[yocto] about add python3 modules

[Lai Y.C.]

Hi Ross,

Thanks! It works well after I added python3-misc.

//Ying

2017-10-31 0:02 GMT+01:00 Burton, Ross <ross.burton at intel.com>:

> Hi,
>
> 1.7.1 is pretty old, there were some packaging problems.  Try adding
> python3-misc to the image too.
>
> If that doesn't work, use 'oe-pkgdata-util list-pkg-files -r python3' to
> list all the files built by the python3 recipe and to find out what files
> are missing.
>
> Ross
>
> On 30 October 2017 at 20:36, Lai Y.C. <yclai017 at gmail.com> wrote:
>
>> Hi,
>>
>> I need to include python3 and some modules on my board. We are using
>> yocto 1.7.1 .
>> I have included python3 and python3-modules into the image.
>> Python3 is able to run but there are problems with the modules.
>>
>> 1. when I import "subprocess" module,  it gives errors that the module
>> "_posixsubprocess" is not found. How should I include _posixsubprocess ?
>> 2. There are couple of modules that are installed but they are found when
>> I used it. i.e. I have the argparse.py in /usr/lib/python3.3. However, the
>> module is not found when I try to import it. (tested with python3 -c
>> "import argparse"). Any clue what hasn't be set-up properly?
>>
>> Thanks
>>
>> //Ying
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20171031/3a4ecf9b/attachment.html>