[yocto] Morty Branch: Error in building core-image-sato | matchbox-panel recipe

[Gunasekaran Srinivasan]

Ross,

Fresh build also didn't solve the issue. Is there anything I could try?

Thanks,
Guna

On Fri, Dec 8, 2017 at 4:20 PM, Gunasekaran Srinivasan <
gunasekaran at solitontech.com> wrote:

> Ross,
>
> Oh!
> I tried adding DISTRO_FEATURE, still the same issue. I will clean the
> build and run once I again.
>
> Thanks,
> Guna
>
> On Fri, Dec 8, 2017 at 4:17 PM, Burton, Ross <ross.burton at intel.com>
> wrote:
>
>> core-image-sato will refuse to build long before matchbox-desktop if x11
>> is disabled.
>>
>> Ross
>>
>> On 8 December 2017 at 10:46, Gunasekaran Srinivasan <
>> gunasekaran at solitontech.com> wrote:
>>
>>> I will check that. Shouldn't core-image-sato recipecome with x11
>>> enabled?
>>>
>>> Thanks,
>>> Guna
>>>
>>> On Fri, Dec 8, 2017 at 4:11 PM, Burton, Ross <ross.burton at intel.com>
>>> wrote:
>>>
>>>> I'm surprised it go that far as libx11 should have refused to build if
>>>> X was disabled.  To enable X:
>>>>
>>>> DISTRO_FEATURES_append = " x11"
>>>>
>>>> Ross
>>>>
>>>> On 8 December 2017 at 10:40, Gunasekaran Srinivasan <
>>>> gunasekaran at solitontech.com> wrote:
>>>>
>>>>> No. I haven't. If it's disabled by default. Can you tell how to enable
>>>>> in conf/local.conf file?
>>>>>
>>>>> Thanks,
>>>>> Guna
>>>>>
>>>>> On Fri, Dec 8, 2017 at 3:54 PM, Burton, Ross <ross.burton at intel.com>
>>>>> wrote:
>>>>>
>>>>>> gdk-x11 is part of the gtk+3 recipe, which is a dependency of
>>>>>> matchbox-desktop.  matchbox-desktop needs X11, so has your BSP disabled X11?
>>>>>>
>>>>>> Ross
>>>>>>
>>>>>> On 8 December 2017 at 03:02, Gunasekaran Srinivasan <
>>>>>> gunasekaran at solitontech.com> wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I am trying to build core-image-sato image with poky 2.2.2. I am
>>>>>>> getting following error in matchbox-panel recipe
>>>>>>>
>>>>>>> ............................................................
>>>>>>> ......................................................
>>>>>>>  checking what language compliance flags to pass to the C compiler...
>>>>>>> | checking for arm-poky-linux-gnueabi-pkg-config... no
>>>>>>> | checking for pkg-config... </path/>fsl-community-bsp/matc
>>>>>>> hbox/tmp/sysroots/x86_64-linux/usr/bin/pkg-config
>>>>>>> | checking pkg-config is at least version 0.9.0... yes
>>>>>>> | checking for MATCHBOX_PANEL... no
>>>>>>> | configure: error: Package requirements (glib-2.0
>>>>>>> |                   gmodule-export-2.0
>>>>>>> |                   x11
>>>>>>> |                   gdk-x11-3.0
>>>>>>> |                   gtk+-3.0) were not met:
>>>>>>> |
>>>>>>> | No package 'gdk-x11-3.0' found
>>>>>>> |
>>>>>>> | Consider adjusting the PKG_CONFIG_PATH environment variable if you
>>>>>>> | installed software in a non-standard prefix.
>>>>>>> |
>>>>>>> | Alternatively, you may set the environment variables
>>>>>>> MATCHBOX_PANEL_CFLAGS
>>>>>>> | and MATCHBOX_PANEL_LIBS to avoid the need to call pkg-config.
>>>>>>> | See the pkg-config man page for more details.
>>>>>>> | WARNING: exit code 1 from a shell command.
>>>>>>> | ERROR: Function failed: do_configure (log file is located at
>>>>>>> <path>/fsl-community-bsp/matchbox/tmp/work/cortexa9hf-neon-p
>>>>>>> oky-linux-gnueabi/matchbox-panel-2/2.11-r0/temp/log.do_confi
>>>>>>> gure.27179)
>>>>>>> ERROR: Task (<path>/fsl-community-bsp/sour
>>>>>>> ces/poky/meta/recipes-sato/matchbox-panel-2/matchbox-panel-2
>>>>>>> _2.11.bb:do_configure) failed with exit code '1'
>>>>>>> NOTE: Tasks Summary: Attempted 2607 tasks of which 0 didn't need to
>>>>>>> be rerun and 1 failed.
>>>>>>>
>>>>>>> Summary: 1 task failed:
>>>>>>>   <path>/fsl-community-bsp/sources/poky/meta/recipes-sato/matc
>>>>>>> hbox-panel-2/matchbox-panel-2_2.11.bb:do_configure
>>>>>>>
>>>>>>> Is there a recipe for gdk-x11 in yocto?
>>>>>>>
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Guna
>>>>>>>
>>>>>>> --
>>>>>>> _______________________________________________
>>>>>>> yocto mailing list
>>>>>>> yocto at yoctoproject.org
>>>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20171208/1f13ac85/attachment.html>