[yocto] gcc-6.1 and raspi
Trevor Woerner
twoerner at gmail.com
Sun Jun 5 16:36:20 PDT 2016
On Mon 2016-06-06 @ 05:38:00 AM, Herve Jourdain wrote:
> Hi,
>
> This one is a different issue, that was caused by a patch in oe 1 week ago.
> I did send a patch to solve it last wednesday, I believe.
> The root cause is KERNEL_OUTPUT has been removed from kernel.bbclass, but meta-raspberrypi uses it.
> This is the link to the patch:
> http://article.gmane.org/gmane.linux.embedded.yocto.general/30093/
Thanks, the patch works great :-)
>
> Herve
>
> > On 6 juin 2016, at 04:08, Trevor Woerner <twoerner at gmail.com> wrote:
> >
> >> On Sun 2016-06-05 @ 04:55:47 PM, Herve Jourdain wrote:
> >> It seems like you are building the 4.1.21 kernel.
> >> Did you set PREFERRED_VERSION_linux-raspberrypi = "4.4.%" in your
> >> distro.conf or local.conf?
> >
> > I was trying to save myself the time required to rebuild with the 4.4 kernel.
> > I knew from my experiments that the result was the same for both, but here it
> > is anyway:
> >
> > ERROR: linux-raspberrypi-1_4.4.9+gitAUTOINC+3b440738b5-r0 do_rpiboot_mkimage: Function failed: do_rpiboot_mkimage
> > Log data follows:
> > | DEBUG: Executing shell function do_rpiboot_mkimage
> > | Usage: mkknlimg [--dtok] [--283x] <vmlinux|zImage|bzImage> <outfile>
> > | WARNING: /z/layerindex-master/raspi2/tmp/work/raspberrypi2-poky-linux-gnueabi/linux-raspberrypi/1_4.4.9+gitAUTOINC+3b440738b5-r0/temp/run.do_rpiboot_mkimage.18615:1 exit 1 from '/z/layerindex-master/raspi2/tmp/sysroots/x86_64-linux/usr/bin/mkknlimg --dtok ${KERNEL_OUTPUT} ${KERNEL_OUTPUT}'
> > | ERROR: Function failed: do_rpiboot_mkimage (log file is located at /z/layerindex-master/raspi2/tmp/work/raspberrypi2-poky-linux-gnueabi/linux-raspberrypi/1_4.4.9+gitAUTOINC+3b440738b5-r0/temp/log.do_rpiboot_mkimage.18615)
More information about the yocto
mailing list