[yocto] Question: xxxx listed in PACKAGES multiple times, this leads to packaging errors
Dinh Nguyen (dinhn)
dinhn at cisco.com
Wed Oct 5 10:43:55 PDT 2016
>> Is that doing a compile in the install target?
Yes Len. Compile was done and there is no issue there.
Thanks,
—Dinh
On 10/5/16, 9:28 AM, "Lennart Sorensen" <lsorense at csclub.uwaterloo.ca> wrote:
>On Wed, Oct 05, 2016 at 04:10:01PM +0000, Dinh Nguyen (dinhn) wrote:
>> >>> I wonder why do we want to override default PACKAGES here. If we can leave that alone things would work out on its own.
>>
>> I did remove the PACKAGES setting in my .bb — so all default packages were built. But still having some other issue as stated in other emails.
>>
>> Thanks Khem.
>> —Dinh
>>
>>
>>
>> On 10/5/16, 8:34 AM, "Khem Raj" <raj.khem at gmail.com> wrote:
>>
>> >I wonder why do we want to override default PACKAGES here. If we can leave
>> >that alone things would work out on its own.
>> >
>> >On Tue, Oct 4, 2016 at 11:55 PM, Paul Eggleton
>> ><paul.eggleton at linux.intel.com> wrote:
>> >> On Wed, 05 Oct 2016 05:12:27 Dinh Nguyen wrote:
>> >>> Thanks much Paul.
>> >>>
>> >>> >>>> PACKAGES = "${PN}" should work
>> >>>
>> >>> It solved the early error “ c-mlib listed in PACKAGES multiple times, this
>> >>> leads to packaging errors” — Thanks again.
>> >>>
>> >>>
>> >>> But running into other issue. Below is my do_install
>> >>>
>> >>> do_install () {
>> >>> oe_runmake all
>
>Is that doing a compile in the install target?
>
>--
>Len Sorensen
More information about the yocto
mailing list