[yocto] [meta-raspberrypi][PATCH] rpi-config: waveshare screen support
Andrei Gherzan
andrei at gherzan.ro
Mon Apr 3 06:39:41 PDT 2017
On Fri, Mar 24, 2017 at 01:49:16PM -0400, Trevor Woerner wrote:
> Add support for the Waveshare 1024x600 "C" Rev2.1 7" IPS Capacitive Touch
> Screen LCD with HDMI interface:
>
> http://www.waveshare.com/7inch-HDMI-LCD-C.htm
> http://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
>
> This product works "out of the box" with the Raspberry Pi. Simply connect
> the provided HDMI and USB cables between the two devices. The touch<=>mouse
> integration works automatically.
>
> Tested with a Raspberry Pi 3, with a 32-bit raspberrypi3 build.
>
> Signed-off-by: Trevor Woerner <twoerner at gmail.com>
> ---
> README | 13 ++++++++++---
> recipes-bsp/bootfiles/rpi-config_git.bb | 10 ++++++++++
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/README b/README
> index 65a1e5f..c58bc99 100644
> --- a/README
> +++ b/README
> @@ -29,7 +29,8 @@ Contents:
> 3.L. Enable SPI bus
> 3.M. Enable I2C
> 3.N. Enable PiTFT support
> - 3.O. Enable UART support
> + 3.O. Misc. display
> + 3.P. Enable UART support
> 4. Extra apps
> 4.A. omxplayer
> 5. Board Configuration
> @@ -241,9 +242,15 @@ List of currently supported models:
> - pitft22
> - pitft28r
>
> -3.O. Enable UART
> -===============
> +3.O. Misc. display
> +==================
> +If you would like to use the Waveshare "C" 1024×600, 7 inch Capacitive Touch
> +Screen LCD, HDMI interface (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
> +Rev 2.1, please set the following in your local.conf
> +WAVESHARE_1024X600_C_2.1 = "1"
>
> +3.P. Enable UART
> +===============
> RaspberryPi 1, 2 and CM will have UART console enabled by default.
>
> RaspberryPi 3 does not have the UART enabled by default because this needs a
> diff --git a/recipes-bsp/bootfiles/rpi-config_git.bb b/recipes-bsp/bootfiles/rpi-config_git.bb
> index 20ec343..8adc938 100644
> --- a/recipes-bsp/bootfiles/rpi-config_git.bb
> +++ b/recipes-bsp/bootfiles/rpi-config_git.bb
> @@ -110,6 +110,16 @@ do_deploy() {
> echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> echo "dtoverlay=vc4-kms-v3d,${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> fi
> +
> + # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
> + if [ "${WAVESHARE_1024X600_C_2.1}" = "1" ]; then
> + echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + echo "max_usb_current=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + echo "hdmi_group=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + echo "hdmi_mode=87" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
> + fi
> }
>
> do_deploy_append_raspberrypi3-64() {
> --
> 2.12.0.rc1.48.g076c053
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
Merged to master.
--
Andrei Gherzan
gpg: rsa4096/D4D94F67AD0E9640 | t: @agherzan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20170403/36a79cd3/attachment.pgp>
More information about the yocto
mailing list