[yocto] How to build jffs2 rootfs image in freescale community build

[Khem Raj]

you need to run -c deploy task for that

On Wed, Jan 13, 2016 at 9:48 AM, Sarayu Krishna Sivanandam
<sarayu at zaikenn.com> wrote:
> hi ,
>
> I do see the the linux-dtb.inc included in the linux-ls1 recipe but when i
> build the code using
>
> bitbake -c compile -f linux-ls1 it doesnot re-generate the dtb file in the
> deploy/images/ls1021atwr folder .
>
> Also when i try to rebuild the images like core-image-minimal or core-image
> base it does not rebuild any of the images .
>
> How can i force it to rebuild the dtb image ?
>
> Thanks and Regards,
> Sarayu K S
> Tech Lead
> Zaikenn Technologies
>
> On Wed, Jan 13, 2016 at 11:11 PM, Khem Raj <raj.khem at gmail.com> wrote:
>>
>>
>> On Jan 13, 2016, at 4:03 AM, Sarayu Krishna Sivanandam
>> <sarayu at zaikenn.com> wrote:
>>
>> hi ,
>>
>> On similar lines i want to rebuild my linux dtb file as i have made some
>> changes in my dts file . How can i force it to regenerate the same ?
>>
>> For example , I use the command bitbake -c compile -f linux-ls1 to
>> regenerate the uImage .
>>
>> Is there is similar command for the linux-dtb generation ?
>>
>>
>> if your kernel recipe is including linux-dtb.inc then it should
>> automatically append device tree related activities into standard tasks.
>>
>>
>> Thanks in advance for your help.
>>
>> Thanks and Regards,
>> Sarayu K S
>> Tech Lead
>> Zaikenn Technologies
>>
>> On Tue, Jan 12, 2016 at 3:17 PM, Sarayu Krishna Sivanandam
>> <sarayu at zaikenn.com> wrote:
>>>
>>> That worked . Thanks !!
>>>
>>> Thanks and Regards,
>>> Sarayu K S
>>> Tech Lead
>>> Zaikenn Technologies
>>>
>>> On Tue, Jan 12, 2016 at 2:12 PM, Khem Raj <raj.khem at gmail.com> wrote:
>>>>
>>>> On Tue, Jan 12, 2016 at 12:32 AM, Sarayu Krishna Sivanandam
>>>> <sarayu at zaikenn.com> wrote:
>>>> > Hi all ,
>>>> >
>>>> > I was initially using the QorIQ-SDK-V1.8 SDK and was using the command
>>>> > "bitbake corre-image-full " to generate the full images including the
>>>> > uboot
>>>> > , the jffs2 filesystem etc as shown below ,
>>>> >
>>>> > -rw-r--r--. 1 sarayu sarayu 30670848 Oct 14 13:46
>>>> > fsl-image-core-ls1021atwr-20151014203509.rootfs.jffs2
>>>> >
>>>> >
>>>> > Hoe ever now i have moved to the fsl-community-bsp and want to
>>>> > generate the
>>>> > full images . I am uisng the command "bitbake core-image-full-cmdline"
>>>> > as
>>>> > the "core-image-full " command was not available . But it still did
>>>> > not
>>>> > generate the individual filesystem types . It generated a filesystem
>>>> > file
>>>> > like the below .
>>>> >
>>>> > -rw-r--r--. 1 sarayu sarayu 24353214 Jan 11 23:12
>>>> > core-image-full-cmdline-ls1021atwr-20160112065953.rootfs.tar.gz
>>>> >
>>>> >
>>>> >  Can you please let me know how to generate the jffs2 image in my
>>>> > community
>>>> > bsp ? Please let me know what i am missing here .
>>>>
>>>> Add IMAGE_FSTYPES += "jffs2" in your local.conf
>>>>
>>>> >
>>>> >
>>>> > Thanks in advance for your help.
>>>> >
>>>> > Thanks and Regards,
>>>> > Sarayu K S
>>>> > Tech Lead
>>>> > Zaikenn Technologies
>>>> >
>>>> > --
>>>> > _______________________________________________
>>>> > yocto mailing list
>>>> > yocto at yoctoproject.org
>>>> > https://lists.yoctoproject.org/listinfo/yocto
>>>> >
>>>
>>>
>>
>>
>