[yocto] [genericx86-jethro] core-image-sato - VFS: Cannot open root device "PARTUUID=8316.." or unknown-block(0, 0): error -6
Khem Raj
raj.khem at gmail.com
Sat Jul 23 09:07:07 PDT 2016
On Sat, Jul 23, 2016 at 8:57 AM, Simon Bolek <simon.bolek at googlemail.com> wrote:
> Hi,
>
> Well it is, as far as what
> parted /dev/sda print
> says.
>
> generated grub.cfg matches that with PARTUUID, so it looks fine.
>
> menuentry "Linux" {
> search --no-floppy --fs-uuid e88ec2c7-3438-4fe3-9033-83eb81957875 --set
> root
> linux /vmlinuz root=PARTUUID=8316255c-f839-43fa-b2c6-d83bbed80962 rw
> quiet
this seems ok to me.
>
> }
>
> However fdisks -l shows only /dev/sda1, which ist strange.
>
> Is there something wrong with install.sh script?
> Compared to FIDO, it is GPT, not MSDOS. But i did not touch anything there.
> Maybe you can take a look at it?
> http://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-core/initrdscripts/files/init-install.sh?h=jethro
> It always checks the grub version, however in FIDO Grub was also 2.00, so I
> do not get the IFs.
>
> thank you!
> Simon :-)
>
>
> On Sat, Jul 23, 2016 at 4:52 PM, Khem Raj <raj.khem at gmail.com> wrote:
>>
>>
>> > On Jul 23, 2016, at 5:25 AM, Simon Bolek <simon.bolek at googlemail.com>
>> > wrote:
>> >
>> > Hello!
>> >
>> > I am trying to install genericx86 core-image-sato on a atom-pc device
>> > with 80GB Intel SSD drive.
>> > I have created an image with
>> > bitbake core-image-sato
>> > without changing anything in the kernel via menuconfig, etc.
>> >
>> > ps. after installation I had to set /dev/sda1 to bootable with disk
>>
>> it seems your rootfs is on /dev/sda3 can you check kernel parameters what
>> is it passing for root=
>>
>> >
>> > After installation I have got this ugly error while booting the device.
>> > PLEASE HELP ME!
>> >
>> >
>> > "...
>> > VFS: Cannot open root device "PARTUUID=8316.." or unknown-block(0,0):
>> > error -6
>> > Pease append a correct "root=" boot option; here are the available
>> > partitions:
>> > 0100 4096 ram0 (driver?)
>> > ...
>> > 010f 4096 ram15 (driver?)
>> > ..."
>> >
>> >
>> > I noticed that install.sh script is creating GPT
>> > parted ${device} mktable gpt
>> > not MSDOS as in previous yocto versions, e.g. fido.
>> >
>> > Any hint is more than welcome. The device will just not boot :((((
>> >
>> > Here are some details about the device:
>> >
>> >
>> > +++
>> > blkid says:
>> > /dev/sda2: UUID="e88ec2c7-3438-4fe3-9033-83eb81957875" TYPE="ext3"
>> > PARTLABEL="boot" PARTUUID="57f43ab0-6e30-4721-81e2-c565f6c184c8"
>> > /dev/sda3: UUID="cbb77742-c9fe-4f19-85d7-399af99c3aa8" TYPE="ext3"
>> > PARTLABEL="root" PARTUUID="8316255c-f839-43fa-b2c6-d83bbed80962"
>> > /dev/sda4: TYPE="swap" PARTLABEL="swap"
>> > PARTUUID="15ddbd73-15b3-40a8-97e7-6377048a79eb"
>> > /dev/sdb: SEC_TYPE="msdos" LABEL="boot" UUID="3C80-C1D7" TYPE="vfat"
>> > /dev/sda1: PARTLABEL="bios_boot"
>> > PARTUUID="11cf26d2-2333-4c5b-a876-59d65929085f"
>> >
>> > +++
>> > /etc/fstab says
>> > # stock fstab - you probably want to override this with a machine
>> > specific one
>> >
>> > /dev/root / auto defaults
>> > 1 1
>> > proc /proc proc defaults
>> > 0 0
>> > devpts /dev/pts devpts mode=0620,gid=5
>> > 0 0
>> > tmpfs /run tmpfs
>> > mode=0755,nodev,nosuid,strictatime 0 0
>> > tmpfs /var/volatile tmpfs defaults
>> > 0 0
>> >
>> > # uncomment this if your device has a SD/MMC/Transflash slot
>> > #/dev/mmcblk0p1 /media/card auto
>> > defaults,sync,noauto 0 0
>> >
>> > /dev/sda2 / ext3 rw
>> > 0 1
>> > /dev/disk/by-partuuid/15ddbd73-15b3-40a8-97e7-6377048a79eb
>> > swap swap defaults 0 0
>> > UUID=e88ec2c7-3438-4fe3-9033-83eb81957875 /boot
>> > ext3 defaults 1 2
>> >
>> >
>> > +++
>> > fdisk -l says
>> > Disk /dev/sda: 80.0 GB, 80026361856 bytes
>> > 255 heads, 63 sectors/track, 9729 cylinders
>> > Units = cylinders of 16065 * 512 = 8225280 bytes
>> >
>> > Device Boot Start End Blocks Id System
>> > /dev/sda1 * 1 9730 78150743+ ee EFI GPT
>> >
>> > +++
>> > parted /dev/sda says
>> > Model: ATA INTEL SSDSA2M080 (scsi)
>> > Disk /dev/sda: 80.0GB
>> > Sector size (logical/physical): 512B/512B
>> > Partition Table: gpt
>> > Disk Flags: pmbr_boot
>> >
>> > Number Start End Size File system Name Flags
>> > 1 1049kB 2097kB 1049kB bios_boot bios_grub
>> > 2 2097kB 19.9MB 17.8MB ext3 boot
>> > 3 22.0MB 76.0GB 76.0GB ext3 root
>> > 4 76.0GB 80.0GB 4001MB linux-swap(v1) swap
>> >
>> > +++
>> > lspci says
>> > Device: 00:1f.2
>> > Class: IDE interface
>> > Vendor: Intel Corporation
>> > Device: NM10/ICH7 Family SATA Controller [IDE mode]
>> > SVendor: Intel Corporation
>> > SDevice: Device 464c
>> > Rev: 01
>> > ProgIf: 8a
>> > Driver: ata_piix
>> > Module: ata_piix
>> >
>> >
>> > thank you
>> > Simon :-)
>> >
>> >
>> >
>>
>
More information about the yocto
mailing list