[yocto] how to deploy gdbserver ?
Valentin Le bescond
valentin.lebescond at gmail.com
Thu Oct 15 08:38:50 PDT 2015
Good point.
But so far my experience with yocto forced me to go back and forth the 1.6
1.7 and 1.8 branches depending on the layers.
So I kind of stopped where it worked... without worrying about gdb that's
true.
I won't go updating everything for testing purpose right now so I'll leave
it like that
Thanks !
Le jeu. 15 oct. 2015 à 17:31, Gary Thomas <gary at mlbassoc.com> a écrit :
> On 2015-10-15 09:16, Valentin Le bescond wrote:
> > sure !
> >
> > something like this ?
> >
> > Build Configuration:
> > BB_VERSION = "1.24.0"
> > BUILD_SYS = "x86_64-linux"
> > NATIVELSBSTRING = "Fedora-22"
> > TARGET_SYS = "arm-poky-linux-gnueabi"
> > MACHINE = "raspberrypi"
> > DISTRO = "poky"
> > DISTRO_VERSION = "1.7.2"
> > TUNE_FEATURES = "arm armv6 vfp arm1176jzfs callconvention-hard"
> > TARGET_FPU = "vfp"
> > meta
> > meta-yocto
> > meta-yocto-bsp = "dizzy:85f6cf736b5ecf3af6d1596b782dae81b9ac1f11"
> > meta-raspberrypi = "fido:b896a7da70dd7a16ba7ffd664f7747cb37e1d142"
> > meta-networking
> > meta-ruby
> > meta-oe
> > meta-python = "dizzy:5b6f39ce325d490fc382d5d59c5b8b9d5fa38b38"
>
> I think you'd be better off by updating to later branches and also you
> should try
> to use corresponding branches (e.g. mixing dizzy and fido is probably a
> source
> for problems).
>
> >
> >
> >
> > Le jeu. 15 oct. 2015 à 17:10, Gary Thomas <gary at mlbassoc.com <mailto:
> gary at mlbassoc.com>> a écrit :
> >
> > On 2015-10-15 08:39, Valentin Le bescond wrote:
> > > Hello
> > >
> > > I believe tools-debug works but unfortunately I have errors
> building libaio and other stuff (it says
> "tmp/sysroots/raspberrypi/usr/include/gnu/stubs.h:10:29: fatal error:
> > > gnu/stubs-hard.h: No such file or directory")
> >
> > Can you send more details about this error (what version of Yocto
> meta-data you are using, etc)?
> > I just built this for the RaspberryPi and RaspberryPi2 using
> Poky/Yocto master (jethro) with no problems.
> >
> > >
> > > Anyway, to stick with the initial question, thanks !
> > >
> > >
> > > Le jeu. 15 oct. 2015 à 15:58, Daniel. <danielhilst at gmail.com
> <mailto:danielhilst at gmail.com> <mailto:danielhilst at gmail.com <mailto:
> danielhilst at gmail.com>>> a écrit :
> > >
> > > Works fine with emacs also.
> > >
> > > 2015-10-15 10:44 GMT-03:00 <winfried.dobbe at xmsnet.nl <mailto:
> winfried.dobbe at xmsnet.nl> <mailto:winfried.dobbe at xmsnet.nl <mailto:
> winfried.dobbe at xmsnet.nl>>>:
> > >
> > > > Hi everyone,
> > > >
> > > > I want to be able to debug my target machine
> (raspberrypi) remotely
> > > > through
> > > > qtcretor on host.
> > > >
> > > > I can't seem to find a way to deploy the gdbserver
> software though.
> > > > I built the gdb-cross-arm but don't see any gdbserver on
> the target with
> > > > hob (poky 1.7.2) ?
> > > >
> > > > What am I missing ?
> > >
> > > When I build my image with
> > >
> > > EXTRA_IMAGE_FEATURES += "tools-debug"
> > >
> > > both gdb and gdbserver are installed in the target rootfs.
> Remote
> > > debugging worked out-of-the-box with QtCreator.
> > >
> > >
> > >
> > >
> > >
> > > --
> > > _______________________________________________
> > > yocto mailing list
> > >yocto at yoctoproject.org <mailto:yocto at yoctoproject.org> <mailto:
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>>
> > >https://lists.yoctoproject.org/listinfo/yocto
> > >
> > >
> > >
> > >
> > > --
> > > /"Do or do not. There is no try"/
> > > ///*Yoda Master*/
> > > --
> > > _______________________________________________
> > > yocto mailing list
> > >yocto at yoctoproject.org <mailto:yocto at yoctoproject.org> <mailto:
> yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>>
> > >https://lists.yoctoproject.org/listinfo/yocto
> > >
> > > --
> > > Valentin LE BESCOND
> > >
> > >
> >
> > --
> > ------------------------------------------------------------
> > Gary Thomas | Consulting for the
> > MLB Associates | Embedded world
> > ------------------------------------------------------------
> > --
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> > https://lists.yoctoproject.org/listinfo/yocto
> >
> > --
> > Valentin LE BESCOND
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
--
Valentin LE BESCOND
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20151015/54b46192/attachment.html>
More information about the yocto
mailing list