[yocto] [meta-raspberrypi][PATCH 0/1] layer.conf: set high layer priority

[Petter Mabäcker]

2015-03-11 10:39 skrev Andreas Müller: 

> On Wed, Mar 11, 2015 at
7:53 AM, Petter Mabäcker <petter at technux.se> wrote:
> 
>> I have created
a new ticket for the raspberrypi2 problem:
http://redmine.gherzan.com/issues/52 [1] For the raspberrypi problem I
cannot reproduce this problem. For me it looks good using below
revisions for poky and meta-raspberrypi: meta-raspberrypi: 57c8e6b
rpi-base.inc: Include the RPI2 DTB poky: 0aff275 layer.conf: bump
version as error-report interface changed Andreas: Can you please
specify revisions you are using for poky and meta-raspberrypi? Would be
great if you also can mail me log.do_fetch and log.do_patch (if such
exists I understand it as it bails at do_fetch form your mail..) found
in:
> 
> Don't have logs here but 10-evdev.conf was not found. I
checked: By
> increasing layer priority the fitting path to
meta-raspberrypi was
> missing.
> 
> I am using
angstrom/oe-core/meta-oe++/meta-qt5 and several bsp layers
> (e.g
meta-ti/meta-gumstix-community/meta-fsl-arm/meta-raspberrypi/meta-beagleboard-common..)
>
- can give further details later (have them at home).
> 
> What I don't
understand so far: Why is this patch necessary and what
> was intended
to fix?
> 
> Andreas

Ok, interesting. That explains why I cannot
reproduce the problem. The reason for the changeset is to ensure that we
have a higher prio in meta-raspberrypi then in all its depended layers
(currently meta-oe and meta-multimedia) since we always want to override
with meta-raspberrypi specific stuffs in this case. So it doesn't solve
a specific problem, but it prevent us for getting problems like the one
you obviously has seen in your configuration due to this change. 

It
might (at least currently) be OK to set layer prio = 7 in
meta-raspberrypi, 9 was just to have some marginal. But it's not sure
that "7" is enough without any modifications in some of the layers you
are using. Can you give me the output of below command from your project
(it will help me to understand where the problem really lies)? 

$
bitbake-layers show-layers 

Cheers, Petter 

Links:
------
[1]
http://redmine.gherzan.com/issues/52
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150311/e791924a/attachment.html>