[yocto] ***SPAM*** Re: gcc-6.1 and raspi

[Herve Jourdain]

Hi,

It seems like you are building the 4.1.21 kernel.
Did you set PREFERRED_VERSION_linux-raspberrypi = "4.4.%" in your
distro.conf or local.conf?

Herve

-----Original Message-----
From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
On Behalf Of Trevor Woerner
Sent: dimanche 5 juin 2016 14:58
To: 'Yocto Project' <yocto at yoctoproject.org>
Subject: ***SPAM*** Re: [yocto] gcc-6.1 and raspi

On Sun 2016-06-05 @ 02:14:29 PM, Herve Jourdain wrote:
> I'm using kernel 4.4, and it does build properly with gcc 6.1.
> But the build does fail on other packages later on, so I ended up 
> reverting to 5.3 for now.

Both the official meta-raspberrypi and Khem Raj's meta-raspberrypi layers
have recipes for the 4.4% kernel. I tried them but I keep getting:

	ERROR: linux-raspberrypi-1_4.1.21+gitAUTOINC+ff45bc0e89-r0
do_rpiboot_mkimage: Function failed: do_rpiboot_mkimage
	Log data follows:
	| DEBUG: Executing shell function do_rpiboot_mkimage
	| Usage: mkknlimg [--dtok] [--283x] <vmlinux|zImage|bzImage>
<outfile>
	| WARNING:
/z/layerindex-master/raspi2/tmp/work/raspberrypi2-poky-linux-gnueabi/linux-r
aspberrypi/1_4.1.21+gitAUTOINC+ff45bc0e89-r0/temp/run.do_rpiboot_mkimage.125
4:1 exit 1 from
'/z/layerindex-master/raspi2/tmp/sysroots/x86_64-linux/usr/bin/mkknlimg
--dtok ${KERNEL_OUTPUT} ${KERNEL_OUTPUT}'
	| ERROR: Function failed: do_rpiboot_mkimage (log file is located at
/z/layerindex-master/raspi2/tmp/work/raspberrypi2-poky-linux-gnueabi/linux-r
aspberrypi/1_4.1.21+gitAUTOINC+ff45bc0e89-r0/temp/log.do_rpiboot_mkimage.125
4)

So I'm not sure what's going on there.
--
_______________________________________________
yocto mailing list
yocto at yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto