[yocto] Repeteability in image compilation. How to achieve it? How to measure it?

[Daniel.]

much*

2017-02-03 13:36 GMT-02:00 Daniel. <danielhilst at gmail.com>:

> Thank you so mutch Clemens!!!! I'll take a look!!
>
> Regards,
>
> 2017-02-03 11:31 GMT-02:00 Clemens Lang <Clemens.Lang at bmw-carit.de>:
>
>> Hi,
>>
>> > On 3 Feb 2017, at 14:11, Daniel. <danielhilst at gmail.com> wrote:
>> >
>> > Hi everybody,
>> >
>> > How can I be sure that the same image built by distinct building hosts
>> > are trully identical?? Is it possible to measure that?
>>
>> I can recommend tooling offered by the reproducible builds project.
>> Especially diffoscope can be very helpful in this. See
>> https://reproducible-builds.org/tools/. You may want to start comparing
>> individual packages first, before you tackle image creation, though.
>>
>> HTH,
>> Clemens
>> --
>> Clemens Lang • Development Specialist
>> BMW Car IT GmbH • Lise-Meitner-Str. 14 • 89081 Ulm • http://bmw-carit.com
>> -------------------------------------------------------------------------
>> BMW Car IT GmbH
>> Geschäftsführer: Michael Würtenberger und Alexis Trolin
>> Sitz und Registergericht: München HRB 134810
>> -------------------------------------------------------------------------
>>
>>
>
>
> --
> *"Do or do not. There is no try"*
>   *Yoda Master*
>



-- 
*"Do or do not. There is no try"*
  *Yoda Master*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170203/e071045e/attachment.html>