[yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?

Riko Ho antonius.riko at gmail.com
Mon Jun 19 20:35:23 PDT 2017


I've put meta == > linux-firmware, but stil doesn't work, probably a 
hardware issue ?

I'll post my debug log later on,

I've checked that it can read *.bin on /lib/firmware, but still can not 
initialize properly, don't know why yet.

On 20/06/17 03:57, Khem Raj wrote:
> On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.riko at gmail.com> wrote:
>> Hello Everyone,
>>
>> How can I obtain : rtl8192eu_nic.bin?
>>
>> I got this message :
>>
>> RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
>> usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60
>> usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
>> usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with
>> error -2
>> usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
>>
> you probably need to add the nonfree firmware bits something like this
>
> https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend
>
> and
>
> https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb
>
> might help
>
>> Thanks,
>>
>> On 18/06/17 15:49, Martin Jansa wrote:
>>
>> You didn't say which versions you're using.
>>
>> If you're using latest oe-core with gcc7 then you will need v3 version of
>> this change:
>> http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html
>> I'll send it later today.
>>
>>> And how can I clean after building it ? It took about 70Gb of my drive
>> Like any other recipe:
>> bitbake -c clean foo
>>
>> On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.riko at gmail.com> wrote:
>>> Hello Everyone,
>>>
>>> I tried to compile chromium but never succeeded, took me already 12 hours
>>> and stopped on 99%,
>>> I used bitbake for doing it,
>>>
>>> Is chromium not compatible with arm CPU ? it was working with X86_64
>>> before.
>>> And how can I clean after building it ? It took about 70Gb of my drive
>>>
>>> Thanks
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>> --
>>
>> /*******/
>> Sent by Ubuntu LTS 16.04,
>> 谢谢,
>> Regards,
>> Riko Ho
>> /*******/
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>

-- 
*

/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/

*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170620/c2232b97/attachment.html>


More information about the yocto mailing list