[yocto] wpa_supplicant on Raspberry Pi 2B
Daniel.
danielhilst at gmail.com
Sat Oct 3 09:50:09 PDT 2015
2015-10-02 18:37 GMT-03:00 Edward Vidal <develone at sbcglobal.net>:
> Hi all,
> Still no success getting wifi working.
> Any and all help appreciated.
>
> Created a new image which installed 46 new rpms linux-firmware see below.
>
> ps -ax | grep wpa_supplicant
> 503 ? S 0:00 /usr/sbin/wpa_supplicant -u
> 704 pts/0 R+ 0:00 grep wpa_supplicant
>
Well wpa_supplicant is running here with -u option. Did you have
connman installed? What image you're using? I don't have a rasp2 so I
can only test with raspB.
Best regards,
> root at raspberrypi2:~# wpa_cli stat
> Failed to connect to non-global ctrl_ifname: (nil) error: Success
> root at raspberrypi2:~# wpa_cli stat
> Failed to connect to non-global ctrl_ifname: (nil) error: Success
>
> root at raspberrypi2:~# wpa_supplicant -ddd -B -i wlan0 -D nl80211 -c
> /etc/wpa_supplicant.conf
> wpa_supplicant v2.4
> random: Trying to read entropy from /dev/random
> Successfully initialized wpa_supplicant
> Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
> 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group='0'
> update_config=1
> Line: 5 - start of a new network block
> scan_ssid=1 (0x1)
> ssid - hexdump_ascii(len=10):
> 41 54 54 39 78 32 78 39 6a 37 ATT9x2x9j7
> PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
> proto: 0x1
> key_mgmt: 0x2
> PSK (from passphrase) - hexdump(len=32): [REMOVED]
> Priority group 0
> id=0 ssid='ATT9x2x9j7'
> rfkill: initial event: idx=0 type=1 op=0 soft=1 hard=0
> rfkill: WLAN soft blocked
> nl80211: Supported cipher 00-0f-ac:1
> nl80211: Supported cipher 00-0f-ac:5
> nl80211: Supported cipher 00-0f-ac:2
> nl80211: Supported cipher 00-0f-ac:4
> nl80211: Using driver-based off-channel TX
> nl80211: interface wlan0 in phy phy0
> nl80211: Set mode ifindex 3 iftype 2 (STATION)
> nl80211: Subscribe to mgmt frames with non-AP handle 0x5a6e68
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=06
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=0a07
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=0a11
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=1101
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=1102
> nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5a6e68
> match=0505
> nl80211: Could not yet enable interface 'wlan0' due to rfkill
> netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5
> (IF_OPER_DORMANT)
> nl80211: driver param='(null)'
> Add interface wlan0 to a new radio phy0
> nl80211: Regulatory information - country=00
> nl80211: 2402-2472 @ 40 MHz 20 mBm
> nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
> nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
> nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR)
> nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR)
> nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
> nl80211: Added 802.11b mode based on 802.11g information
> wlan0: Own MAC address: 40:a5:ef:05:4d:01
> wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0
> set_tx=0 seq_len=0 key_len=0
> nl80211: set_key failed; err=-100 Network is down)
> wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1
> set_tx=0 seq_len=0 key_len=0
> nl80211: set_key failed; err=-100 Network is down)
> wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2
> set_tx=0 seq_len=0 key_len=0
> nl80211: set_key failed; err=-100 Network is down)
> wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3
> set_tx=0 seq_len=0 key_len=0
> nl80211: set_key failed; err=-100 Network is down)
> wlan0: RSN: flushing PMKID list in the driver
> nl80211: Flush PMKIDs
> wlan0: Setting scan request: 0.100000 sec
> wlan0: WPS: UUID based on MAC address: 50fb4973-c5e3-5899-b3c0-27a64501d294
> GnuTLS: Library version 3.3.14 (runtime) - 3.3.14 (build)
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: Supplicant port status: Unauthorized
> nl80211: Skip set_supp_port(unauthorized) while not associated
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> Using existing control interface directory.
> ctrl_interface_group=0
> wlan0: Added interface wlan0
> wlan0: State: DISCONNECTED -> DISCONNECTED
> nl80211: Set wlan0 operstate 0->0 (DORMANT)
> netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5
> (IF_OPER_DORMANT)
> Daemonize..
>
> root at raspberrypi2:~# wpa_cli stat
> Selected interface 'wlan0'
> wpa_state=INTERFACE_DISABLED
> address=40:a5:ef:05:4d:01
> uuid=50fb4973-c5e3-5899-b3c0-27a64501d294
>
> root at raspberrypi2:~# ifconfig wlan0
> wlan0 Link encap:Ethernet HWaddr 40:A5:EF:05:4D:01
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> Thanks
>
> +linux-firmware-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ar3k-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ar9170-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ath6k-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ath9k-0.0+git0+3161bfa479-r0.all
> +linux-firmware-atheros-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-bcm4329-0.0+git0+3161bfa479-r0.all
> +linux-firmware-bcm4330-0.0+git0+3161bfa479-r0.all
> +linux-firmware-bcm4334-0.0+git0+3161bfa479-r0.all
> +linux-firmware-broadcom-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-dev-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-135-6-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-3160-7-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-3160-8-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-3160-9-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6000-4-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6000g2a-5-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6000g2a-6-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6000g2b-5-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6000g2b-6-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6050-4-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-6050-5-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-7260-7-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-7260-8-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-7260-9-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-7265-8-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-7265-9-0.0+git0+3161bfa479-r0.all
> +linux-firmware-iwlwifi-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-marvell-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-radeon-0.0+git0+3161bfa479-r0.all
> +linux-firmware-radeon-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ralink-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ralink-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-rtl-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-rtl8192ce-0.0+git0+3161bfa479-r0.all
> +linux-firmware-rtl8192cu-0.0+git0+3161bfa479-r0.all
> +linux-firmware-rtl8192su-0.0+git0+3161bfa479-r0.all
> +linux-firmware-sd8686-0.0+git0+3161bfa479-r0.all
> +linux-firmware-sd8787-0.0+git0+3161bfa479-r0.all
> +linux-firmware-sd8797-0.0+git0+3161bfa479-r0.all
> +linux-firmware-ti-connectivity-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-vt6656-0.0+git0+3161bfa479-r0.all
> +linux-firmware-vt6656-license-0.0+git0+3161bfa479-r0.all
> +linux-firmware-wl12xx-0.0+git0+3161bfa479-r0.all
> +linux-firmware-wl18xx-0.0+git0+3161bfa479-r0.all
>
> Edward Vidal Jr. e-mail develone at sbcglobal.net 915-595-1613
--
"Do or do not. There is no try"
Yoda Master
More information about the yocto
mailing list