[yocto] Fwd: [meta-raspberrypi] Problem with adding udev rules

[Outback Dingo]

On Tue, Nov 6, 2018 at 11:57 AM Markus W <markus4dev at gmail.com> wrote:
>
> Hi!
>
> I want to append the rules in the
> recipe-core/udev/udev-rules-rpi/99-com.rules with the rules below from
> within my own recipe. I can´t figure out how to do that.
>
> I have tried to add those rules as separate rules file in a recipe in
> my own layer. After the build I can see that the rules file is in the
> correct directory /etc/udev/rules.d (next to 99-com.rules) but the
> rules didn't get applied. The groups below I have created by
> inheriting the useradd class (GROUPADD_PARAM_${PN} = "-r spi; -r i2c;
> -r gpio") in a different layer with a higher priority than the layer
> with the rules recipe.
>
> Not sure why this is not working. Any suggestions?
>
> 90-interfaces.rules file:
>
> SUBSYSTEM=="input", GROUP="input", MODE="0660"
> SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660"
> SUBSYSTEM=="spidev", GROUP="spi", MODE="0660"
> SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660"
>
> SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"
> SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\
> chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\
> chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770
> /sys/devices/virtual/gpio;\
> chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\
> '"
>

might help to post the recipe used.....


> Regards,
> Markus
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto