[yocto] chromium is compiling but is not able to add in the image

Pandey, Kamal Kamal.Pandey at ifm.com
Thu Aug 23 23:24:44 PDT 2018


Thankyou very much for the response.
core-image-minimal-pdm3  is a custom image made from proprietary meta-pdm3 layer. This layer is used to create images and packages for custom embedded device.
I ve enabled x11 in conf/local.conf file.
IMAGE_INSTALL_append = " x11  \
			         chromium \  

and yes that device has a mali GPU support.

-----Original Message-----
From: Stefano Babic <sbabic at denx.de> 
Sent: 23 August 2018 21:26
To: Pandey, Kamal <Kamal.Pandey at ifm.com>
Cc: Ross, Fedor <fedor.ross at ifm.com>; Barth, Steffen <steffen.barth at ifm.com>; Marek Vasut <marex at denx.de>
Subject: Re: [yocto] chromium is compiling but is not able to add in the image

Hi Kamal,

(out of list):

I just seen your post to Yocto'sML...

On 21/08/2018 15:28, Pandey, Kamal wrote:
> I tried adding chromium package via the meta-browser layer. It is 
> compiling when I run */$ bitbake chromium/*/./ But when I run 
> */$bitbake core-image-minimal-pdm3/*.

..but I can understand that nobody has the small idea what
core-image-minimal-pdm3 is !

> It’s not adding chromium to the image and throwing errors as shown 
> below:
> 
>  
> 
> Loading cache: 100%
> |#####################################################################
> |#####################################################################
> |##########################################################|
> Time: 0:00:00
> 
> Loaded 3249 entries from dependency cache.
> 
> Parsing recipes: 100%
> |#####################################################################
> |#####################################################################
> |########################################################|
> Time: 0:00:02
> 
> Parsing of 2368 .bb files complete (2352 cached, 16 parsed). 3260 
> targets, 99 skipped, 10 masked, 0 errors.
> 
> WARNING: No recipes available for:
> 
>  
> /home/iepl/work/yocto_build/meta-xilinx/meta-xilinx-contrib/recipes-ke
> rnel/linux/linux-xlnx_2018.1.bbappend
> 
>  
> /home/iepl/work/yocto_build/meta-pdm3/meta-ifm-pdm3-bsp/recipes-extend
> ed/images/swupdate-gui-image.bbappend
> 
>  
> /home/iepl/work/yocto_build/meta-pdm3/meta-ifm-pdm3-bsp/recipes-suppor
> t/rescuegui/rescuegui_%.bbappend
> 
>  
> /home/iepl/work/yocto_build/meta-pdm3/meta-ifm-pdm3-bsp/recipes-suppor
> t/swupdate/swupdate_%.bbappend
> 
>  
> /home/iepl/work/yocto_build/meta-pdm3/meta-ifm-pdm3/recipes-mono/mono/
> mono-native_5.4.1.6.bbappend
> 

Your bblayers.conf is maybe a mess. They are solved in meta-ifm-pdm3 and meta-ifm-pdm3-bsp

> NOTE: Resolving any missing task queue dependencies
> 
> ERROR: Nothing RPROVIDES 'chromium' (but 
> /home/iepl/work/yocto_build/meta-pdm3/meta-ifm-pdm3-bsp/recipes-core/i
> mages/core-image-minimal-pdm3.bb
> RDEPENDS on or otherwise requires it)
> 
> NOTE: Runtime target 'chromium' is unbuildable, removing...
> 
> Missing or unbuildable dependency chain was: ['chromium']
> 
> ERROR: Required build target 'core-image-minimal-pdm3' has no 
> buildable providers.
> 
> Missing or unbuildable dependency chain was: 
> ['core-image-minimal-pdm3', 'chromium']
> 
>  
> 
> Summary: There was 1 WARNING message shown.
> 
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
> 
> The bblayers.conf file is taken care off.
> 
> I’ve added the line
> 
> */IMAGE_INSTALL_append = “ chromium”/* in the local.conf file along 
> with
>  */LICENSE_FLAG_WHITELIST = /**//**//*
> 
> */" commercial_libav commercial_x264 commercial/**/"/*
> 
> Apart from that Firefox is able to compile and it’s been added to the 
> image. Can somebody tell me what is causing this issue.
> 
>  
> 

Apart of that, are you trying to get in running with something provided by Marek for Mali (GPU support) ? I just warn that Chromium without GPU is very slow and pratically unusable. Even with GPU support it looks quite slow...

Are you enable x11 ? As far as I know, chromium is running just on top of x11 - I added Marek in CC that can sugest something else.

Best regards,
Stefano Babic


--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================



More information about the yocto mailing list