[yocto] QT5.8 -qtwebengine SDK generation fails

[Khem Raj]

there isnt enough information in the logs that can be built upon to
help you. you might want to enable some verbosity with smart and try
to find out why it fails.

secondly, try the same with newer releases and see if the problem is
reproducible.

On Sun, May 6, 2018 at 11:18 PM, Chinthamol CS.
<Chinthamol.CS at nestgroup.net> wrote:
> Hi,
>
> We are using a i.MX8 board and we need to develop QT application based on
> qtwebengine. QT version used here is 5.8.
>
> We are using QT Creator with an external tool chain. we have to populate the
> SDK out of our yocto image.
>
> When we start to include qtwebengine to the
> packagegroup-qt5-toolchain-target.bb, we are getting errors. This step is
> required as otherwise the qtwebengine binary will be missing in the SDK and
> QT Creator will complain about that.
>
> We are using the imx-morty branch with Kernel Version  as 4.9.51of the i.MX
> yocto BSP.
>
> The problem can be triggered with either "bitbake -c populate_sdk
> image-name" or with "bitbake meta-toolchain-qt5".
>
> Error log is attached with this email. We really cannot find the reason why.
>
> Any tips for how to proceed?
>
> Below mentioned link says, Use webkit instead of webengine.
>
> https://community.nxp.com/thread/473203#
>
> Anyway we have to use qtwebengine for web browsing, not qtwebkit.. Please
> provide one solution to resolve this issue.
>
> Any help from anyone is greatly appreciated.
>
>
>
> Thanks,
>
> Chintha
>
>
>
>
>
> ________________________________
>
> Confidentiality Statement / Disclaimer : This message and any attachments is
> intended for the sole use of the intended recipient. It may contain
> confidential information. Any unauthorized use, dissemination or
> modification is strictly prohibited. If you are not the intended recipient,
> please notify the sender immediately then delete it from all your systems,
> and do not copy, use or print. Internet communications are not secure and it
> is the responsibility of the recipient to make sure that it is
> virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized alterations or
> modifications made to the contents. If you require any form of confirmation
> of the contents, please contact the company/sender. The company/sender is
> not liable for any errors or omissions in the content of this message.
>
> ________________________________
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>