[yocto] Formulating Recipe for out-of-tree kernel module

[Esponde, Joel]

Ok! I better understand your need now.
The fix solves the case where an out of tree module is dependent of a kernel module which is not built as a built-in module.

Just in case, did you have a look on these links?
http://stackoverflow.com/a/33718934/1729117
https://www.kernel.org/doc/Documentation/kbuild/modules.txt (Chapter 6.2 and 6.3)

Joël Esponde
Honeywell | Sensing and Productivity Solutions

De : Chris Trobridge [mailto:christrobridge at hotmail.com]
Envoyé : mardi 10 mai 2016 13:28
À : Esponde, Joel; yocto at yoctoproject.org
Objet : RE: [yocto] Formulating Recipe for out-of-tree kernel module

Thanks Joel,

I am on Krogoth.

My reading of that patch is that it allows out-of-tree modules to depend on symbols from the kernel but I don't see how it would help with depending on another out-of-tree module?  Those symbols are not added to the kernel Module.symvers.

I've been following some other usage I read that 'out-of-tree' means compiling outside/after the kernel build, which may not be 100% accurate?

Anyway, it suggests to me that copying the first module's Module.symvers to the shared kernel staging area and then referencing that from the second module is probably better than my current solution, provided I don't break any conventions on using the staging area.

Cheers,
Chris
________________________________
From: Joel.Esponde at Honeywell.com<mailto:Joel.Esponde at Honeywell.com>
To: christrobridge at hotmail.com<mailto:christrobridge at hotmail.com>; yocto at yoctoproject.org<mailto:yocto at yoctoproject.org>
Subject: RE: [yocto] Formulating Recipe for out-of-tree kernel module
Date: Tue, 10 May 2016 10:06:37 +0000
Hi,

There is a bitbake issue that prevents building an out-of-tree module that is dependent of another out-of-tree module.
This issue has been fixed recently:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?h=master-next&id=a9cc27e6916e5affe8b0cc431c3e89abd7681643

This fix has been released on yocto 2.1 (krogoth).
So if you are using an older Yocto project, you will have to fix two recipes manually.

I hope this will help!

Joël Esponde
Honeywell | Sensing and Productivity Solutions

De : yocto-bounces at yoctoproject.org<mailto:yocto-bounces at yoctoproject.org> [mailto:yocto-bounces at yoctoproject.org] De la part de Chris Trobridge
Envoyé : mardi 10 mai 2016 08:59
À : yocto at yoctoproject.org<mailto:yocto at yoctoproject.org>
Objet : Re: [yocto] Formulating Recipe for out-of-tree kernel module

At the risk of answering my own question...

Splitting a driver package into a module recipe and a separate recipe for user-mode utilities works in that each recipe uses the appropriate build process and puts files in the appropriate subdirectory of /work/.

I still don't see a way to build one out-of-tree module against another.  I am interested in opinion on this.  Should I try to get these drivers built in tree?  They seem to be the only two out-of-tree drivers in the build at present.  There is also some facility to add extra modules to the dahdi linux build, although achieving this with bitbake could be challenging too.

Cheers,
Chris
________________________________
From: christrobridge at hotmail.com<mailto:christrobridge at hotmail.com>
To: yocto at yoctoproject.org<mailto:yocto at yoctoproject.org>
Date: Mon, 9 May 2016 12:15:26 +0100
Subject: [yocto] Formulating Recipe for out-of-tree kernel module
I am looking to produce a recipe for the amfeltec usb-fxs adaptor (http://amfeltec.com/products/piranha-usb-fxs-adapter/), with the intention of contributing this to the meta-telephony layer.

However, I have found a few obstacles to getting a clean recipe:

  *   The makefile produces both a kernel module and a user utility, with the latter being hard-coded to build with g++.  I can produce a recipe to produce one or other of the components but not both.  Given the structure of the build directories, should this be be achievable, or should I be spitting up the recipe in two?
  *   Dahdi header files and Modules.symvers are required.  A header file is used to deduce the version of Dahdi, Modules.symvers is required for the module build process.  Hence, requires the location of the Dahdi source/build directory.  This can be set relative to the amfeltec work directory but this feels wrong.

In more general terms my questions are:

  *   Should I split a recipe into kernel and non-kernel components?
  *   How should one out-of-tree recipe access the headers/Module.symvers from another (should that recipe be installing them in ${STAGING_KERNEL_DIR} (or somewhere else)?)

Cheers,
Chris


-- _______________________________________________ yocto mailing list yocto at yoctoproject.org<mailto:yocto at yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20160510/bad51ca4/attachment.html>