[yocto] [meta-raspberrypi][PATCH] make sound work out of the box for raspberrypi2
Gary Thomas
gary at mlbassoc.com
Mon Mar 23 12:01:53 PDT 2015
On 2015-03-23 11:41, Andrei Gherzan wrote:
>
>
> On Mon, Mar 23, 2015 at 6:33 PM, Gary Thomas <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>
> On 2015-03-23 11:13, Alex J Lennon wrote:
>
>
>
> On 23/03/2015 18:08, Gary Thomas wrote:
>
> On 2015-03-23 10:42, Alex J Lennon wrote:
>
>
>
> On 23/03/2015 16:59, Gary Thomas wrote:
>
> On 2015-03-22 14:21, Andreas Müller wrote:
>
> Signed-off-by: Andreas Müller <schnitzeltony at googlemail.com <mailto:schnitzeltony at googlemail.com>>
> ---
> ...-during-boot-by-compiling-__SND_BCM2835-int.patch | 38
> ++++++++++++++++++++++
> recipes-kernel/linux/linux-__raspberrypi_3.18.bb <http://linux-raspberrypi_3.18.bb> | 8 +++--
> 2 files changed, 43 insertions(+), 3 deletions(-)
> create mode 100644
> recipes-kernel/linux/linux-__raspberrypi/0001-start-sound-__during-boot-by-compiling-SND___BCM2835-int.patch
>
>
> I tried this patch (which downloaded very strangely using Thunderbird)
> and the
> kernel rebuilt fine. I now have the audio detected, but still no
> sound :-(
> Again I've tried the internal (phono) speakers as well as HDMI audio.
>
> Just to prove a point on the [brand new] hardware, I installed
> OpenELEC (XBMC)
> and it works fine using the HDMI audio. Sadly when I tried Raspbian
> and Ubuntu
> there was no sound either...
>
> Were you (Andreas) able to get any sound with this patch?
>
>
> Sorry to jump in on your conversation Gary but I am also doing some bits
> and pieces with meta-raspberrypi myself to test out my new-ish RPiv2.
>
> I'll have a look at changing the kernel configuration here later, but I
> did also try changing TEST_MODE in the config.txt which is billed as
> giving analogue audio and video out at startup. Sure enough I hear the
> startup beeps.
>
> Perhaps this would enable you to verify the hardware is working too?
>
>
> Verified - this works. Still no sound when I boot Poky/Yocto.
>
> Have you tried audio output from Linux?
>
>
> OK that's something then. I'm in the middle of some i.MX6 builds at the
> minute but will look at this with the meta-raspberrypi kernel later and
> come back to you. I suspect I will see the same as you.
>
> I don't have anything capable of HDMI audio about here so will output a
> wav file or something to the analogue jack. What's your simplest test case?
>
>
> Use gstreamer:
> # gst-launch audiotestsrc ! alsasink
>
>
> I think I tested sound with omxplayer on rpi2... this is pretty strange.
I just tried it with omxplayer - still nothing, sorry.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the yocto
mailing list