[yocto] [meta-raspberrypi][PATCH 3/5] rpi-config: Add UART enabler

[Andrei Gherzan]

On Thu, Apr 21, 2016 at 06:47:29PM +0100, Theodor Gherzan wrote:
> A new config.txt setting has been introduced - enable_uart - the
> purpose of which is to control the initialisation of the UART(*). The
> default value varies according to the primary UART on the platform -
> if the PL011 is the primary UART (that used for the console and boot
> messages) then enable_uart defaults to 1, and if the mini-UART is the
> primary then it defaults to 0.
>

Got it now. So people with rpi3 will need to set this to get serial
enabled but rpi1-2 will get it by default. Can you please add a summary
in README too?

--
Andrei Gherzan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20160421/7698e43f/attachment.pgp>