[yocto] [meta-raspberrypi][PATCH 1/1] Modify raspberrypi3.conf and add raspberrypi3-64.conf

[Herve Jourdain]

Hi Khem,

FYI, I am sending a slightly modified version (cortexa53hf-32 instead of
cortexa53-32 for raspberrypi3.conf).
They still depend on modifications in oe-core (heavier this time than
before), also posted to the list.

Herve

-----Original Message-----
From: Khem Raj [mailto:raj.khem at gmail.com] 
Sent: samedi 19 novembre 2016 19:19
To: Herve Jourdain <herve.jourdain at neuf.fr>; yocto at yoctoproject.org
Subject: Re: [yocto] [meta-raspberrypi][PATCH 1/1] Modify raspberrypi3.conf
and add raspberrypi3-64.conf

Nevermind, I managed to apply it, there are some CR changes I guess which
was freaking git

On 11/19/16 5:03 AM, Herve Jourdain wrote:
> Signed-off-by: Herve Jourdain <herve.jourdain at neuf.fr>
> ---
>  conf/machine/raspberrypi3-64.conf | 19 +++++++++++++++++++
>  conf/machine/raspberrypi3.conf    |  8 ++++++--
>  2 files changed, 25 insertions(+), 2 deletions(-)  create mode 100644 
> conf/machine/raspberrypi3-64.conf
> 
> diff --git a/conf/machine/raspberrypi3-64.conf 
> b/conf/machine/raspberrypi3-64.conf
> new file mode 100644
> index 0000000..a5ceddb
> --- /dev/null
> +++ b/conf/machine/raspberrypi3-64.conf
> @@ -0,0 +1,19 @@
> +#@TYPE: Machine
> +#@NAME: RaspberryPi 3 Development Board
> +#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits 
> +mode
> +
> +DEFAULTTUNE ?= "cortexa53-64"
> +
> +MACHINEOVERRIDES = "raspberrypi3:raspberrypi:${MACHINE}"
> +
> +MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
> +
> +PREFERRED_VERSION_linux-raspberrypi_raspberrypi3-64 ?= "4.7.%"
> +
> +require conf/machine/include/tune-cortexa53.inc
> +include conf/machine/include/rpi-base.inc
> +
> +SERIAL_CONSOLE = "115200 ttyS0"
> +VC4_CMA_SIZE ?= "cma-256"
> +
> +UBOOT_MACHINE = "rpi_3_config"
> diff --git a/conf/machine/raspberrypi3.conf 
> b/conf/machine/raspberrypi3.conf index 9820209..f142323 100644
> --- a/conf/machine/raspberrypi3.conf
> +++ b/conf/machine/raspberrypi3.conf
> @@ -2,12 +2,16 @@
>  #@NAME: RaspberryPi 3 Development Board
>  #@DESCRIPTION: Machine configuration for the RaspberryPi 3
>  
> -MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
> +DEFAULTTUNE ?= "cortexa53-32"
> +
> +MACHINEOVERRIDES = "raspberrypi2:raspberrypi:${MACHINE}"
>  
>  MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
>  
> -include conf/machine/raspberrypi2.conf
> +require conf/machine/include/tune-cortexa53.inc
> +include conf/machine/include/rpi-base.inc
>  
>  SERIAL_CONSOLE = "115200 ttyS0"
>  VC4_CMA_SIZE ?= "cma-256"
>  
> +UBOOT_MACHINE = "rpi_3_config"
>