[yocto] Morty 2.2.1 build failure

Wed Mar 22 02:14:33 PDT 2017

Hi,

You are right Armin and here is the revert commit for the morty branch:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?h=morty&id=e292e935b077a95ae093d4b425c7e95b177b030b

Joël Esponde

> -----Message d'origine-----
> De : yocto-bounces at yoctoproject.org [mailto:yocto-
> bounces at yoctoproject.org] De la part de akuster808
> Envoyé : mercredi 22 mars 2017 03:07
> À : yocto at yoctoproject.org
> Objet : Re: [yocto] Morty 2.2.1 build failure
> 
> 
> Greg,
> 
> On 03/21/2017 04:29 PM, Greg Wilson-Lindberg wrote:
> > Hello List,
> >
> > I got a copy of the book "Embedded Linux Systems with the Yocto Project"
> at the SCALE 15x conference and this prompted me to try building the Yocto
> Poky build before getting the Boot to Qt Yocto build environment.
> >
> > I tried building on 2 x86 systems, a 64 bit system at work and a 32 bit system
> at my home, both failed in the same way:
> >
> > gwilson 11:06:54:~/yocto/poky-morty-16.0.1$ source ./oe-init-build-env
> > You had no conf/local.conf file. This configuration file has therefore
> > been created for you with some default values. You may wish to edit it
> > to, for example, select a different MACHINE (target hardware). See
> > conf/local.conf for more information as common configuration options are
> commented.
> >
> > You had no conf/bblayers.conf file. This configuration file has
> > therefore been created for you with some default values. To add
> > additional metadata layers into your configuration please add entries to
> conf/bblayers.conf.
> >
> > The Yocto Project has extensive documentation about OE including a
> > reference manual which can be found at:
> >      http://yoctoproject.org/documentation
> >
> > For more information about OpenEmbedded see their website:
> >      http://www.openembedded.org/
> >
> >
> > ### Shell environment set up for builds. ###
> >
> > You can now run 'bitbake <target>'
> >
> > Common targets are:
> >      core-image-minimal
> >      core-image-sato
> >      meta-toolchain
> >      meta-ide-support
> >
> > You can also run generated qemu images with a command like 'runqemu
> qemux86'
> > gwilson 11:07:08:~/yocto/poky-morty-16.0.1/build$
> > gwilson 11:07:10:~/yocto/poky-morty-16.0.1/build$
> > gwilson 11:07:11:~/yocto/poky-morty-16.0.1/build$ bitbake
> > core-image-sato Parsing recipes: 100%
> >
> |#########################################################
> ###################################| Time: 0:00:29 Parsing of 864
> .bb files complete (0 cached, 864 parsed). 1318 targets, 50 skipped, 0 masked,
> 0 errors.
> > NOTE: Resolving any missing task queue dependencies
> >
> > Build Configuration:
> > BB_VERSION        = "1.32.0"
> > BUILD_SYS         = "x86_64-linux"
> > NATIVELSBSTRING   = "Ubuntu-14.04"
> > TARGET_SYS        = "i586-poky-linux"
> > MACHINE           = "qemux86"
> > DISTRO            = "poky"
> > DISTRO_VERSION    = "2.2.1"
> > TUNE_FEATURES     = "m32 i586"
> > TARGET_FPU        = ""
> > meta
> > meta-poky
> > meta-yocto-bsp    = "<unknown>:<unknown>"
> >
> > NOTE: Fetching uninative binary shim from
> > http://downloads.yoctoproject.org/releases/uninative/1.4/x86_64-native
> > sdk-
> libc.tar.bz2;sha256sum=101ff8f2580c193488db9e76f9646fb6ed38b65fb76
> > f403acb0e2178ce7127ca
> > --2017-03-20 11:07:57--
> > http://downloads.yoctoproject.org/releases/uninative/1.4/x86_64-native
> > sdk-libc.tar.bz2 Resolving downloads.yoctoproject.org
> > (downloads.yoctoproject.org)... 198.145.20.127 Connecting to
> > downloads.yoctoproject.org
> (downloads.yoctoproject.org)|198.145.20.127|:80... connected.
> > HTTP request sent, awaiting response... 200 OK
> > Length: 2473216 (2.4M) [application/octet-stream] Saving to:
> > '/home/gwilson/yocto/poky-morty-
> 16.0.1/build/downloads/uninative/101ff8f2580c193488db9e76f9646fb6ed38b
> 65fb76f403acb0e2178ce7127ca/x86_64-nativesdk-libc.tar.bz2'
> >
> >
> > 2017-03-20 11:07:58 (6.62 MB/s) -
> > '/home/gwilson/yocto/poky-morty-
> 16.0.1/build/downloads/uninative/101ff
> >
> 8f2580c193488db9e76f9646fb6ed38b65fb76f403acb0e2178ce7127ca/x86_64-
> nat
> > ivesdk-libc.tar.bz2' saved [2473216/2473216]
> >
> > Initialising tasks: 100%
> >
> |#########################################################
> ############
> > ####################| Time: 0:00:15
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > WARNING: flex-native-2.6.0-r0 do_fetch: Failed to fetch URL
> > http://downloads.sourceforge.net/flex/flex-2.6.0.tar.bz2, attempting
> > MIRRORS if available
> > WARNING: file-native-5.28-r0 do_fetch: Failed to fetch URL
> > git://github.com/file/file.git, attempting MIRRORS if available
> > ERROR: file-native-5.28-r0 do_fetch: Fetcher failure: Unable to find
> > revision 3c521817322a6bf5160cfeb09b9145ccde587b2a in branch master
> > even from upstream
> > ERROR: file-native-5.28-r0 do_fetch: Fetcher failure for URL:
> 'git://github.com/file/file.git'. Unable to fetch URL from any source.
> 
> this is a known issue and should be fixed now (again). The upstream repo
> had issues which caused the hashes to not match. I heard the repo got
> corrected.
> 
> > ERROR: file-native-5.28-r0 do_fetch: Function failed: base_do_fetch
> > ERROR: Logfile of failure stored in:
> > /home/gwilson/yocto/poky-morty-16.0.1/build/tmp/work/x86_64-
> linux/file
> > -native/5.28-r0/temp/log.do_fetch.23747
> > ERROR: Task (virtual:native:/home/gwilson/yocto/poky-morty-
> 16.0.1/meta/recipes-devtools/file/file_5.28.bb:do_fetch) failed with exit
> code '1'
> > NOTE: Tasks Summary: Attempted 203 tasks of which 0 didn't need to be
> rerun and 1 failed.
> >
> > Summary: 1 task failed:
> >
> > virtual:native:/home/gwilson/yocto/poky-morty-16.0.1/meta/recipes-devt
> > ools/file/file_5.28.bb:do_fetch
> > Summary: There were 2 WARNING messages shown.
> > Summary: There were 3 ERROR messages shown, returning a non-zero exit
> code.
> > gwilson 11:13:14:~/yocto/poky-morty-16.0.1/build$
> >
> > I get 1 file that needs to go to a mirror and a second file that can't be found
> at all.
> Please try again.
> >
> > Are these known bugs? Do I need to just back up and use Morty 2.2?
> This affected 2.1, 2.2 and master.
> 
> regards,
> Armin
> >
> > Regards,
> >
> > Greg Wilson-Lindberg
> > Sakura Finetek
> > 310-783-5075
> 
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto