[yocto] Yocto 2.1 powerpc64 e6500 - postinstall intercept hook problems
akuster
akuster at mvista.com
Wed Jun 15 12:52:04 PDT 2016
On 06/15/2016 12:23 PM, Khem Raj wrote:
>
>> On Jun 15, 2016, at 1:27 AM, Anicic Damir (PSI) <damir.anicic at psi.ch> wrote:
>>
>> Hi !
>>
>> I am trying to build Yocto 2.1 for PowerPC64, e6500 CPU.
>>
>> I managed to build, with warnings that some steps will be postponed to first boot,
>> but if I add "read-only-rootfs" then warnings change to errors.
>>
>> The problem seems to be missing qemu-ppc64, see down "exit code: 127".
>> qemu-* executables ( tmp/sysroots/x86_64-linux/usr/bin/qemu-* ) are built, but qemu-ppc64 is missing.
>>
>> If I build qemu-ppc64 (qemu 2.6) myself (install it to /usr/local/bin which is in PATH),
>> then I get "Invalid instruction" from my qemu-ppc64.
>>
>>
>> My build (core-image-psi-gfa-cmd is basically core-image-full-cmdline ):
>>
>> Build Configuration:
>> BB_VERSION = "1.30.0"
>> BUILD_SYS = "x86_64-linux"
>> NATIVELSBSTRING = "ScientificLinux-6.4"
>> TARGET_SYS = "powerpc64-poky-linux"
>> MACHINE = "powerpc64-ppc64e6500"
>> DISTRO = "gfa-ppc64e6500"
>> DISTRO_VERSION = "2.1"
>> TUNE_FEATURES = "m64 fpu-hard e6500 altivec"
>> TARGET_FPU = ""
>> meta
>> meta-poky
>> meta-yocto-bsp
>> meta-gfa = "krogoth-gfa-v2:898a78357e72fb80f1f8e26ba90bad5b7b054a4f"
>>
>> NOTE: Preparing RunQueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> WARNING: core-image-psi-gfa-cmd-1.0-r0 do_rootfs: The postinstall intercept hook 'update_gio_module_cache' failed (exit code: 127)! See log for details!
>> WARNING: core-image-psi-gfa-cmd-1.0-r0 do_rootfs: The postinstalls for the following packages will be postponed for first boot: libglib-2.0-0
>> WARNING: core-image-psi-gfa-cmd-1.0-r0 do_rootfs: [log_check] core-image-psi-gfa-cmd: found a warning message in the logfile (keyword 'WARNING:'):
>> [log_check] WARNING: The postinstall intercept hook 'update_gio_module_cache' failed (exit code: 127)! See log for details!
>>
>> WARNING: core-image-psi-gfa-cmd-1.0-r0 do_rootfs: [log_check] core-image-psi-gfa-cmd: found a warning message in the logfile (keyword 'WARNING:'):
>> [log_check] WARNING: The postinstalls for the following packages will be postponed for first boot: libglib-2
>>
>>
>> If I build core-image-psi-gfa-cmd ( which is basicaly core-image-lsb-sdk ),
>> then there are few more postinstall problems, too:
>> The postinstalls for the following packages will be postponed for first boot:
>> libgdk-pixbuf-2.0-loader-ico libgdk-pixbuf-2.0-loader-bmp libgdk-pixbuf-2.0-loader-jpeg
>> libgdk-pixbuf-2.0-loader-png libgdk-pixbuf-2.0-loader-gif libgdk-pixbuf-2.0-loader-xpm libgdk-pixbuf-2.0-loader-ani
>>
>> all with the same qemu-ppc64 problem.
There is no official qemuppc64 on OE. I do have it in my own bsp layer.
I will be submitting patches soon.
- armin
>
>
> we do not have qemuppc64 working correctly in all cases. We now depend on Qemu to do some compile tasks which are not easily cross compilable. Those will fail.
>
>>
>>
>> I have additionally eudev postinstall problem (generating hwdb.bin) -probably also qemu related
>>
>>
>> Please help.
>>
>> Kind regards,
>>
>> Damir
>>
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
>> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto>
>
>
>
More information about the yocto
mailing list