[yocto] [meta-raspberrypi][PATCH 3/5] linux-raspberrypi: Add 3.14 support
Petter Mabäcker
petter at technux.se
Fri May 8 14:49:03 PDT 2015
Add basic support for Linux 3.14, cherry-pick changes from 3.18.y in
order to solve some debugfs warnings and get better support
for i2s for BCM2708.
- 3.14 lacks BCM2709 support and will not by default be able to use for
raspberry pi 2.
Below warnings still exists they are harmless and exists due to that
snd_soc_pcm512x is triggered to be loaded twice. The problem is solved
after device tree support for the driver was introduced in 3.18.y and no
easy solution exists to solve this problem on older kernel versions (see
https://github.com/raspberrypi/linux/issues/662 for more info).
pcm512x 1-004c: Failed to reset device: -5
pcm512x: probe of 1-004c failed with error
Remove sl030raspberrypii2ckernel.patch since it will not apply anymore
and its content seems to be obsolite after cherry-picking
'558d0bf Fix grabbing lock from atomic context in i2c driver'.
[Support #57]
Signed-off-by: Petter Mabäcker <petter at technux.se>
---
.../0001-ASoC-Add-BCM2708-fixes.patch | 263 +++++++++++++++++++++
...ng-lock-from-atomic-context-in-i2c-driver.patch | 235 ++++++++++++++++++
recipes-kernel/linux/linux-raspberrypi_3.14.bb | 9 +
3 files changed, 507 insertions(+)
create mode 100644 recipes-kernel/linux/linux-raspberrypi/0001-ASoC-Add-BCM2708-fixes.patch
create mode 100644 recipes-kernel/linux/linux-raspberrypi/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
create mode 100644 recipes-kernel/linux/linux-raspberrypi_3.14.bb
diff --git a/recipes-kernel/linux/linux-raspberrypi/0001-ASoC-Add-BCM2708-fixes.patch b/recipes-kernel/linux/linux-raspberrypi/0001-ASoC-Add-BCM2708-fixes.patch
new file mode 100644
index 0000000..26c71b8
--- /dev/null
+++ b/recipes-kernel/linux/linux-raspberrypi/0001-ASoC-Add-BCM2708-fixes.patch
@@ -0,0 +1,263 @@
+From e73a69601c65103b0e032e6093af0f00a1e1af3a Mon Sep 17 00:00:00 2001
+From: Florian Meier <florian.meier at koalo.de>
+Date: Fri, 22 Nov 2013 14:33:38 +0100
+Subject: [PATCH 1/2] ASoC: Add BCM2708 fixes
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+(cherry-pick remaining parts of
+730cb8a1216f9da3d097072cd9bb06e0db348172)
+
+bcm2708-i2s: Update bclk_ratio to more correct values
+
+Move GPIO setup to hw_params.
+
+This is used to stop the I2S driver from breaking
+the GPIO setup for other uses of the PCM interface
+
+Configure GPIOs for I2S based on revision/card settings
+
+With RPi model B+, assignment of the I2S GPIO pins has changed.
+This patch uses the board revision to auto-detect the GPIOs used
+for I2S. It also allows sound card drivers to set the GPIOs that
+should be used. This is especially important with the Compute
+Module.
+
+bcm2708-i2s: Avoid leak from iomap when accessing gpio
+
+bcm2708: Eliminate i2s debugfs directory error
+
+Qualify the two regmap ranges uses by bcm2708-i2s ('-i2s' and '-clk')
+to avoid the name clash when registering debugfs entries.
+
+Upstream-Status: Pending
+
+Signed-off-by: Petter Mabäcker <petter at technux.se>
+
+Conflicts:
+ sound/soc/bcm/Kconfig
+ sound/soc/bcm/Makefile
+ sound/soc/bcm/bcm2708-i2s.c
+---
+ sound/soc/bcm/bcm2708-i2s.c | 82 ++++++++++++++++++++++++++++++++++++---------
+ sound/soc/bcm/bcm2708-i2s.h | 35 +++++++++++++++++++
+ 2 files changed, 102 insertions(+), 15 deletions(-)
+ create mode 100644 sound/soc/bcm/bcm2708-i2s.h
+
+diff --git a/sound/soc/bcm/bcm2708-i2s.c b/sound/soc/bcm/bcm2708-i2s.c
+index 9976571..3fcb740 100644
+--- a/sound/soc/bcm/bcm2708-i2s.c
++++ b/sound/soc/bcm/bcm2708-i2s.c
+@@ -31,6 +31,8 @@
+ * General Public License for more details.
+ */
+
++#include "bcm2708-i2s.h"
++
+ #include <linux/init.h>
+ #include <linux/module.h>
+ #include <linux/device.h>
+@@ -38,6 +40,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/clk.h>
++#include <mach/gpio.h>
+
+ #include <sound/core.h>
+ #include <sound/pcm.h>
+@@ -46,6 +49,8 @@
+ #include <sound/soc.h>
+ #include <sound/dmaengine_pcm.h>
+
++#include <asm/system_info.h>
++
+ /* Clock registers */
+ #define BCM2708_CLK_PCMCTL_REG 0x00
+ #define BCM2708_CLK_PCMDIV_REG 0x04
+@@ -163,6 +168,9 @@ static const unsigned int bcm2708_clk_freq[BCM2708_CLK_SRC_HDMI+1] = {
+ #define BCM2708_DMA_DREQ_PCM_TX 2
+ #define BCM2708_DMA_DREQ_PCM_RX 3
+
++/* I2S pin configuration */
++static int bcm2708_i2s_gpio=BCM2708_I2S_GPIO_AUTO;
++
+ /* General device struct */
+ struct bcm2708_i2s_dev {
+ struct device *dev;
+@@ -174,6 +182,12 @@ struct bcm2708_i2s_dev {
+ struct regmap *clk_regmap;
+ };
+
++void bcm2708_i2s_set_gpio(int gpio) {
++ bcm2708_i2s_gpio=gpio;
++}
++EXPORT_SYMBOL(bcm2708_i2s_set_gpio);
++
++
+ static void bcm2708_i2s_start_clock(struct bcm2708_i2s_dev *dev)
+ {
+ /* Start the clock if in master mode */
+@@ -306,6 +320,25 @@ static int bcm2708_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
+ }
+
+
++static int bcm2708_i2s_set_function(unsigned offset, int function)
++{
++ #define GPIOFSEL(x) (0x00+(x)*4)
++ void __iomem *gpio = __io_address(GPIO_BASE);
++ unsigned alt = function <= 3 ? function + 4: function == 4 ? 3 : 2;
++ unsigned gpiodir;
++ unsigned gpio_bank = offset / 10;
++ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
++
++ if (offset >= BCM2708_NR_GPIOS)
++ return -EINVAL;
++
++ gpiodir = readl(gpio + GPIOFSEL(gpio_bank));
++ gpiodir &= ~(7 << gpio_field_offset);
++ gpiodir |= alt << gpio_field_offset;
++ writel(gpiodir, gpio + GPIOFSEL(gpio_bank));
++ return 0;
++}
++
+ static void bcm2708_i2s_setup_gpio(void)
+ {
+ /*
+@@ -314,20 +347,37 @@ static void bcm2708_i2s_setup_gpio(void)
+ * TODO Better way would be to handle
+ * this in the device tree!
+ */
+-#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
+-#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
++ int pin,pinconfig,startpin,alt;
++
++ /* SPI is on different GPIOs on different boards */
++ /* for Raspberry Pi B+, this is pin GPIO18-21, for original on 28-31 */
++ if (bcm2708_i2s_gpio==BCM2708_I2S_GPIO_AUTO) {
++ if ((system_rev & 0xffffff) >= 0x10) {
++ /* Model B+ */
++ pinconfig=BCM2708_I2S_GPIO_PIN18;
++ } else {
++ /* original */
++ pinconfig=BCM2708_I2S_GPIO_PIN28;
++ }
++ } else {
++ pinconfig=bcm2708_i2s_gpio;
++ }
+
+- unsigned int *gpio;
+- int pin;
+- gpio = ioremap(GPIO_BASE, SZ_16K);
++ if (pinconfig==BCM2708_I2S_GPIO_PIN18) {
++ startpin=18;
++ alt=BCM2708_I2S_GPIO_PIN18_ALT;
++ } else if (pinconfig==BCM2708_I2S_GPIO_PIN28) {
++ startpin=28;
++ alt=BCM2708_I2S_GPIO_PIN28_ALT;
++ } else {
++ printk(KERN_INFO "Can't configure I2S GPIOs, unknown pin mode for I2S: %i\n",pinconfig);
++ return;
++ }
+
+- /* SPI is on GPIO 7..11 */
+- for (pin = 28; pin <= 31; pin++) {
+- INP_GPIO(pin); /* set mode to GPIO input first */
+- SET_GPIO_ALT(pin, 2); /* set mode to ALT 0 */
++ /* configure I2S pins to correct ALT mode */
++ for (pin = startpin; pin <= startpin+3; pin++) {
++ bcm2708_i2s_set_function(pin, alt);
+ }
+-#undef INP_GPIO
+-#undef SET_GPIO_ALT
+ }
+
+ static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
+@@ -372,15 +422,15 @@ static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ data_length = 16;
+- bclk_ratio = 40;
++ bclk_ratio = 50;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ data_length = 24;
+- bclk_ratio = 40;
++ bclk_ratio = 50;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ data_length = 32;
+- bclk_ratio = 80;
++ bclk_ratio = 100;
+ break;
+ default:
+ return -EINVAL;
+@@ -746,7 +796,7 @@ static struct snd_soc_dai_driver bcm2708_i2s_dai = {
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE
+- // | SNDRV_PCM_FMTBIT_S24_LE : disable for now, it causes white noise with xbmc
++ | SNDRV_PCM_FMTBIT_S24_LE
+ | SNDRV_PCM_FMTBIT_S32_LE
+ },
+ .capture = {
+@@ -803,6 +853,7 @@ static const struct regmap_config bcm2708_regmap_config[] = {
+ .precious_reg = bcm2708_i2s_precious_reg,
+ .volatile_reg = bcm2708_i2s_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
++ .name = "i2s",
+ },
+ {
+ .reg_bits = 32,
+@@ -811,6 +862,7 @@ static const struct regmap_config bcm2708_regmap_config[] = {
+ .max_register = BCM2708_CLK_PCMDIV_REG,
+ .volatile_reg = bcm2708_clk_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
++ .name = "clk",
+ },
+ };
+
+diff --git a/sound/soc/bcm/bcm2708-i2s.h b/sound/soc/bcm/bcm2708-i2s.h
+new file mode 100644
+index 0000000..94fed6a
+--- /dev/null
++++ b/sound/soc/bcm/bcm2708-i2s.h
+@@ -0,0 +1,35 @@
++/*
++ * I2S configuration for sound cards.
++ *
++ * Copyright (c) 2014 Daniel Matuschek <daniel at hifiberry.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef BCM2708_I2S_H
++#define BCM2708_I2S_H
++
++/* I2S pin assignment */
++#define BCM2708_I2S_GPIO_AUTO 0
++#define BCM2708_I2S_GPIO_PIN18 1
++#define BCM2708_I2S_GPIO_PIN28 2
++
++/* Alt mode to enable I2S */
++#define BCM2708_I2S_GPIO_PIN18_ALT 0
++#define BCM2708_I2S_GPIO_PIN28_ALT 2
++
++extern void bcm2708_i2s_set_gpio(int gpio);
++
++#endif
+--
+1.9.1
+
diff --git a/recipes-kernel/linux/linux-raspberrypi/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch b/recipes-kernel/linux/linux-raspberrypi/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
new file mode 100644
index 0000000..907ed7b
--- /dev/null
+++ b/recipes-kernel/linux/linux-raspberrypi/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
@@ -0,0 +1,235 @@
+From 2c84355bf200f4d19d7078dee2c63011ad715395 Mon Sep 17 00:00:00 2001
+From: jeanleflambeur <catalin.vasile at gmail.com>
+Date: Sun, 1 Feb 2015 12:35:38 +0100
+Subject: [PATCH 2/2] Fix grabbing lock from atomic context in i2c driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+(cherry-pick from 558d0bfc8fe80ccdccee7f03e881a80965ec987c)
+
+2 main changes:
+- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment:
+ /* poll for transfer start bit (should only take 1-20 polls) */
+ This implies that the setup function can now fail so account for this everywhere it's called
+- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock.
+
+removed dead code and update comment
+
+fixed typo in comment
+
+Upstream-Status: Pending
+
+Signed-off-by: Petter Mabäcker <petter at technux.se>
+
+Conflicts:
+ drivers/i2c/busses/i2c-bcm2708.c
+---
+ drivers/i2c/busses/i2c-bcm2708.c | 88 +++++++++++++++++++++++++++++-----------
+ 1 file changed, 65 insertions(+), 23 deletions(-)
+
+diff --git a/drivers/i2c/busses/i2c-bcm2708.c b/drivers/i2c/busses/i2c-bcm2708.c
+index 05531db..886672c 100644
+--- a/drivers/i2c/busses/i2c-bcm2708.c
++++ b/drivers/i2c/busses/i2c-bcm2708.c
+@@ -67,6 +67,7 @@
+ #define BSC_S_TA 0x00000001
+
+ #define I2C_TIMEOUT_MS 150
++#define I2C_WAIT_LOOP_COUNT 40
+
+ #define DRV_NAME "bcm2708_i2c"
+
+@@ -85,6 +86,7 @@ struct bcm2708_i2c {
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
++ u32 cdiv;
+
+ struct completion done;
+
+@@ -108,10 +110,10 @@ static void bcm2708_i2c_init_pinmode(int id)
+ int pin;
+ u32 *gpio = ioremap(0x20200000, SZ_16K);
+
+- BUG_ON(id != 0 && id != 1);
++ BUG_ON(id != 0 && id != 1);
+ /* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
+ for (pin = id*2+0; pin <= id*2+1; pin++) {
+-printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
++ printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
+ INP_GPIO(pin); /* set mode to GPIO input first */
+ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */
+ }
+@@ -150,16 +152,16 @@ static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
+ }
+
+-static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
++static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi)
+ {
+- unsigned long bus_hz;
+ u32 cdiv, s;
+ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
++ int wait_loops = I2C_WAIT_LOOP_COUNT;
+
+- bus_hz = clk_get_rate(bi->clk);
+- cdiv = bus_hz / baudrate;
+- if (cdiv > 0xffff)
+- cdiv = 0xffff;
++ /* Can't call clk_get_rate as it locks a mutex and here we are spinlocked.
++ * Use the value that we cached in the probe.
++ */
++ cdiv = bi->cdiv;
+
+ if (bi->msg->flags & I2C_M_RD)
+ c |= BSC_C_INTR | BSC_C_READ;
+@@ -176,17 +178,25 @@ static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
+ - Both messages to same slave address
+ - Write message can fit inside FIFO (16 bytes or less) */
+ if ( (bi->nmsgs > 1) &&
+- !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
+- (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
++ !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
++ (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
+ /* Fill FIFO with entire write message (16 byte FIFO) */
+- while (bi->pos < bi->msg->len)
++ while (bi->pos < bi->msg->len) {
+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
++ }
+ /* Start write transfer (no interrupts, don't clear FIFO) */
+ bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST);
++
+ /* poll for transfer start bit (should only take 1-20 polls) */
+ do {
+ s = bcm2708_rd(bi, BSC_S);
+- } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)));
++ } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0);
++
++ /* did we time out or some error occured? */
++ if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) {
++ return -1;
++ }
++
+ /* Send next read message before the write transfer finishes. */
+ bi->nmsgs--;
+ bi->msg++;
+@@ -196,6 +206,8 @@ static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
+ }
+ }
+ bcm2708_wr(bi, BSC_C, c);
++
++ return 0;
+ }
+
+ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
+@@ -203,13 +215,15 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
+ struct bcm2708_i2c *bi = dev_id;
+ bool handled = true;
+ u32 s;
++ int ret;
+
+ spin_lock(&bi->lock);
+
+ /* we may see camera interrupts on the "other" I2C channel
+- Just return if we've not sent anything */
+- if (!bi->nmsgs || !bi->msg )
++ Just return if we've not sent anything */
++ if (!bi->nmsgs || !bi->msg) {
+ goto early_exit;
++ }
+
+ s = bcm2708_rd(bi, BSC_S);
+
+@@ -217,13 +231,16 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
+ bcm2708_bsc_reset(bi);
+ bi->error = true;
+
++ bi->msg = 0; /* to inform the that all work is done */
++ bi->nmsgs = 0;
+ /* wake up our bh */
+ complete(&bi->done);
+ } else if (s & BSC_S_DONE) {
+ bi->nmsgs--;
+
+- if (bi->msg->flags & I2C_M_RD)
++ if (bi->msg->flags & I2C_M_RD) {
+ bcm2708_bsc_fifo_drain(bi);
++ }
+
+ bcm2708_bsc_reset(bi);
+
+@@ -231,8 +248,19 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
+ /* advance to next message */
+ bi->msg++;
+ bi->pos = 0;
+- bcm2708_bsc_setup(bi);
++ ret = bcm2708_bsc_setup(bi);
++ if (ret < 0) {
++ bcm2708_bsc_reset(bi);
++ bi->error = true;
++ bi->msg = 0; /* to inform the that all work is done */
++ bi->nmsgs = 0;
++ /* wake up our bh */
++ complete(&bi->done);
++ goto early_exit;
++ }
+ } else {
++ bi->msg = 0; /* to inform the that all work is done */
++ bi->nmsgs = 0;
+ /* wake up our bh */
+ complete(&bi->done);
+ }
+@@ -265,21 +293,34 @@ static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
+ bi->nmsgs = num;
+ bi->error = false;
+
++ ret = bcm2708_bsc_setup(bi);
+ spin_unlock_irqrestore(&bi->lock, flags);
+
+ bcm2708_bsc_setup(bi);
+
+- ret = wait_for_completion_timeout(&bi->done,
+- msecs_to_jiffies(I2C_TIMEOUT_MS));
++ /* check the result of the setup */
++ if (ret < 0)
++ {
++ dev_err(&adap->dev, "transfer setup timed out\n");
++ goto error_timeout;
++ }
++
++ ret = wait_for_completion_timeout(&bi->done, msecs_to_jiffies(I2C_TIMEOUT_MS));
+ if (ret == 0) {
+ dev_err(&adap->dev, "transfer timed out\n");
+- spin_lock_irqsave(&bi->lock, flags);
+- bcm2708_bsc_reset(bi);
+- spin_unlock_irqrestore(&bi->lock, flags);
+- return -ETIMEDOUT;
++ goto error_timeout;
+ }
+
+- return bi->error ? -EIO : num;
++ ret = bi->error ? -EIO : num;
++ return ret;
++
++error_timeout:
++ spin_lock_irqsave(&bi->lock, flags);
++ bcm2708_bsc_reset(bi);
++ bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */
++ bi->nmsgs = 0;
++ spin_unlock_irqrestore(&bi->lock, flags);
++ return -ETIMEDOUT;
+ }
+
+ static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
+@@ -382,6 +423,7 @@ static int bcm2708_i2c_probe(struct platform_device *pdev)
+ cdiv = 0xffff;
+ baudrate = bus_hz / cdiv;
+ }
++ bi->cdiv = cdiv;
+
+ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n",
+ pdev->id, (unsigned long)regs->start, irq, baudrate);
+--
+1.9.1
+
diff --git a/recipes-kernel/linux/linux-raspberrypi_3.14.bb b/recipes-kernel/linux/linux-raspberrypi_3.14.bb
new file mode 100644
index 0000000..2edba32
--- /dev/null
+++ b/recipes-kernel/linux/linux-raspberrypi_3.14.bb
@@ -0,0 +1,9 @@
+LINUX_VERSION ?= "3.14.28"
+
+SRCREV = "e294028d7733a30f3befacc41d473c251096a515"
+SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.14.y \
+ file://0001-ASoC-Add-BCM2708-fixes.patch \
+ file://0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch \
+ "
+
+require linux-raspberrypi.inc
--
1.9.1
More information about the yocto
mailing list