xserver
Starting syslogd/klogd:
done
*X.Org X Server 1.20.1*
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-45-generic x86_64
*Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac* #1 PREEMPT
Thu May 24 11:42:17 CEST 2018 armv7l
Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
Build Date: 02 April 2019 07:35:10PM
As Marc wrote earlier:
> Looks like: https://bugzilla.redhat.com/show_bug.cgi?id=1650634
So, as I stated before: you should have in your build:
*X.Org Server 1.20.3! This is the main problem, seems!*
Zoran
_______
On Fri, Apr 5, 2019 at 3:35 PM Stanisavljevic <
n.stanisavljevic at polycaptil.fr> wrote:
> Hello Zoran,
>
>
>
> I keep you in touch about the migration from sumo to thud to solve my
> problem of locked touchscreen.
>
>
>
> I migrated from sumo to thud version, but nothing changed, the problem is
> the same, and I have same messages on boot as sumo version.
>
>
>
> I looked that the x server have a configuration kernel command line (if I
> correctly understood), here is what is written :
>
> Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
>
>
>
> But the kernel command line of poky is different, here is what is
> configured for poky kernel command line :
>
> Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0
>
>
>
> For the xserver it is ttyO0 and for poky it is ttyS0, maybe there is
> something wrong here which do problem for the touchscreen.
>
>
>
> I put below (at end of this mail )the text which appear during the boot.
>
>
>
> I think xorg-x11-server package 1.20.3 was not the problem in the
> previous yocto version (sumo)…
>
>
>
> Best regards
>
> Nikola
>
>
>
> Here is the text that appear during the boot :
>
>
>
> root at am335x-evm:~# CCCCCCCCCCCCCCCCCCCCCCCC
>
> U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)
>
> Trying to boot from MMC1
>
> reading uboot.env
>
> reading u-boot.img
>
> reading u-boot.img
>
> reading u-boot.img
>
> reading u-boot.img
>
>
>
>
>
> U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)
>
>
>
> CPU : AM335X-GP rev 2.1
>
> Model: TI AM335x EVM-SK
>
> DRAM: 256 MiB
>
> NAND: 0 MiB
>
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
>
> reading uboot.env
>
> ERROR: No USB device found
>
>
>
> at drivers/usb/gadget/ether.c:2709/usb_ether_init()
>
> Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]
>
>
>
> Warning: ethernet at 4a100000 using MAC address from ROM
>
> eth0: ethernet at 4a100000
>
> Hit any key to stop autoboot: 0
>
> reading zImage
>
> 3412752 bytes read in 252 ms (12.9 MiB/s)
>
> reading dtb
>
> 39733 bytes read in 12 ms (3.2 MiB/s)
>
> ## Flattened Device Tree blob at 82000000
>
> Booting using the fdt blob at 0x82000000
>
> Loading Device Tree to 8df19000, end 8df25b34 ... OK
>
>
>
> Starting kernel ...
>
>
>
> [ 0.000000] Booting Linux on physical CPU 0x0
>
> [ 0.000000] Initializing cgroup subsys cpu
>
> [ 0.000000] Initializing cgroup subsys cpuacct
>
> [ 0.000000] Linux version 4.4.19-ge581bb1cac
> (polycaptil at polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT
> Thu May 24 11:42:17 CEST 2018
>
> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
> cr=10c5387d
>
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
>
> [ 0.000000] Machine model: TI AM335x EVM-SK
>
> [ 0.000000] cma: Reserved 48 MiB at 0x8a800000
>
> [ 0.000000] Memory policy: Data cache writeback
>
> [ 0.000000] CPU: All CPU(s) started in SVC mode.
>
> [ 0.000000] AM335X ES2.1 (sgx neon )
>
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 64960
>
> [ 0.000000] Kernel command line: console=ttyO0,115200
> root=/dev/mmcblk0p2 rw
>
> [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
>
> [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> bytes)
>
> [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> bytes)
>
> [ 0.000000] Memory: 200444K/262144K available (6495K kernel code, 313K
> rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K
> cma-reserved, 0K highmem)
>
> [ 0.000000] Virtual kernel memory layout:
>
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>
> [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
>
> [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
>
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>
> [ 0.000000] .text : 0xc0008000 - 0xc08b0034 (8865 kB)
>
> [ 0.000000] .init : 0xc08b1000 - 0xc08f2000 ( 260 kB)
>
> [ 0.000000] .data : 0xc08f2000 - 0xc09407f0 ( 314 kB)
>
> [ 0.000000] .bss : 0xc09407f0 - 0xc0982d58 ( 266 kB)
>
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>
> [ 0.000000] Preemptible hierarchical RCU implementation.
>
> [ 0.000000] Build-time adjustment of leaf fanout to 32.
>
> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>
> [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
> interrupts
>
> [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
>
> [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
> 89478484971ns
>
> [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635851949 ns
>
> [ 0.000047] OMAP clocksource: timer1 at 24000000 Hz
>
> [ 0.000222] clocksource_probe: no matching clocksources found
>
> [ 0.000415] Console: colour dummy device 80x30
>
> [ 0.000441] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
>
> [ 0.000447] This ensures that you still see kernel messages. Please
>
> [ 0.000453] update your kernel commandline.
>
> [ 0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
>
> [ 0.089067] pid_max: default: 32768 minimum: 301
>
> [ 0.089198] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>
> [ 0.089210] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes)
>
> [ 0.089932] Initializing cgroup subsys io
>
> [ 0.089965] Initializing cgroup subsys memory
>
> [ 0.090003] Initializing cgroup subsys devices
>
> [ 0.090020] Initializing cgroup subsys freezer
>
> [ 0.090035] Initializing cgroup subsys perf_event
>
> [ 0.090047] Initializing cgroup subsys pids
>
> [ 0.090074] CPU: Testing write buffer coherency: ok
>
> [ 0.090499] Setting up static identity map for 0x80008200 - 0x80008258
>
> [ 0.092669] devtmpfs: initialized
>
> [ 0.105440] VFP support v0.3: implementor 41 architecture 3 part 30
> variant c rev 3
>
> [ 0.120496] omap_hwmod: debugss: _wait_target_disable failed
>
> [ 0.175552] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
>
> [ 0.179889] pinctrl core: initialized pinctrl subsystem
>
> [ 0.181246] NET: Registered protocol family 16
>
> [ 0.183446] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
>
> [ 0.209067] cpuidle: using governor ladder
>
> [ 0.239055] cpuidle: using governor menu
>
> [ 0.243662] OMAP GPIO hardware version 0.1
>
> [ 0.254349] hw-breakpoint: debug architecture 0x4 unsupported.
>
> [ 0.297650] edma 49000000.edma: TI EDMA DMA engine driver
>
> [ 0.298630] reg-fixed-voltage fixedregulator at 2: could not find pctldev
> for node /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_wl12xx_gpio,
> deferring probe
>
> [ 0.302384] omap_i2c 44e0b000.i2c: could not find pctldev for node
> /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_i2c0_pins, deferring
> probe
>
> [ 0.302543] media: Linux media interface: v0.10
>
> [ 0.302609] Linux video capture interface: v2.00
>
> [ 0.302660] pps_core: LinuxPPS API ver. 1 registered
>
> [ 0.302668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <giometti at linux.it>
>
> [ 0.302699] PTP clock support registered
>
> [ 0.302764] EDAC MC: Ver: 3.0.0
>
> [ 0.303981] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
>
> [ 0.304343] Advanced Linux Sound Architecture Driver Initialized.
>
> [ 0.305508] clocksource: Switched to clocksource timer1
>
> [ 0.316757] NET: Registered protocol family 2
>
> [ 0.317569] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
>
> [ 0.317608] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
>
> [ 0.317636] TCP: Hash tables configured (established 2048 bind 2048)
>
> [ 0.317718] UDP hash table entries: 256 (order: 0, 4096 bytes)
>
> [ 0.317738] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>
> [ 0.317898] NET: Registered protocol family 1
>
> [ 0.318323] RPC: Registered named UNIX socket transport module.
>
> [ 0.318337] RPC: Registered udp transport module.
>
> [ 0.318344] RPC: Registered tcp transport module.
>
> [ 0.318350] RPC: Registered tcp NFSv4.1 backchannel transport module.
>
> [ 0.319303] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
> counters available
>
> [ 0.321370] futex hash table entries: 256 (order: -1, 3072 bytes)
>
> [ 0.329774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>
> [ 0.330714] NFS: Registering the id_resolver key type
>
> [ 0.330792] Key type id_resolver registered
>
> [ 0.330801] Key type id_legacy registered
>
> [ 0.330881] ntfs: driver 2.1.32 [Flags: R/O].
>
> [ 0.334651] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 248)
>
> [ 0.334684] io scheduler noop registered
>
> [ 0.334698] io scheduler deadline registered
>
> [ 0.334855] io scheduler cfq registered (default)
>
> [ 0.336527] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800
> size 568
>
> [ 0.339377] backlight supply power not found, using dummy regulator
>
> [ 0.402495] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
>
> [ 0.406968] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
> base_baud = 3000000) is a 8250
>
> [ 1.017361] console [ttyS0] enabled
>
> [ 1.022188] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,
> base_baud = 3000000) is a 8250
>
> [ 1.032233] [drm] Initialized drm 1.1.0 20060810
>
> [ 1.039551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>
> [ 1.046337] [drm] No driver support for vblank timestamp query.
>
> [ 1.062083] Console: switching to colour frame buffer device 60x34
>
> [ 1.070316] tilcdc 4830e000.lcdc: fb0: frame buffer device
>
> [ 1.105532] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
>
> [ 1.118602] loop: module loaded
>
> [ 1.124221] libphy: Fixed MDIO Bus: probed
>
> [ 1.185547] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
>
> [ 1.191690] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
>
> [ 1.198754] libphy: 4a101000.mdio: probed
>
> [ 1.202851] davinci_mdio 4a101000.mdio: phy[0]: device
> 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
>
> [ 1.212830] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:4c:a6:ba
>
> [ 1.220461] cpsw 4a100000.ethernet: cpsw: Detected MACID =
> c4:ed:ba:88:2a:92
>
> [ 1.229313] mousedev: PS/2 mouse device common for all mice
>
> [ 1.235792] i2c /dev entries driver
>
> [ 1.240448] cpuidle: enable-method property 'ti,am3352' found operations
>
> [ 1.248143] omap_hsmmc 48060000.mmc: Got CD GPIO
>
> [ 1.275713] pinctrl-single 44e10800.pinmux: bad data for mux
> pinmux_mmc2_pins
>
> [ 1.282895] pinctrl-single 44e10800.pinmux: no pins entries for
> pinmux_mmc2_pins
>
> [ 1.317167] ledtrig-cpu: registered to indicate activity on CPUs
>
> [ 1.326065] NET: Registered protocol family 10
>
> [ 1.332086] sit: IPv6 over IPv4 tunneling driver
>
> [ 1.337713] NET: Registered protocol family 17
>
> [ 1.342528] Key type dns_resolver registered
>
> [ 1.347114] omap_voltage_late_init: Voltage driver support not added
>
> [ 1.407191] tps65910-rtc tps65910-rtc: rtc core: registered
> tps65910-rtc as rtc0
>
> [ 1.415327] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
>
> [ 1.421710] omap_hsmmc 48060000.mmc: Got CD GPIO
>
> [ 1.426857] vmmc: supplied by vbat
>
> [ 1.466348] pinctrl-single 44e10800.pinmux: bad data for mux
> pinmux_mmc2_pins
>
> [ 1.474748] pinctrl-single 44e10800.pinmux: no pins entries for
> pinmux_mmc2_pins
>
> [ 1.513242] mmc0: host does not support reading read-only switch,
> assuming write-enable
>
> [ 1.523406] mmc0: new high speed SDHC card at address 0001
>
> [ 1.529619] mmcblk0: mmc0:0001 AS 3.72 GiB
>
> [ 1.535970] mmcblk0: p1 p2 p3
>
> [ 1.595927] vdd_mpu: supplied by vbat
>
> [ 1.602118] input: gpio_buttons at 0 as /devices/platform/gpio_buttons at 0
> /input/input0
>
> [ 1.618310] tps65910-rtc tps65910-rtc: setting system clock to
> 2019-04-03 08:25:12 UTC (1554279912)
>
> [ 1.639397] lis3_reg: disabling
>
> [ 1.655734] ALSA device list:
>
> [ 1.658723] No soundcards found.
>
> [ 1.678283] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature
> incompatibilities
>
> [ 1.696903] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature
> incompatibilities
>
> [ 1.792693] EXT4-fs (mmcblk0p2): recovery complete
>
> [ 1.807446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
> mode. Opts: (null)
>
> [ 1.821463] VFS: Mounted root (ext4 filesystem) on device 179:2.
>
> [ 1.835669] devtmpfs: mounted
>
> [ 1.839073] Freeing unused kernel memory: 260K (c08b1000 - c08f2000)
>
> [ 1.851956] This architecture does not have kernel memory protection.
>
> INIT: version 2.88 booting
>
> Starting udev
>
> [ 2.513624] udevd[78]: starting version 3.2.5
>
> [ 2.527632] random: udevd: uninitialized urandom read (16 bytes read,
> 18 bits of entropy available)
>
> [ 2.546992] random: udevd: uninitialized urandom read (16 bytes read,
> 18 bits of entropy available)
>
> [ 2.566829] random: udevd: uninitialized urandom read (16 bytes read,
> 18 bits of entropy available)
>
> [ 2.585755] random: udevd: uninitialized urandom read (16 bytes read,
> 18 bits of entropy available)
>
> [ 2.668211] udevd[79]: starting eudev-3.2.5
>
> [ 3.036159] random: udevd: uninitialized urandom read (16 bytes read,
> 21 bits of entropy available)
>
> [ 3.061761] random: udevd: uninitialized urandom read (16 bytes read,
> 21 bits of entropy available)
>
> [ 4.494682] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
>
> [ 5.052098] random: dd: uninitialized urandom read (512 bytes read, 34
> bits of entropy available)
>
> INIT: Entering runlevel: 5
>
> Configuring network interfaces... [ 5.254308] net eth0: initializing
> cpsw version 1.12 (0)
>
> [ 5.259812] net eth0: initialized cpsw ale version 1.4
>
> [ 5.264976] net eth0: ALE Table size 1024
>
> [ 5.272411] net eth0: phy found : id is : 0x7c0f1
>
> [ 5.285702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>
> udhcpc: started, v1.29.2
>
> udhcpc: sending discover
>
> udhcpc: sending discover
>
> udhcpc: sending discover
>
> udhcpc: no lease, forking to background
>
> done.
>
> Starting system message bus: [ 14.793334] random: dbus-daemon:
> uninitialized urandom read (12 bytes read, 51 bits of entropy available)
>
> [ 14.831748] random: dbus-daemon: uninitialized urandom read (12 bytes
> read, 52 bits of entropy available)
>
> dbus.
>
> Starting Xserver
>
> Starting syslogd/klogd:
>
> done
>
>
>
> X.Org X Server 1.20.1
>
> X Protocol Version 11, Revision 0
>
> Build Operating System: Linux 4.15.0-45-generic x86_64
>
> Current Operating System: Linux am335x-evm 4.4.19-ge581bb1cac #1 PREEMPT
> Thu May 24 11:42:17 CEST 2018 armv7l
>
> Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p2 rw
>
> Build Date: 02 April 2019 07:35:10PM
>
>
>
> Current version of pixman: 0.34.0
>
> Before reporting problems, check http://wiki.x.org
>
> to make sure that you have the latest version.
>
> Markers: (--) probed, (**) from config file, (==) default setting,
>
> (++) from command line, (!!) notice, (II) informational,
>
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 3 08:25:25 2019
>
> (==) Using config file: "/etc/X11/xorg.conf"
>
> (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>
>
>
> Poky (Yocto Project Reference Distro) 2.6.1 am335x-evm /dev/ttyS0
>
>
>
> am335x-evm login: The XKEYBOARD keymap compiler (xkbcomp) reports:
>
> > Warning: Unsupported high keycode 372 for name <I372> ignored
>
> > X11 cannot support keycodes above 255.
>
> > This warning only shows for the first high keycode.
>
> Errors from xkbcomp are not fatal to the X server
>
> [ 15.888959] random: dbus-daemon: uninitialized urandom read (12 bytes
> read, 65 bits of entropy available)
>
> D-BUS per-session daemon address is:
> unix:abstract=/tmp/dbus-JjEW6Wgjtx,guid=87af020e5c6f1a7e21d449e55ca46df5
>
> Size 1024x768 not found in available modes
>
> Error: No calibratable devices found.
>
> matchbox: Cant find a keycode for keysym 269025056
>
> matchbox: ignoring key shortcut XF86Calendar=!$contacts
>
>
>
> matchbox: Cant find a keycode for keysym 2809
>
> matchbox: ignoring key shortcut telephone=!$dates
>
>
>
> matchbox: Cant find a keycode for keysym 269025050
>
> matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
>
>
>
> Failed to launch bus: Failed to execute child process ?/usr/bin?
> (Permission denied)
>
> (matchbox-terminal:274): dbind-WARNING **: 08:25:27.404: Error retrieving
> accessibility bus address: org.a11y.Bus.Error: Failed to execute child
> process ?/usr/bin? (Permission denied)
>
> [ 43.718127] random: nonblocking pool is initialized
>
>
>
>
>
>
>
>
>
>
>
> *De :* Stanisavljevic <n.stanisavljevic at polycaptil.fr>
> *Envoyé :* lundi 18 février 2019 15:27
> *À :* 'Zoran Stojsavljevic' <zoran.stojsavljevic at gmail.com>
> *Cc :* 'Yocto Project' <yocto at yoctoproject.org>; 'Marc Ferland' <
> marc.ferland at gmail.com>
> *Objet :* RE: [yocto] yocto touchscreen
>
>
>
> Hello Zoran
>
>
>
> I will try these 2 ways.
>
> Of course, the second way is the easiest, but I will try also the first
> way only to see if it is possible.
>
> I will keep you in touch if the first way can work.
>
>
>
> Best regards,
>
> Nikola
>
>
>
> *De :* Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>
> *Envoyé :* lundi 18 février 2019 15:21
> *À :* Stanisavljevic <n.stanisavljevic at polycaptil.fr>
> *Cc :* Yocto Project <yocto at yoctoproject.org>; Marc Ferland <
> marc.ferland at gmail.com>
> *Objet :* Re: [yocto] yocto touchscreen
>
>
>
> Hello Nikola,
>
>
>
> Two things, which immediately came to my mind:
>
> [1 - Harder way] Either to change xorg-x11-server in sumo to match at
> least xorg-x11-server *1.20.3;*
>
> (harder way, since few people know exact dependencies among various
> GFX packages, and what
>
> and how many packages need to be also changed to make
> xorg-x11-server 1.20.3 to work)
>
> [2 - Easier Way] Either to migrate YOCTO to Thud, where the correct
> xorg-x11-server package 1.20.3
>
> is already fixed and set!
>
> (easier way, since exact dependencies among various GFX packages are
> already set for 1.20.3)
>
>
>
> Best Regards,
>
> Zoran
>
> _______
>
>
>
> On Mon, Feb 18, 2019 at 2:48 PM Stanisavljevic <
> n.stanisavljevic at polycaptil.fr> wrote:
>
> Thank you Zoran for trying to help me.
> I tried to resolve the problem, but I didn’t succeed yet, I think I will
> to continue, and If after some time I find nothing, I’m going to migrate to
> the thud version.
>
>
>
> I will maybe try to use Bugzilla
>
>
>
> Nikola
>
> *De :* Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>
> *Envoyé :* mardi 5 février 2019 19:28
> *À :* Stanisavljevic <n.stanisavljevic at polycaptil.fr>
> *Cc :* Yocto Project <yocto at yoctoproject.org>; marc.ferland at gmail.com
> *Objet :* Re: [yocto] yocto touchscreen
>
>
>
> Hello Nikola,
>
> Let us try to cut to the chase!
>
> After reading what Marc Ferland says/writes, and looking into the
> following:
> https://bugzilla.redhat.com/show_bug.cgi?id=1650634
>
> I have spotted the following:
>
> *Pat Riehecky* *2018-11-20 14:28:22 UTC*
>
>
>
> *the bug remains with the elrepo
> kernels:kernel-ml-4.19.2-1.el7.elrepo.x86_64kernel-lt-4.4.163-1.el7.elrepo.x86_64*
>
> I never had this problem since I do not use Xorg (GFX), rather I only
>
> use serial console from VBox VM from my BBB (pass-through).
>
>
>
> Thus, my suggestion for you, to skip the whole mess is to rebuild your
>
> distro *in the light of YOCTO Project 2.6.1 (thud 20.0.0.1).*
>
>
>
> My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg -
> X11).
>
>
>
> I am using Fedora 29 on my laptop. Also from the bugzilla:
>
> *Pat Riehecky* *2018-11-20 15:46:11 UTC *
>
> *Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6.*
>
> *With this in mind it appears to be an Xorg server bug rather than fbdev.*
>
>
>
> From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019.,
>
> I have the following:
>
>
>
> [ 26.955] Kernel command line: BOOT_IMAGE=/
> *vmlinuz-4.20.6-200.fc29.x86_64*
>
> root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap
> rhgb
>
> quiet LANG=en_US.UTF-8
>
> [ 26.955] Build Date: 11 January 2019 12:47:38PM
> *[ 26.955] Build ID: xorg-x11-server 1.20.3-3.fc29*
> [ 26.955] Current version of pixman: 0.34.0
>
> Best Regards,
> Zoran
> _______
>
> On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic <
> zoran.stojsavljevic at gmail.com> wrote:
> >
> > Hello Nikola,
> >
> > > I created a kernel recipe with a bbappend file, and, I added
> > > the same defconfig that I used for krogoth version.
> > > The bbappend for kernel recipe concern meta-ti layer.
> > > I didn't edited defconfig file in other layers which contain a
> > > kernel recipe.
> >
> > It could be some problem that Sumo does not take your bbappend file into
> the
> > consideration as placed.
> >
> > It could be something else, as well.
> >
> > I have the same issue with my defconfig file for my Thud Beagle Bone
> Black (BBB)
> > standard board. Every time I recompile my YOCTO for it for different
> releases, I need
> > to import my specific defconfig. But I use complete different repos for
> my standard
> > Beagle Bone Black than YOCTO BBB Poky reference distro.
> >
> > Here is what I use in Thud (my bblayers.conf):
> >
> > POKY_BBLAYERS_CONF_VERSION = "2"
> > BBPATH = "${TOPDIR}"
> > BBFILES ?= ""
> >
> > BBLAYERS ?= " \
> > /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \
> >
> /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-networking
> \
> >
> /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-oe \
> >
> /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-python
> \
> > /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
> > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \
> > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"
> >
> > There, I replace defconfig in this layer:
> /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb
> > with my own defconfig.
> >
> > In the directory:
> >
> /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/linux/linux-stable-4.19/beaglebone
> >
> > If you use only Poky repository, then you need to read the following
> paragraph (how to use
> > your defconfig with Poky):
> >
> > [2.3.3. Changing the Configuration] YOCTO Project Linux Development
> Manual
> >
> https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
> > 2.3.3. Changing the Configuration
> >
> > I hope this will help. Please, keep us posted!
> >
> > Zoran
> > _______
> >
> >
> > On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic <
> n.stanisavljevic at polycaptil.fr> wrote:
> >>
> >> Hy Zoran
> >>
> >> Thank's to take time to answer
> >>
> >> I created a kernel recipe with a bbappend file, and, I added the same
> defconfig that I used for krogoth version.
> >> The bbappend for kernel recipe concern meta-ti layer.
> >> I didn't edited defconfig file in other layers which contain a kernel
> recipe.
> >>
> >> I think it's a problem which concern the screen resolution, screen
> frequency and adc touchscreen.
> >> Something is different between the krogoth and sumo version, but I
> didn't find what is changed...
> >>
> >> Xrandr show that problem is maybe around the screen resolution.
> >> It's show the next message : "Size 1024x768 not found in available
> modes"
> >> Maybe it was changed between krogoth and sumo version...but I don't
> know where it is indicated if sources files...
> >>
> >> What do you think ? problem can be around the screen resolution, screen
> frequency and adc touchscreen ?
> >>
> >> Nikola
> >>
> >> -----Message d'origine-----
> >> De : Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>
> >> Envoyé : lundi 4 février 2019 17:08
> >> À : Stanisavljevic <n.stanisavljevic at polycaptil.fr>
> >> Cc : Yocto Project <yocto at yoctoproject.org>
> >> Objet : Re: [yocto] yocto touchscreen
> >>
> >> > I built a first version of this os with version krogoth and it works
> fine.
> >> >
> >> > Now I build a second version of this os with version sumo and the
> >> > touch screen works fine during boot process but when kernel is loaded,
> >> > touchscreen freeze / lock and impossible to use it.
> >>
> >> Did you compare Krogoth kernel defconfig with Sumo kernel defconfig?
> >>
> >> May there are some mismatches in drivers' setup between these two?
> >>
> >> Zoran
> >> _______
> >>
> >> On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic <
> n.stanisavljevic at polycaptil.fr> wrote:
> >> >
> >> > Hy Team,
> >> >
> >> >
> >> >
> >> > I have a problem
> >> >
> >> >
> >> >
> >> > I buid a custom os for AM335x processor and I used yocto to do it.
> >> >
> >> >
> >> >
> >> > I build a first version of this os with version krogoth and it work
> fine.
> >> >
> >> >
> >> >
> >> > Now I build a second version of this os with version sumo and the
> touchscreen work fine during boot process but when kernel is loaded,
> touchscreen freeze / lock and impossible to use it.
> >> >
> >> > The terminal is printed on the touchscreen but the screen is locked,
> impossible to write a command or to move the mouse to select, ….
> >> >
> >> >
> >> >
> >> > Here is the log of boot to the user session (log got with serial
> communication between PC and board) :
> >> >
> >> >
> >> >
> >> > U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)
> >> >
> >> > Trying to boot from MMC1
> >> >
> >> > reading uboot.env
> >> >
> >> > reading u-boot.img
> >> >
> >> > reading u-boot.img
> >> >
> >> > reading u-boot.img
> >> >
> >> > reading u-boot.img
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)
> >> >
> >> >
> >> >
> >> > CPU : AM335X-GP rev 2.1
> >> >
> >> > Model: TI AM335x EVM-SK
> >> >
> >> > DRAM: 256 MiB
> >> >
> >> > NAND: 0 MiB
> >> >
> >> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> >> >
> >> > reading uboot.env
> >> >
> >> > ERROR: No USB device found
> >> >
> >> >
> >> >
> >> > at drivers/usb/gadget/ether.c:2709/usb_ether_init()
> >> >
> >> > Net: CACHE: Misaligned operation at range [8df323c0, 8df32464]
> >> >
> >> >
> >> >
> >> > Warning: ethernet at 4a100000 using MAC address from ROM
> >> >
> >> > eth0: ethernet at 4a100000
> >> >
> >> > Hit any key to stop autoboot: 0
> >> >
> >> > reading zImage
> >> >
> >> > 3412752 bytes read in 251 ms (13 MiB/s)
> >> >
> >> > reading dtb
> >> >
> >> > 39733 bytes read in 12 ms (3.2 MiB/s)
> >> >
> >> > ## Flattened Device Tree blob at 82000000
> >> >
> >> > Booting using the fdt blob at 0x82000000
> >> >
> >> > Loading Device Tree to 8df19000, end 8df25b34 ... OK
> >> >
> >> >
> >> >
> >> > Starting kernel ...
> >> >
> >> >
> >> >
> >> > [ 0.000000] Booting Linux on physical CPU 0x0
> >> >
> >> > [ 0.000000] Initializing cgroup subsys cpu
> >> >
> >> > [ 0.000000] Initializing cgroup subsys cpuacct
> >> >
> >> > [ 0.000000] Linux version 4.4.19-ge581bb1cac
> (polycaptil at polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 PREEMPT
> Thu May 24 11:42:17 CEST 2018
> >> >
> >> > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
> cr=10c5387d
> >> >
> >> > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
> >> >
> >> > [ 0.000000] Machine model: TI AM335x EVM-SK
> >> >
> >> > [ 0.000000] cma: Reserved 48 MiB at 0x8a800000
> >> >
> >> > [ 0.000000] Memory policy: Data cache writeback
> >> >
> >> > [ 0.000000] CPU: All CPU(s) started in SVC mode.
> >> >
> >> > [ 0.000000] AM335X ES2.1 (sgx neon )
> >> >
> >> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping
> on. Total pages: 64960
> >> >
> >> > [ 0.000000] Kernel command line: console=ttyO0,115200
> root=/dev/mmcblk0p3 rw
> >> >
> >> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
> >> >
> >> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5,
> 131072 bytes)
> >> >
> >> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> bytes)
> >> >
> >> > [ 0.000000] Memory: 200444K/262144K available (6495K kernel code,
> 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, 49152K
> cma-reserved, 0K highmem)
> >> >
> >> > [ 0.000000] Virtual kernel memory layout:
> >> >
> >> > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> >> >
> >> > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> >> >
> >> > [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
> >> >
> >> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> >> >
> >> > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> >> >
> >> > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> >> >
> >> > [ 0.000000] .text : 0xc0008000 - 0xc08b0034 (8865 kB)
> >> >
> >> > [ 0.000000] .init : 0xc08b1000 - 0xc08f2000 ( 260 kB)
> >> >
> >> > [ 0.000000] .data : 0xc08f2000 - 0xc09407f0 ( 314 kB)
> >> >
> >> > [ 0.000000] .bss : 0xc09407f0 - 0xc0982d58 ( 266 kB)
> >> >
> >> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
> Nodes=1
> >> >
> >> > [ 0.000000] Preemptible hierarchical RCU implementation.
> >> >
> >> > [ 0.000000] Build-time adjustment of leaf fanout to 32.
> >> >
> >> > [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> >> >
> >> > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with
> 128 interrupts
> >> >
> >> > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
> >> >
> >> > [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
> every 89478484971ns
> >> >
> >> > [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635851949 ns
> >> >
> >> > [ 0.000047] OMAP clocksource: timer1 at 24000000 Hz
> >> >
> >> > [ 0.000222] clocksource_probe: no matching clocksources found
> >> >
> >> > [ 0.000415] Console: colour dummy device 80x30
> >> >
> >> > [ 0.000442] WARNING: Your 'console=ttyO0' has been replaced by
> 'ttyS0'
> >> >
> >> > [ 0.000448] This ensures that you still see kernel messages. Please
> >> >
> >> > [ 0.000454] update your kernel commandline.
> >> >
> >> > [ 0.000473] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
> >> >
> >> > [ 0.089064] pid_max: default: 32768 minimum: 301
> >> >
> >> > [ 0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096
> bytes)
> >> >
> >> > [ 0.089205] Mountpoint-cache hash table entries: 1024 (order: 0,
> 4096 bytes)
> >> >
> >> > [ 0.089932] Initializing cgroup subsys io
> >> >
> >> > [ 0.089964] Initializing cgroup subsys memory
> >> >
> >> > [ 0.090005] Initializing cgroup subsys devices
> >> >
> >> > [ 0.090021] Initializing cgroup subsys freezer
> >> >
> >> > [ 0.090036] Initializing cgroup subsys perf_event
> >> >
> >> > [ 0.090048] Initializing cgroup subsys pids
> >> >
> >> > [ 0.090078] CPU: Testing write buffer coherency: ok
> >> >
> >> > [ 0.090499] Setting up static identity map for 0x80008200 -
> 0x80008258
> >> >
> >> > [ 0.092680] devtmpfs: initialized
> >> >
> >> > [ 0.105440] VFP support v0.3: implementor 41 architecture 3 part
> 30 variant c rev 3
> >> >
> >> > [ 0.120529] omap_hwmod: debugss: _wait_target_disable failed
> >> >
> >> > [ 0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
> >> >
> >> > [ 0.179852] pinctrl core: initialized pinctrl subsystem
> >> >
> >> > [ 0.181216] NET: Registered protocol family 16
> >> >
> >> > [ 0.183420] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> >> >
> >> > [ 0.209061] cpuidle: using governor ladder
> >> >
> >> > [ 0.239048] cpuidle: using governor menu
> >> >
> >> > [ 0.243661] OMAP GPIO hardware version 0.1
> >> >
> >> > [ 0.254360] hw-breakpoint: debug architecture 0x4 unsupported.
> >> >
> >> > [ 0.297629] edma 49000000.edma: TI EDMA DMA engine driver
> >> >
> >> > [ 0.298606] reg-fixed-voltage fixedregulator at 2: could not find
> pctldev for node /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_wl12xx_gpio,
> deferring probe
> >> >
> >> > [ 0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node
> /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_i2c0_pins, deferring
> probe
> >> >
> >> > [ 0.302525] media: Linux media interface: v0.10
> >> >
> >> > [ 0.302588] Linux video capture interface: v2.00
> >> >
> >> > [ 0.302638] pps_core: LinuxPPS API ver. 1 registered
> >> >
> >> > [ 0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti at linux.it>
> >> >
> >> > [ 0.302676] PTP clock support registered
> >> >
> >> > [ 0.302741] EDAC MC: Ver: 3.0.0
> >> >
> >> > [ 0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
> >> >
> >> > [ 0.304332] Advanced Linux Sound Architecture Driver Initialized.
> >> >
> >> > [ 0.305512] clocksource: Switched to clocksource timer1
> >> >
> >> > [ 0.316775] NET: Registered protocol family 2
> >> >
> >> > [ 0.317599] TCP established hash table entries: 2048 (order: 1,
> 8192 bytes)
> >> >
> >> > [ 0.317636] TCP bind hash table entries: 2048 (order: 1, 8192
> bytes)
> >> >
> >> > [ 0.317663] TCP: Hash tables configured (established 2048 bind
> 2048)
> >> >
> >> > [ 0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes)
> >> >
> >> > [ 0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> >> >
> >> > [ 0.317925] NET: Registered protocol family 1
> >> >
> >> > [ 0.318352] RPC: Registered named UNIX socket transport module.
> >> >
> >> > [ 0.318366] RPC: Registered udp transport module.
> >> >
> >> > [ 0.318372] RPC: Registered tcp transport module.
> >> >
> >> > [ 0.318379] RPC: Registered tcp NFSv4.1 backchannel transport
> module.
> >> >
> >> > [ 0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU
> driver, 5 counters available
> >> >
> >> > [ 0.321392] futex hash table entries: 256 (order: -1, 3072 bytes)
> >> >
> >> > [ 0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> >> >
> >> > [ 0.330717] NFS: Registering the id_resolver key type
> >> >
> >> > [ 0.330798] Key type id_resolver registered
> >> >
> >> > [ 0.330807] Key type id_legacy registered
> >> >
> >> > [ 0.330886] ntfs: driver 2.1.32 [Flags: R/O].
> >> >
> >> > [ 0.334673] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 248)
> >> >
> >> > [ 0.334706] io scheduler noop registered
> >> >
> >> > [ 0.334719] io scheduler deadline registered
> >> >
> >> > [ 0.334877] io scheduler cfq registered (default)
> >> >
> >> > [ 0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa
> f9e10800 size 568
> >> >
> >> > [ 0.339415] backlight supply power not found, using dummy regulator
> >> >
> >> > [ 0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing
> disabled
> >> >
> >> > [ 0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
> base_baud = 3000000) is a 8250
> >> >
> >> > [ 1.017357] console [ttyS0] enabled
> >> >
> >> > [ 1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159,
> base_baud = 3000000) is a 8250
> >> >
> >> > [ 1.032273] [drm] Initialized drm 1.1.0 20060810
> >> >
> >> > [ 1.039564] [drm] Supports vblank timestamp caching Rev 2
> (21.10.2013).
> >> >
> >> > [ 1.046349] [drm] No driver support for vblank timestamp query.
> >> >
> >> > [ 1.062121] Console: switching to colour frame buffer device 60x34
> >> >
> >> > [ 1.070360] tilcdc 4830e000.lcdc: fb0: frame buffer device
> >> >
> >> > [ 1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
> >> >
> >> > [ 1.118644] loop: module loaded
> >> >
> >> > [ 1.124253] libphy: Fixed MDIO Bus: probed
> >> >
> >> > [ 1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
> >> >
> >> > [ 1.191695] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
> >> >
> >> > [ 1.198786] libphy: 4a101000.mdio: probed
> >> >
> >> > [ 1.202886] davinci_mdio 4a101000.mdio: phy[0]: device
> 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
> >> >
> >> > [ 1.212890] cpsw 4a100000.ethernet: Detected MACID =
> a0:f6:fd:4c:a6:ba
> >> >
> >> > [ 1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =
> c4:ed:ba:88:2a:92
> >> >
> >> > [ 1.229382] mousedev: PS/2 mouse device common for all mice
> >> >
> >> > [ 1.235845] i2c /dev entries driver
> >> >
> >> > [ 1.240508] cpuidle: enable-method property 'ti,am3352' found
> operations
> >> >
> >> > [ 1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO
> >> >
> >> > [ 1.275713] pinctrl-single 44e10800.pinmux: bad data for mux
> pinmux_mmc2_pins
> >> >
> >> > [ 1.282895] pinctrl-single 44e10800.pinmux: no pins entries for
> pinmux_mmc2_pins
> >> >
> >> > [ 1.317159] ledtrig-cpu: registered to indicate activity on CPUs
> >> >
> >> > [ 1.326069] NET: Registered protocol family 10
> >> >
> >> > [ 1.332092] sit: IPv6 over IPv4 tunneling driver
> >> >
> >> > [ 1.337715] NET: Registered protocol family 17
> >> >
> >> > [ 1.342510] Key type dns_resolver registered
> >> >
> >> > [ 1.347095] omap_voltage_late_init: Voltage driver support not
> added
> >> >
> >> > [ 1.407145] tps65910-rtc tps65910-rtc: rtc core: registered
> tps65910-rtc as rtc0
> >> >
> >> > [ 1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
> >> >
> >> > [ 1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO
> >> >
> >> > [ 1.426813] vmmc: supplied by vbat
> >> >
> >> > [ 1.466341] pinctrl-single 44e10800.pinmux: bad data for mux
> pinmux_mmc2_pins
> >> >
> >> > [ 1.474737] pinctrl-single 44e10800.pinmux: no pins entries for
> pinmux_mmc2_pins
> >> >
> >> > [ 1.513247] mmc0: host does not support reading read-only switch,
> assuming write-enable
> >> >
> >> > [ 1.523414] mmc0: new high speed SDHC card at address 0001
> >> >
> >> > [ 1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB
> >> >
> >> > [ 1.535996] mmcblk0: p1 p2 p3
> >> >
> >> > [ 1.595932] vdd_mpu: supplied by vbat
> >> >
> >> > [ 1.602167] input: gpio_buttons at 0 as
> /devices/platform/gpio_buttons at 0/input/input0
> >> >
> >> > [ 1.618291] tps65910-rtc tps65910-rtc: setting system clock to
> 2019-02-01 20:07:49 UTC (1549051669)
> >> >
> >> > [ 1.639394] lis3_reg: disabling
> >> >
> >> > [ 1.655732] ALSA device list:
> >> >
> >> > [ 1.658720] No soundcards found.
> >> >
> >> > [ 1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to
> feature incompatibilities
> >> >
> >> > [ 1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to
> feature incompatibilities
> >> >
> >> > [ 2.183999] EXT4-fs (mmcblk0p3): recovery complete
> >> >
> >> > [ 2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered
> data mode. Opts: (null)
> >> >
> >> > [ 2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3.
> >> >
> >> > [ 2.225670] devtmpfs: mounted
> >> >
> >> > [ 2.235781] Freeing unused kernel memory: 260K (c08b1000 -
> c08f2000)
> >> >
> >> > [ 2.242162] This architecture does not have kernel memory
> protection.
> >> >
> >> > INIT: version 2.88 booting
> >> >
> >> > Starting udev
> >> >
> >> > [ 3.090091] udevd[78]: starting version 3.2.5
> >> >
> >> > [ 3.106175] random: udevd: uninitialized urandom read (16 bytes
> read, 26 bits of entropy available)
> >> >
> >> > [ 3.118667] random: udevd: uninitialized urandom read (16 bytes
> read, 26 bits of entropy available)
> >> >
> >> > [ 3.128014] random: udevd: uninitialized urandom read (16 bytes
> read, 26 bits of entropy available)
> >> >
> >> > [ 3.137335] random: udevd: uninitialized urandom read (16 bytes
> read, 26 bits of entropy available)
> >> >
> >> > [ 3.218433] udevd[79]: starting eudev-3.2.5
> >> >
> >> > [ 3.325886] random: udevd: uninitialized urandom read (16 bytes
> read, 29 bits of entropy available)
> >> >
> >> > [ 3.346155] random: udevd: uninitialized urandom read (16 bytes
> read, 29 bits of entropy available)
> >> >
> >> > [ 4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
> >> >
> >> > [ 5.548283] random: dd: uninitialized urandom read (512 bytes
> read, 43 bits of entropy available)
> >> >
> >> > INIT: Entering runlevel: 5
> >> >
> >> > Configuring network interfaces... [ 5.820546] net eth0:
> initializing cpsw version 1.12 (0)
> >> >
> >> > [ 5.825987] net eth0: initialized cpsw ale version 1.4
> >> >
> >> > [ 5.831150] net eth0: ALE Table size 1024
> >> >
> >> > [ 5.838581] net eth0: phy found : id is : 0x7c0f1
> >> >
> >> > [ 5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> >> >
> >> > [ 9.896392] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full
> - flow control rx/tx
> >> >
> >> > [ 9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> >> >
> >> > chown: unrecognized option '--reference=/etc/resolv.conf'
> >> >
> >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.
> >> >
> >> >
> >> >
> >> > Usage: chown [-Rh]... USER[:[GRP]] FILE...
> >> >
> >> > chmod: unrecognized option '--reference=/etc/resolv.conf'
> >> >
> >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.
> >> >
> >> >
> >> >
> >> > Usage: chmod [-R] MODE[,MODE]... FILE...
> >> >
> >> > done.
> >> >
> >> > Starting system message bus: [ 14.887099] random: dbus-daemon:
> uninitialized urandom read (12 bytes read, 62 bits of entropy available)
> >> >
> >> > [ 14.912318] random: dbus-daemon: uninitialized urandom read (12
> bytes read, 62 bits of entropy available)
> >> >
> >> > dbus.
> >> >
> >> > Starting OpenBSD Secure Shell server: sshd
> >> >
> >> > [ 15.393971] random: sshd: uninitialized urandom read (32 bytes
> read, 65 bits of entropy available)
> >> >
> >> > done.
> >> >
> >> > Starting Xserver
> >> >
> >> > Starting DHCP server:
> >> >
> >> > .
> >> >
> >> > starting DNS forwarder and DHCP server: dnsmasq...
> >> >
> >> > X.Org X Server 1.19.6
> >> >
> >> > Release Date: 2017-12-20
> >> >
> >> > X Protocol Version 11, Revision 0
> >> >
> >> > Build Operating System: Linux 4.15.0-38-generic x86_64
> >> >
> >> > Current Operating System: Linux polycaptil-machine-am335x-evmsk
> >> > 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l
> >> >
> >> > Kernel command line: console=ttyO0,115200 root=/dev/mmcblk0p3 rw
> >> >
> >> > Build Date: 05 November 2018 09:33:21PM
> >> >
> >> >
> >> >
> >> > Current version of pixman: 0.34.0
> >> >
> >> > Before reporting problems, check http://wiki.x.org
> >> >
> >> > to make sure that you have the latest version.
> >> >
> >> > Markers: (--) probed, (**) from config file, (==) default setting,
> >> >
> >> > (++) from command line, (!!) notice, (II) informational,
> >> >
> >> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> >
> >> > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 2019
> >> >
> >> > (==) Using config file: "/etc/X11/xorg.conf"
> >> >
> >> > (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> >> >
> >> > done.
> >> >
> >> > Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
> >> >
> >> > nl80211: 'nl80211' generic netlink not found
> >> >
> >> > Failed to initialize driver 'nl80211'
> >> >
> >> > wlan0: interface state UNINITIALIZED->DISABLED
> >> >
> >> > wlan0: AP-DISABLED
> >> >
> >> > hostapd_free_hapd_data: Interface wlan0 wasn't started
> >> >
> >> > Starting ntpd: done
> >> >
> >> > Starting syslogd/klogd: done
> >> >
> >> > Starting crond: OK
> >> >
> >> >
> >> >
> >> > Poky (Yocto Project Reference Distro) 2.5
> >> > polycaptil-machine-am335x-evmsk /dev/ttyS0
> >> >
> >> >
> >> >
> >> > polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon
> >> > address is:
> >> > unix:abstract=/tmp/dbus-07WuJSySeb,guid=a3e41f2692316c19766e95535c54a7
> >> > 25
> >> >
> >> > Size 1024x768 not found in available modes
> >> >
> >> > Error: No calibratable devices found.
> >> >
> >> > matchbox: Cant find a keycode for keysym 269025056
> >> >
> >> > matchbox: ignoring key shortcut XF86Calendar=!$contacts
> >> >
> >> >
> >> >
> >> > matchbox: Cant find a keycode for keysym 2809
> >> >
> >> > matchbox: ignoring key shortcut telephone=!$dates
> >> >
> >> >
> >> >
> >> > matchbox: Cant find a keycode for keysym 269025050
> >> >
> >> > matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
> >> >
> >> >
> >> >
> >> > dbus-daemon[358]: Activating service name='org.a11y.atspi.Registry'
> >> > requested by ':1.0' (uid=0 pid=354 comm="matchbox-terminal ")
> >> >
> >> > dbus-daemon[358]: Successfully activated service
> 'org.a11y.atspi.Registry'
> >> >
> >> > SpiRegistry daemon is running with well-known name -
> >> > org.a11y.atspi.Registry
> >> >
> >> > [ 30.662697] random: nonblocking pool is initialized
> >> >
> >> >
> >> >
> >> > Poky (Yocto Project Reference Distro) 2.5
> >> > polycaptil-machine-am335x-evmsk /dev/ttyS0
> >> >
> >> >
> >> >
> >> > Thank’s to take time to read my message.
> >> >
> >> > N.Stanisavljevic
> >> >
> >> > --
> >> > _______________________________________________
> >> > yocto mailing list
> >> > yocto at yoctoproject.org
> >> > https://lists.yoctoproject.org/listinfo/yocto
> >>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20190408/764e53b4/attachment-0001.html>
More information about the yocto
mailing list