[yocto] wic adds wrong mount lines to my fstab

[Oliver Graute]

On Wed, Feb 10, 2016 at 11:19 AM, Ed Bartosh <ed.bartosh at linux.intel.com> wrote:
> Hi Oliver,
>
> On Tue, Feb 09, 2016 at 09:29:16AM +0100, Oliver Graute wrote:
>> # It uses SPL and u-boot
>> #
>> # The disk layout used is:
>> #  - ----- --------- ---------- -------- --------- ---------- ------------
>> # | | SPL | u-boot  |  /boot1  | /boot2 | rootfs1 | rootfs2  |    data    |
>> #  - ----- --------- ---------- -------- --------- ---------- ------------
>> # ^ ^     ^         ^         ^              ^
>> # | |     |         |         |              |
>> # 0 1kiB  69kiB     4MiB   4MiB + 20MiB    4MiB + 8Mib + rootfs1 + rootfs2 + data
>> #
>> part SPL --source rawcopy --sourceparams="file=SPL" --ondisk mmcblk --no-table --align 1
>> part u-boot --source rawcopy --sourceparams="file=u-boot.img" --ondisk mmcblk --no-table --align 69
>> part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot --active --align 4096 --size 20M --extra-space 0
>> #part /boot2 --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot2 --active --align 4096 --size 8M --extra-space 0
>> part / --source rootfs --ondisk mmcblk --fstype=ext3 --label root --align 4 --size 125
>> part /rescue --source rootfs --ondisk mmcblk --fstype=ext3 --label secondary --align 4 --size 125
>> part /data --ondisk mmcblk --fstype=ext3 --label data --align 4 --size 730
>>
>> Some sugesstions to fix this?
> How exactly wic complains if you use --ondisk mmcblk0 ?
>
> It worked for me with this .wks:
> part /boot --source bootimg-pcbios --ondisk mmcblk0 --label boot --active --align 1024
> part / --source rootfs --ondisk mmcblk0 --fstype=ext3 --label root --align 1024
> part /rescue --source rootfs --ondisk mmcblk0 --fstype=ext3 --label secondary --align 4 --size 125
> part /data --ondisk mmcblk0 --fstype=ext3 --label data --align 4 --size 730
>
> bootloader --timeout=0 --append="rootwait rootfstype=ext3 console=tty0"
>
> and produced these 2 lines in fstab:
> /dev/mmcblk0p3  /rescue ext3    defaults        0       0
> /dev/mmcblk0p5  /data   ext3    defaults        0       0
>
> If you provide more info about your setup(layers used?) I can try to
> reproduce it and fix the issue.
> Creating bug in https://bugzilla.yoctoproject.org would be great too.

Hello Ed,

it is working now with --ondisk mmcblk0. I'am not sure why it didn't
worked before. I can't reproduce it anymore. Thx for your help and sorry
for the noise.

best regards,

Oliver