[yocto] [master] ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot:

[Christian Ege]

Hi,

with the latest master from today I ran in some trouble:

Build Configuration:
BB_VERSION        = "1.29.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "universal"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "udooneo"
DISTRO            = "poky"
DISTRO_VERSION    = "2.0+snapshot-20160316"
TUNE_FEATURES     = "arm armv7a vfp thumb neon
callconvention-hard       cortexa9"
TARGET_FPU        = "hard"
meta
meta-poky         = "HEAD:8debfea81e69d038bd2d56314b272cb74f5582ed"
meta-oe
meta-multimedia
meta-python
meta-networking   = "HEAD:35d91f32c462ad5889cb3229766d6d4ed2c80a4c"
meta-qt5          = "master-5.6:b2d5376b41625521b9a081fe800345fff33d8dd6"
meta-ruby         = "HEAD:35d91f32c462ad5889cb3229766d6d4ed2c80a4c"
meta-fsl-arm      = "HEAD:37564e6801ce82fad979b4f57151c676d80e8a6c"
meta-fsl-arm-extra = "HEAD:36a638abe1238bdc8e0ef1242dd7bfab59cc48d7"
meta-fsl-demos    = "HEAD:6b779b2cb0d231063fc035a9a0871d722366c329"
meta-udoo         = "master:1b38bcec5057b93017a00f107e0738ce64ade66f"
meta-swupdate     = "master:44516e81a494afef3be7e3f249713fdec6e6e32a"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: The recipe
gobject-introspection is trying to install files into a shared area
when those files already exist. Those files and their manifest
location are:
   /data/FSL/fsl-community-bsp-master/build/tmp/sysroots/udooneo/usr/share/gobject-introspection-1.0/Makefile.introspection
 Matched in manifest-udooneo-gtk-doc-stub.populate_sysroot
 /data/FSL/fsl-community-bsp-master/build/tmp/sysroots/udooneo/usr/share/aclocal/introspection.m4
 Matched in manifest-udooneo-gtk-doc-stub.populate_sysroot
Please verify which recipe should provide the above files.
The build has stopped as continuing in this scenario WILL break
things, if not now, possibly in the future (we've seen builds fail
several months later). If the system knew how to recover from this
automatically it would however there are several different scenarios
which can result in this and we don't know which one this is. It may
be you have switched providers of something like virtual/kernel (e.g.
from linux-yocto to linux-yocto-dev), in that case you need to execute
the clean task for both recipes and it will resolve this error. It may
be you changed DISTRO_FEATURES from systemd to udev or vice versa.
Cleaning those recipes should again resolve this error however
switching DISTRO_FEATURES on an existing build directory is not
supported, you should really clean out tmp and rebuild (reusing sstate
should be safe). It could be the overlapping files detected are
harmless in which case adding them to SSTATE_DUPWHITELIST may be the
correct solution. It could also be your build is including two
different conflicting versions of things (e.g. bluez 4 and bluez 5 and
the correct solution for that would be to resolve the conflict. If in
doubt, please ask on the mailing list, sharing the error and filelist
above.
ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: If the
above message is too much, the simpler version is you're advised to
wipe out tmp and rebuild (reusing sstate is fine). That will likely
fix things in most (but not all) cases.
ERROR: gobject-introspection-1.46.0-r0 do_populate_sysroot: Function
failed: sstate_task_postfunc
ERROR: Logfile of failure stored in:
/data/FSL/fsl-community-bsp-master/build/tmp/work/cortexa9hf-neon-poky-linux-gnueabi/gobject-introspection/1.46.0-r0/temp/log.do_populate_sysroot.16494
ERROR: Task 1802
(/data/FSL/fsl-community-bsp-master/sources/poky/meta/recipes-gnome/gobject-introspection/gobject-introspection_1.46.0.bb,
do_populate_sysroot) failed with exit code '1'
NOTE: Tasks Summary: Attempted 4772 tasks of which 4742 didn't need to
be rerun and 1 failed.
No currently running tasks (4772 of 5254)


Any help is appreciated.

Best,
Christian

-- 
http://ch.ege.io/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.do_populate_sysroot.16494
Type: application/octet-stream
Size: 3917 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20160316/4d1fbf4f/attachment.obj>