[yocto] bitbake error ?

[Burton, Ross]

For some reason, bitbake can't do "wget https://www.example.com/".   Try
running that command outside of bitbake and seeing if it returns any errors.

Ross

On 9 August 2017 at 09:29, Riko <antonius.riko at gmail.com> wrote:

> Dear Yocto Member,
>
>
> I have downloaded fresh install of yocto but got error, here's the trace :
>
> bianchi at bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git://
> git.yoctoproject.org/poky.git
> Cloning into 'poky'...
> remote: Counting objects: 373183, done.
> remote: Compressing objects: 100% (89366/89366), done.
> remote: Total 373183 (delta 277418), reused 373031 (delta 277266)
> Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done.
> Resolving deltas: 100% (277418/277418), done.
> Checking connectivity... done.
>
>
> bianchi at bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source
> oe-init-build-env
> You had no conf/local.conf file. This configuration file has therefore been
> created for you with some default values. You may wish to edit it to, for
> example, select a different MACHINE (target hardware). See conf/local.conf
> for more information as common configuration options are commented.
>
> You had no conf/bblayers.conf file. This configuration file has therefore
> been
> created for you with some default values. To add additional metadata layers
> into your configuration please add entries to conf/bblayers.conf.
>
> The Yocto Project has extensive documentation about OE including a
> reference
> manual which can be found at:
>     http://yoctoproject.org/documentation
>
> For more information about OpenEmbedded see their website:
>     http://www.openembedded.org/
>
>
> ### Shell environment set up for builds. ###
>
> You can now run 'bitbake <target>'
>
> Common targets are:
>     core-image-minimal
>     core-image-sato
>     meta-toolchain
>     meta-ide-support
>
> You can also run generated qemu images with a command like 'runqemu
> qemux86'
> bianchi at bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake
> core-image-minimal
> ERROR:  OE-core's config sanity checker detected a potential
> misconfiguration.
>     Either fix the cause of this error or at your own risk disable the
> checker (see sanity.conf).
>     Following is the list of potential problems / advisories:
>
>     Fetcher failure for URL: 'https://www.example.com/'. URL
> https://www.example.com/ doesn't work.
>     Please ensure your host's network is configured correctly,
>     or set BB_NO_NETWORK = "1" to disable network access if
>     all required sources are on local disk.
>
>
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
> Any suggestions ?
>
> I'm using ubuntu 16.04,
>
> Thanks
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170809/77228117/attachment.html>